User Panel
Posted: 1/21/2011 6:48:07 AM EDT
|
|
|
Uncle
Sams Confused Group |
|
|
|
|
|
Thanks Duffy
|
|
|
|
Uncle
Sams Confused Group |
Battle Arms Development
http://battlearmsdevelopment.com For LE/MIL discount, please email me at: [email protected] |
Originally Posted By Duffy:
Xcoastie, how about this http://i75.photobucket.com/albums/i314/Duffypoo/FED1.jpg Matching FDE levers Sure send it on over. Lower and all. The FDE levers are on my list. |
|
Uncle
Sams Confused Group |
We're sending more levers to Ernie Bray to get coated, this time it will include some foliage green too
|
|
Battle Arms Development
http://battlearmsdevelopment.com For LE/MIL discount, please email me at: [email protected] |
Originally Posted By Duffy:
In case you guys haven't seen thess pictures, the AXTS forged receiver and billet, fully ambidextrous receivers are both compatible with the 45 degree selector. They will have the Fire (pictogram) engraving situated in a manner that will work with both the 45 and 90 degree selector. AXTS forged receiver (picture courtesy of Rainier Arms) http://i75.photobucket.com/albums/i314/Duffypoo/ADAC45degreereceiver.jpg AXTS billet, fully ambidextrous receiver, photographer unknown (high res pictures to come) http://i75.photobucket.com/albums/i314/Duffypoo/AXTXbilletfullambireceiver.jpg http://i75.photobucket.com/albums/i314/Duffypoo/AXTXbilletfullambireceiverleft.jpg These pictures are of prototypes. Production models will have Fire engravings that are compatible with 45 and 90 degree selectors That billet lower looks incredible! |
|
"When you die, if you get a choice between going to Regular Heaven or Pie Heaven, choose Pie Heaven. It might be a trick, but if not…mmmmm, boy!" -Jack Handey, Deep Thoughts
|
There will be another billet receiver that's 45/90 degree compatible, some of the AR15.com members have already seen it, but we were asked to keep it down low until the manufacturer is ready to release the news to the public. These lowers won't just be announced, they'll be AVAILABLE!
|
|
Battle Arms Development
http://battlearmsdevelopment.com For LE/MIL discount, please email me at: [email protected] |
|
Nice pics Q!
|
|
Battle Arms Development
http://battlearmsdevelopment.com For LE/MIL discount, please email me at: [email protected] |
What kind of lower is that? Has it been refinished? The rollmarks look... off. They look more like engravings. Can you show us more of the lower?
ETA: Don't mean to stomp- just got my BAD-ASS yesterday and installed it, wish I had pictures to share! Standard 90 degree throw, full size left side, short thin right side, and in true "Duffy style" Kryloned to match the rest of my receiver immediately! Will definitely be grabbing a few more for my other rifles, and once I've got a digital camera again I'll definitely post some pictures up of it, between the BAD-ASS and IWC 2-1 Point Tri-Glides I got, I think my M4 is damn near in my "perfect" configuration! I know it says Colt... but the rollmark on the magwell would imply that it's "U.S. Property" marked, I know there's a few transferable A1s out there with property marks, but exceedingly few A2s, which this lower appears to be. Also, the sear pin... just doesn't look right. ~Augee |
|
|
It says it's a Colt, it has the auto sear hole but the Auto marking is masked by the selector.
Which is kind of strange, the selector on it is a semi auto 90 degree |
|
Battle Arms Development
http://battlearmsdevelopment.com For LE/MIL discount, please email me at: [email protected] |
Boy, you guys are sharp. I just wanted to show off the BADASS.
It was a custom finished lower, yes the auto sear pin is a bit awkward, but its purely cosmetic, it is not actually a pin. Hence the semi selector. |
|
|
That makes sense, I kept thinking I had not seen the sear pin stick out like that before
They are nice pics, how do you keep the rifle so clean? |
|
Battle Arms Development
http://battlearmsdevelopment.com For LE/MIL discount, please email me at: [email protected] |
Oh, it gets used all right, the exception was that it's new build.
I often do a photo shoot after each build before I take them out. I look forward to your other products. |
|
|
We're busy beavers these days, we're working on the 6th lever, CASS-3P in semi auto, and other prototypes
|
|
Battle Arms Development
http://battlearmsdevelopment.com For LE/MIL discount, please email me at: [email protected] |
Stick
[email protected] www.rainierarms.com (253) 218-2999 Office (253) 218-2998 FAX www.weaponevolution.com http://www.flickr.com/photos/stickgunner |
Ah the AXTS 45/90 degree compatible receiver!
|
|
Battle Arms Development
http://battlearmsdevelopment.com For LE/MIL, and firefighter discount, please email me at: [email protected] |
Uncle
Sams Confused Group |
Very nice
|
|
Battle Arms Development
http://battlearmsdevelopment.com For LE/MIL, and firefighter discount, please email me at: [email protected] |
Originally Posted By Duffy:
Very nice Yes they are. Best Ambi Safety on the Market, Period. |
|
Uncle
Sams Confused Group |
Thanks!
