User Panel
Originally Posted By Piledriver2235:
Yes, my hope is they'd come out with a delayed blowback upper that would mate to their AR9mm lowers. Many people have much time/money invested with Colt & Glock pattern dedicated and Hahn block 9mm AR lowers (SBR's, Expensive triggers, Large quantity of mags, etc) Delayed blowback has many advantages over Blowback. CMMG is making a radial delayed upper, but it is pretty dependent on using their Guard lower unless you want to make some modifications. It looks like you can make them work with a Glock mag AR lower with minor modifications. Making them work with Colt mags may be possible, but I haven't seen anything definite yet. As cool as the PSA Mp5 is (I'd probably buy one) If they'd come out with a delayed blowback that would be as simple as push two pins on your existing 9mm AR lower, I think it'd sell like hotcakes. View Quote View All Quotes View All Quotes Originally Posted By Piledriver2235:
Originally Posted By Undefined:
Originally Posted By Piledriver2235:
Really interested in seeing these answered. If its straight blowback you can keep it. If it is roller delayed, My suggestion for a new product, is to make and sell a delayed upper to work with your existing colt and glock pattern Ar9 lowers. If you can do this, you won't be able to make the uppers fast enough. The USPSA PCC crowd alone will swamp you with backorders Is your intent for them to come out with an AR-15 upper receiver that is roller delayed (instead of straight blowback, piston driven, or direct impingement)? Delayed blowback has many advantages over Blowback. CMMG is making a radial delayed upper, but it is pretty dependent on using their Guard lower unless you want to make some modifications. It looks like you can make them work with a Glock mag AR lower with minor modifications. Making them work with Colt mags may be possible, but I haven't seen anything definite yet. As cool as the PSA Mp5 is (I'd probably buy one) If they'd come out with a delayed blowback that would be as simple as push two pins on your existing 9mm AR lower, I think it'd sell like hotcakes. Personally, I'd rather just pay another $200 in tax stamp (and another $300 - $600 when Bill Geissele decides to make a HK trigger pack) and just get a MP5 instead of some dildorific AR pattern 9mm frankengun. Granted, building a proper roller locked upper for a platform like an AR seems like dropping a Corvette engine in a Yugo. |
|
Contact the NRA
Wayne LaPierre (703)267-1020 [email protected] Christopher W Cox (703)267-1250 [email protected] Contact the NRA Board of Directors http://www.theguncollective.com/nra |
Stolen Firearm: Colt AR15, Serial # SP342380, 16" carbine. Stolen in California by Kevin Ayres, and taken to Missouri.
|
I would like to see this in Mlok.
|
|
|
I suggest we trade a question mark in for a maybe.
IA, USA
|
Carry handle for PA10 that fits properly. IIRC the only current options are DPMS and Armalite. Armalite requires mods to both upper and handle, DPMS mounts right on, but both hang over the upper by about 1/8" on the front. Not a huge issue like I've said, but at the same time a properly fitting option would be great.
|
WARNING-this post contains words or thoughts that may at some point be discovered by the state of California to cause cancer.
|
KS47......... Fix what you got before you open a new can of worms.
|
|
|
How about some DLC coated milspec BCG's. and tell the Brass that we want to see a partnership with silencer shop to put the automated kiosk into the brick and mortar shops in SC to make suppressor purchases easier.
|
|
|
Any news on the PSA MP5?
|
|
|
I suggest we trade a question mark in for a maybe.
IA, USA
|
|
WARNING-this post contains words or thoughts that may at some point be discovered by the state of California to cause cancer.
|
Originally Posted By shack357:
What? Did I get the only good one they made? Biggest issue with mine was I had to slightly modify both my upper and an Armalite carry handle to be able to install it. Considering it's not designed for an Armalite handle, that's pretty much a nonissue. View Quote View All Quotes View All Quotes Originally Posted By shack357:
Originally Posted By Kalashnikev101: PA-10 didn't work, . |
|
|
...let me clue you in. I am not in danger, Skyler. I AM the danger. A guy opens his door and gets shot and you think that of me? No. I am the one who knocks!
|
How about an HK G41 clone? If you're already getting into the roller lock game, may as well make something that can capitalize on those wanting a roller lock that takes common mags.....
|
|
<**Me:**> I just spent 95% of my paycheck on LaRue stuff, within 30 minutes of getting paid. < **mfingar:**> For what it's worth, Dillo Dust is great on Ramen.
|
Originally Posted By Sanlanman:
OK, MP5 for 2018, then how about a US made FAL rifle for 2019. DSA is your only competition. View Quote also someone mentioned the price of mp5 mags, if psa's making the gun, im pretty sure they'll make mags.. and i bet that they'll lower the price of the mags too, if enough are produced. |
|
|
How about a clear definition of the product quality tiers.
