PSA Build Pic Thread: Post your PSA builds HERE. (Page 21 of 25)
|
Built about a year ago
Premium PSA Complete Lower PSA Upper receiver PSA Premium BCG and CH Millett 30mm scope rings with accessory rail on top Bushnell 1-4x24mm AR 223 scope Midwest Industries 12" SS Gen 2 Free float rail with accessory adapter and bipod adapter on bottom YHM Mid-length Gas kit with Low Profile Block .750 Wilson Combat Match Grade 16" SS Lightweight 1/7 Barrel with YHM Phantom Flash Hider 
</a>" />
 </a>" />
 </a>" /> </a>" />
 </a>" />
 </a>" />
|
|
PSA upper assembly- 5.56 chamber, 16" CHF barrel, 1/7 twist, 13" Keymod Hybrid rail
PSA lower receiver and lower parts kit Magpul MOE stock and grip AIM Surplus nickel boron BCG BCM charging handle Troy flip up sights KNS precision anti roll pins Precision armament M4-72 compensator I've put about 160 rounds through it, and I love it. 
|
Potentate plenipotentiary sans portfolio
Joined:
Mar 2007
Posts:
6433
EE: 100% (76)
USA
|
Rock Island parts assembled on a Palmetto Armory frame.
I'm sure it will need some tuning, and there are several parts that I could fit better, but it went together with no problem whatsoever. I ordered this frame and all the other parts to build a suppressor host, but haven't had the time to fit/assemble it. When I received the RIA parts from another Arfcom member, temptation overcame me........ Just left the PSA website, where I ordered another frame to 'replace' this one.
Can't shoot it yet. I forgot to order the staking tool for the plunger tube. 
The only part I didn't use from the RIA is the trigger. Essentially a RIA Tactical assembled on a Palmetto frame. 
Only detail of note is that the frame is a bit 'long' at the rear. I'll leave that alone for now, as I may fit a different barrel in the future. |
" If govt parsimony is economic madness, and debt-fuelled govt spending a recipe for riches, why aren't the Greeks bailing out the Germans?"
Potentate plenipotentiary sans portfolio
Joined:
Mar 2007
Posts:
6444
EE: 100% (76)
USA
|
Originally Posted By noel8743:
[URL=http://s1099.photobucket.com/user/rnoh/media/Mobile%20Uploads/2015-07/20150731_182215.jpg.html] Here you go: 
|
"I'd vote for a Magic 8 Ball or a Chia Pet before casting a vote for Lindsey Graham." ~Brohawk
Proud member of Team Ranstad.
Proud member of Team Ranstad.
Did a few builds in the past few months. First one is the PA9, built from PSA's initial 9mm carbine parts kits. Non-ramped bolt. No issues other than an out of spec magblock initially that PSA took care of by sending me another. Has a B5 systems front hand guard and pistol grip as well as a Daniel Defense buttstock.
Second, this is one of the 499.99 rifle kits that included the Vortex Spitfire 1x prism optic. The rifle kit was the standard 399.99 kit they sell so I either got a 250 dollar scope for 100 bucks or a 400 dollar rifle kit for about 250 bucks. Either way, with a 40 dollar Anderson lower, this is an inexpensive rifle. I did change out the furniture though and the pic below shows a Cavalry arms M4 style mid length hand guard, Bravo company mod0 stock and mod 3 pistol grip. 
Last but not least, I got one of the 289.99 dissipator uppers and put an old A1 vietnam era set of furniture I'd had since the late nineties or so to get a somewhat retro look AR. I got one of the A1 style detachable carry handles and put it on an Anderson lower with a PSA lower parts kit. I really like the look and feel. I know it's not a true retro due to several reasons, but I'm not going for 100% retro, just like the look. 
Darink300zx youtube channel |
My $299.99 "slick side" build, 1-9 twist HB NATO rifle. Put on Magpul MOE furniture just cause I like it. GG&G ambi single point sling attachment and ambi safety that I had laying around. RRA two stage trigger in a real old STAG arms lower I had laying around doing nothing. Magpul BUIS on top, this rifle doesn't need glass or anything fancy. KISS style rifle is exactly what I was looking for. No range report yet but soon. Upper is super tight to the lower, no rattle or shake whatsoever. Enjoy.
|
Fuckin' 13er for LIFE!!!!