When CASS-3P, SA (semi auto) comes out, it'll have a shot at that title. Though the CASS-3P family doesn't have as many lever options as the current semi auto 45 and 90 degree selectors, so it may retain the best selector crown for a little longer |
|
Battle Arms Development
http://battlearmsdevelopment.com For LE/MIL, and firefighter discount, please email me at: [email protected] |
"The strongest reason for people to retain the right to keep and bear arms is, as a last resort, to protect themselves against tyranny in government." -- (Thomas Jefferson)
Joe NRA Life Member Iowa |
I don't have that many on my rifles Well actually there are a few, mostly prototypes |
|
Battle Arms Development
http://battlearmsdevelopment.com For LE/MIL, and firefighter discount, please email me at: [email protected] |
Originally Posted By Duffy:
I don't have that many on my rifles Well actually there are a few, mostly prototypes I have seven sets of your fine product |
|
"The strongest reason for people to retain the right to keep and bear arms is, as a last resort, to protect themselves against tyranny in government." -- (Thomas Jefferson)
Joe NRA Life Member Iowa |
Make sure you hit me for the new patches when they come out
|
|
Battle Arms Development
http://battlearmsdevelopment.com For LE/MIL, and firefighter discount, please email me at: [email protected] |
Stick
[email protected] www.rainierarms.com (253) 218-2999 Office (253) 218-2998 FAX www.weaponevolution.com http://www.flickr.com/photos/stickgunner |
mmmmmmmmmmmmmmmmmm
|
|
" Not all those who wander are lost."
|
Shit has to be put to bed so butts can heal and move on to the next bullshit topic. This use to be a GUN forum. Now it's a freaking purse fight gone nation wide.-RABIDFOX50
READ MORE, POST LESS.... |
Thank you! Glad you were able to get the screw out
|
|
Battle Arms Development
http://battlearmsdevelopment.com For LE/MIL, and firefighter discount, please email me at: [email protected] |
Shit has to be put to bed so butts can heal and move on to the next bullshit topic. This use to be a GUN forum. Now it's a freaking purse fight gone nation wide.-RABIDFOX50
READ MORE, POST LESS.... |
Nice set up, it looks....too clean
|
|
Battle Arms Development
http://battlearmsdevelopment.com For LE/MIL, and firefighter discount, please email me at: [email protected] |
Originally Posted By Duffy:
Nice set up, it looks....too clean That will be fixed shortly. |
|
Shit has to be put to bed so butts can heal and move on to the next bullshit topic. This use to be a GUN forum. Now it's a freaking purse fight gone nation wide.-RABIDFOX50
READ MORE, POST LESS.... |
The only rifle I have that's clean is the one I have to keep to shoot product pictures with
|
|
Battle Arms Development
http://battlearmsdevelopment.com For LE/MIL, and firefighter discount, please email me at: [email protected] |
Does the short rigiht side piece interfere with a knuckle if you use a high hold? The only ambi selector I've had success with so far is the Colt.
|
|
"In his mind he was commanding troops; he had the right to interfere and this he believed to constitute command." Hemingway
|
With the 90 degree, all the levers will, though the short-thin lever has the least interference, but then it's tiny and not as easy to use. So then it is the extent of interference we're trying to decrease and mitigate, but not eliminate, with a 90 degree legacy selector arrangement, this is a design constraint.
With a 45 degree selector, even a short lever will still come in contact with the trigger finger in a high hold. This should be considered acceptable, HK burst pack on the roller locked systems and G36 all share the same traits. On an HK burst pack, when the selector is set to auto, the tip of the lever comes in contact with the trigger finger. The only solution is to reverse the orientation of the lever, the picture below shows a 45 degree selector with the levers reversed: Safe still places the lever parallel to the bore, though it now looks like an M16 set on Burst or Auto. Fire points the lever UP, there's nothing to interfere with the trigger finger. This can work if your receiver doesn't have selector stops. With a 90 degree selector, reversing the levers orientation doesn't work as well, as illustrated below: It still completely eliminates any interference, but the throw is simply too long to be intuitive, just as the 90 degree legacy selector arrangement is too long and not intuitive. |
|
Battle Arms Development
http://battlearmsdevelopment.com For LE/MIL, and firefighter discount, please email me at: [email protected] |
Nice! I should try it. In the past I've just shot left handed with my thumb on the same side as the rest of my fingers.
|
|
"In his mind he was commanding troops; he had the right to interfere and this he believed to constitute command." Hemingway
|
You can use the standard lever on both sides of the receiver to give you maximum surface area and purchase, as no matter how big the lever is, it won't come anywhere near your fingers
|
|
Battle Arms Development
http://battlearmsdevelopment.com For LE/MIL, and firefighter discount, please email me at: [email protected] |
"Slow is smooth, smooth is fast!"
|
Very nice, I'm going to get Centurion Arms rail to play with soon
|
|
Battle Arms Development
http://battlearmsdevelopment.com For LE/MIL, and firefighter discount, please email me at: [email protected] |
You will be nothing but satisfied Duffy!
|
|
"Slow is smooth, smooth is fast!"
|
|
I like your taste Augee
I've talked to Monty couple of times, we're still working on an IAR selector for him |
|
Battle Arms Development
http://battlearmsdevelopment.com For LE/MIL, and firefighter discount, please email me at: [email protected] |
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.