P-tac Freedom LIberty Premium Premium CHF etc. |
|
|
|
Love your stuff! Friend put me on to PSA a couple years ago and I have since sent you guys a few thousand bucks. Have five different CHF barreled uppers, they are amazing. 16-inch mid-length is a 1 MOA shooter and is yet to be free floated.
Would love to see... CHF 14.5-inch M4 barrel. Simple. CHF 14.5-inch lightweight carbine barrel (as the Colt 653) CHF 11.5-inch barrel. 45ACP lower made to take UMP mags (and please no holes in the trigger guard) Maybe even a CHF 16-inch mid-length medium or heavy barrel for RECCE type build. Thanks for all the great stuff! |
|
|
Finally found out how to make an account on here haha. I would definitely like to see more A2 uppers/rifle kits in stock. I saw them in stock twice at the end of last year, wasn't able to purchase them. Are you all planning on bringing them back in the future?
|
|
|
Originally Posted By Wampusfish:
Finally found out how to make an account on here haha. I would definitely like to see more A2 uppers/rifle kits in stock. I saw them in stock twice at the end of last year, wasn't able to purchase them. Are you all planning on bringing them back in the future? View Quote |
|
|
I suggest we trade a question mark in for a maybe.
IA, USA
|
Originally Posted By Wangstang: Pretty sure they weren't real A2's. Every time I've checked, they've been flat tops with carry handles on top. View Quote |
WARNING-this post contains words or thoughts that may at some point be discovered by the state of California to cause cancer.
|
1. When looking for barreled upper assemblies it would be nice if the customer could filter their choices by barrel type/finish.
2. Ammo deals with GI mags?? 3. Lowers with logo options. In all honesty you guys are doing a great job! Keep up the good work! The product you get for your money is unreal. My wife, brother and sister in law and I are taking a trip to Savannah in May. Make no mistake we will be doing the pilgrimage to the Store in Ridgeland. |
|
Ministry should write a song named " Josiah Built My Hotrod"
" Remember if your not pissing off the assholes , you're an asshole" - Ted Nugent |
short barrel .22lr uppers
|
|
Duct tape is silver, silence is golden
Teener crew call sign-brother fucker |
22" 6.5CM and 22" 224 Valkyrie uppers .... I'd like to squeeze out as much velocity as possible from those rounds.
And 6.5 Grendel uppers...and bolts. |
|
*Hold on to your AR-15s. Their magic must be very powerful, or they wouldn’t want them.*
JAFOM.... Just another fat old man. |
16" railed PA 10 Nitride m-lok mid-length complete upper
5.56 Nitride 14.7" mid-length pinned upper with a pencil barrel and a 1/8 twist. For around $200 shipped, I think they would sell well. |
|
|
Stainless barrel = more accurate. Nitride barrel = more durable. Nitride stainless barrel = more accurate and durable.
1-8 twist stainless nitride would be very cool. Stainless nitride pencil barrel would be cool too. |
|
|
Per my thread, more CHF uppers with free floating handguard options.
|
|
|
|
AR lowers that say... Maximum Amount of Freedom.
|
|
*Hold on to your AR-15s. Their magic must be very powerful, or they wouldn’t want them.*
JAFOM.... Just another fat old man. |
Glock slides.
|
|
|
|
How about a unicorn. A semi Stoner 63. You have but to look at the Stoner thread in the retro forum to see that there is a demand. It doesn't have to be a full on clone, either. Just make it a better clone than the Robinson M96.
ka |
|
|
80% lowers of all of your models. I want one of your 9mm and 308 lowers in 80% form
ETA: Well, more than one but right this minute I have parts on order for one of each. |
|
Keep your powder dry.
|
I didn't read any of the replies () but I'd like to put my two cents in for chrome lined pencil BBL's.
|
|
Your life is not my fault.
|
When you start selling 6.5 grendel parts, please have a 12.5" barrel option!
|
|
|
10.5 & 11.5 CHF Uppers and barrels would be nice! Prefer ones with an A2 FSB like you all used to carry.
|
|
|
I've gotten into billet uppers and lowers of late. I looked for billet sets on your site and didn't find any. Specifically, I wanted a set that was completely ambidextrous. A cool looking billet set up with ambi controls, a match grade barrel and a nice trigger would be awesome.