PSA 16" premium w/ 11" hybrid free float Aero Gen 2 lower RRA LPK RRA 2 stage NM trigger @ 3.5lbs DPMS Rifle tube DPMS Rifle buffer JP Spring MBUS Sights MOE Rifle stock MOE Grip AIM Nitride BCG BCM Gunfigther CH Not pictured but coming tomorrow: Strike J comp PA 1-4x Burris PEPR Eventually: Vortex Strike Eagle 1-6x (backorder forever) Vortex cantilever mount |
Another 20" PSA build of mine. It started out as an A4 style build similar to the one I posted in here before but I decided to change it all up. It's wearing an Aimpoint PRO in this picture but I've since put a 1.25-4x Leupold VX-R patrol on it that used to be on another rifle. It's long and just a little heavier than most of my other rifles but it's by far the smoothest shooting. -PSA 20" CHF 1/7 upper. -PSA lower -Vltor A5 extension and buffer -Midwest Industries G3 lightweight m-lok handguard -SilencerCo specwar brake/mount |
I was like little Ralphie tearing open his Red Ryder BB Gun at Christmas when my upper & Aimpoint got here.
 IMG_4254 by TXBulldawg, on Flickr
PSA Blem Lower PSA LPK w/EPT Trigger PSA 14.7" CHF middy upper w/PSA BCG/CH Aimpoint H1 (PSA Black Friday deal) Larue LT660 mount Larue BUIS Magpul MIAD grip Magpul MOE handguards A1 stock Specter mag pouch Surefire G2 LED w/Malkoff drop-in IWC light mount IWC QD |
|
Here's my PSA AR-10, well before I had to return the upper to have it repaired/replaced as it wouldn't fully load the round. But hopefully it'll look like this again soon (with a better scope I have waiting for it). (removed pic's) because photobucket wants to be retarded. And that's nothin' but pure and simple old-fashioned Communism. |
Always check your 5 and 25 while watching your 6
Joined:
Nov 2015
Posts:
165
EE: 100% (3)
TX, USA
|
Well I got my upper back, I figured out what the issues was and fixed it myself. Now it's running flawlessly with some new glass. Love this rifle! (removed pic's) because photobucket wants to be retarded. And that's nothin' but pure and simple old-fashioned Communism. |
|
PSA lower on the top, freedom upper as well
I think the 1-4 came from psa too 
PSA lower .277 wolverine 18" in progress 
|
I wouldn't stand in front of a piss-filled supersoaker. Does that make it a good pistol? - Caboose314
I thought I was covered for 22 cans, but the NFAids is a bitch when it mutates - themagikbullet
I thought I was covered for 22 cans, but the NFAids is a bitch when it mutates - themagikbullet
Tu ne cede malis, sed contra audentior ito
Joined:
Feb 2009
Posts:
7099
EE: 100% (83)
FL, USA
16" stainless, with 15" MI rail Aero Lower Acog ta31f PSA ALG LPK, JP yelloe springs... awaiting MBT trigger. KAC 200-600m micro rear DD fixed front Surefire Brske PSA NIB BCG - LOOKS KOOL WITH SS BARREL :) SI CH-EL / endplate Light on vtac mount not attached in pic It's a shooter! |
12" CHF FN Barrel 5.56 1:7 11" SQR quad rail Ergo ladder covers Kac 200-600m micro rear sight DD fixed front sight Ta31 acog, gg&g mount Magpul k2 grip Shockwave pistol blade (I live a few blocks from the next state over, sbr are impractical to me), kak shockwave tube Vtac light mount, streamlight SI CH-EL Love this gun. 12" is nice and you can use an A2 FH without huge amounts of blast and concussion |
Tu ne cede malis, sed contra audentior ito
Joined:
Feb 2009
Posts:
7200
EE: 100% (83)
FL, USA
|
Here is my PA-10 build. Shoots like a dream, very little recoil. 50 Rounds fired, not a single mis-feed or FTF. Nice 3 inch groups at 100 yards without bags. My new favorite gun!
PSA PA10 Stripped Lower PSA PA10 Stripped Upper PSA PA10 Lower Parts Kit KAK 308 18 Inch SS Barrel KAK 308 BCG KAK LP Gas Block PSA PA10 Ejection Port Cover Assembly PSA PA10 Forward Assist Assembly PSA PA10 Buffer Tube Assembly Spikes Gas Tube - Mid-Length BCM Charging Handle Free Float Hand-guard Magpul MIAD Pistol Grip Magpul CTR Buttstock Bullet Button Conversion Muzzle Break Nikon Prostaff 4x12 Scope 
|