|
|
|
How about a belt fed upper as new product offering?
|
|
|
One more suggestion for a chrome-lined, pencil-barreled upper. Preferably Carbine-gassed, ala a Colt 6720-clone. Thanks!
|
|
|
Retro ARs and parts
|
|
|
Looking for the 20 inch carry handle A2 upper/kit. Any word on when this will be back in stock?
|
|
|
I think it would be cool if you guys did a special one-off run of an AR lower with a poop flinging gremlin on it and have the selector switch say something like “no poo”, “poo” and “fling poo”. If you guys could get a variance from the ATF to do say a 200 lower special edition run that would be swell!!
|
|
|
I'll throw this out here too (And I'm sure it's been asked for already)....'A2 uppers (Stripped would be fine)....PLEASE....
|
|
Your life is not my fault.
|
AK47 Pistol with brace.
|
|
|
Originally Posted By Treadhead:
I'll throw this out here too (And I'm sure it's been asked for already)....'A2 uppers (Stripped would be fine)....PLEASE.... View Quote |
|
|
Any idea if you will get any 20" 1/7 5.56 rifle length CHF/CL no BCG/CH flat top barreled uppers w/ classic handguard (item #30796) in stock? Trying to finish an M16 style build and currently have your complete A2 lower, carry handle rear sight, premium BCG/CH, and just need the barreled upper. I've got the FN CHF/CL 16" mid length version of this upper on another build and love it which is why I want another in rifle length for this build.
|
|
|
Originally Posted By txscrpn86:
Any idea if you will get any 20" 1/7 5.56 rifle length CHF/CL no BCG/CH flat top barreled uppers w/ classic handguard in stock? Trying to finish an M16 style build and currently have your complete A2 lower, carry handle rear sight, premium BCG/CH, and just need the barreled upper. I've got the FN CHF/CL 16" mid length version of this upper on another build and love it which is why I want another in rifle length for this build. View Quote |
|
|
How about my white whale upper, A1/C7 receiver pencil profile carbine gassed barrel faux dissipator
|
|
|
Originally Posted By txscrpn86:
Any idea if you will get any 20" 1/7 5.56 rifle length CHF/CL no BCG/CH flat top barreled uppers w/ classic handguard (item #30796) in stock? Trying to finish an M16 style build and currently have your complete A2 lower, carry handle rear sight, premium BCG/CH, and just need the barreled upper. I've got the FN CHF/CL 16" mid length version of this upper on another build and love it which is why I want another in rifle length for this build. View Quote The Nitride version is on daily deal lately, and it is tempting, but I really really want the premium CHF. Love the FSB uppers. Looks like BCM doesn't even do a BFH 20" lately. Would also love a .625 FSP with pencil barrel CHF 10 or 11.5. I'd settle for nitride though. |
|
|
|
Just assembled my first AR lower today, using almost all PSA parts thanks to your awesome Father's Day deals.
Two suggestions - 1) Start carrying KVP (or similar brand) reduced weight trigger spring kits - one of these plus an EPT is an AWESOME combo to shoot with and is dirt cheap to purchase. Even with shipping from another vendor (sorry!!) , $80 for a complete LPK,the EPT, and the KVP spring set gives you a trigger that just can't be beat for less than twice the money. 2) Get the geeks to fire up their editors - What I'd like to see is a "build your own lower build kit" wizard on the site. The "turbo tax online of collecting AR parts to do a build". Let me buy what I need, and skip what I don't, and still get to take advantage of the good deals Select stock - A2, milspec 6 position, MOE, etc - your normal options Select grip - A2, Ergo (my fav), MOE, etc and so forth Select LPK - classic, freedom, w/ ambi safety or regular, etc - Select trigger - classic, freedom, EPT, etc Include lower pull weight spring set? Include a lower? Have you picked out an upper? Slap it all in my shopping cart, maybe apply a wizardly bundle discount of a few percent, and take my money. This way, I could get my A2 stock w/ EPT, lower pull weight springs, and Ergo grip, no extra parts left over. From this one build I have a left over A2 grip, a grip screw, an ambi safety, and a hammer/trigger spring set. For my PSA complete lower AR-9 I have a spare collapsing stock, A2 grip, standard trigger group, and due to the way I went about putting on the A2 stock and keeping it working happily with the 9mm buffer and carbine spring, a spare rifle buffer and spring. |
|
|
|
224 uppers with nitride barrels
|
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.