[ARCHIVED THREAD] - Micro Dagger. (Page 2 of 8)
|
Quoted: I don’t even have a gun for them but picked up a couple lol. Now just need the actual gun to become available! Quoted: Quoted: Quoted: Still in stock as of now. Unfortunately I missed it again. I don’t even have a gun for them but picked up a couple lol. Now just need the actual gun to become available! Magazines in stock now go get some |
|
Finally got out to the range with the upper. No I havent snagged any mags yet. Attached File Sight picture with a potato camera, trying to showing target distance Attached File First shot ever with a pistol optic was the one above A. The double tap follow up was the C. Attached File Had zero feeding issues, and no accuracy issues at all. PSA upper with Glock barrel and spring on 43x lower, all stock. Only issue is a few times the dot got dimmer between magazines. I think I was hitting the - button when releasing the slide, when I focused on where I was gripping the slide to not hit the button it didnt change brightness. Never having a red dot before, I really like it. Probably will add a few more. |
| Someone on reddit said you had to have an adapter plate for the 407k/507k but all the pictures show it without one. I have a 43x mos and I'm confused about this "modified shield cut" the holosun optics have. I went ahead and ordered a dagger micro slide that comes with the 407k. I guess I'll find out. |
|
Quoted: Someone on reddit said you had to have an adapter plate for the 407k/507k but all the pictures show it without one. I have a 43x mos and I'm confused about this "modified shield cut" the holosun optics have. I went ahead and ordered a dagger micro slide that comes with the 407k. I guess I'll find out. You need a plate or Dremel for those on the actual 43X MOS slide. Micro Dagger appears sounds like it is milled from the factory to work with them, which would still work with the RMSc. ETA: the RMSc cut has 4 studs that the optic sits on. The Holosuns only have 2 holes at the front, which are also too shallow for the RMSc cut studs. I assume PSA has eliminated the rear studs and shortened the front studs to work with the Holosuns or RMSc. The shape of the cut is still the same. Here is how I modified one of my 43X MOS slides... Attached File |
|
Quoted: You need a plate or Dremel for those on the actual 43X MOS slide. Micro Dagger appears sounds like it is milled from the factory to work with them, which would still work with the RMSc. ETA: the RMSc cut has 4 studs that the optic sits on. The Holosuns only have 2 holes at the front, which are also too shallow for the RMSc cut studs. I assume PSA has eliminated the rear studs and shortened the front studs to work with the Holosuns or RMSc. The shape of the cut is still the same. Ok, thank you. That's what I thought was the case with the actual MOS slide. I was unsure how the micro dagger slide worked with them. |
|
Quoted: My mags came in last week and my slide and optic just came in today. https://hosting.photobucket.com/images/nn167/musicman_83/20230526_114700.jpg https://hosting.photobucket.com/images/nn167/musicman_83/20230526_114727.jpg https://hosting.photobucket.com/images/nn167/musicman_83/20230526_115146.jpg https://hosting.photobucket.com/images/nn167/musicman_83/20230526_120226.jpg More mags may drop today around 11:30EST I hear. |
|
Quoted: Dang they were $29 when I ordered. Quoted: Quoted: Here it is almost 1300 EST and I'm thinking to myself, "No way will they still be in stock..." Welp, 2 slick slide order went right through, $32.99 each. Dang they were $29 when I ordered. Slick sides were a little more. I saw a post somewhere describing the difference |
|
Quoted: Slick sides were a little more. I saw a post somewhere describing the difference I see now that these "Micro Slick" finished mags have a different SKU. If you have a link to that post I'd appreciate it. I never received my original mags. I got an email a couple days after ordering that they had "some warehouse issue and would be 3 weeks before my order went out". Well that was back 5/15, over a month ago. I wonder if these newer ones are a replacement/update to the first?? Or are they offering two options. I called about my original order and was told it was still pending restock. Hope I'm not stuck in limbo. |
|
Quoted: I see now that these "Micro Slick" finished mags have a different SKU. If you have a link to that post I'd appreciate it. I never received my original mags. I got an email a couple days after ordering that they had "some warehouse issue and would be 3 weeks before my order went out". Well that was back 5/15, over a month ago. I wonder if these newer ones are a replacement/update to the first?? Or are they offering two options. I called about my original order and was told it was still pending restock. Hope I'm not stuck in limbo. Please PM me your order number and I will get you taken care of. Thanks, Josiah |
|
Quoted: The uppers are multiplying... https://www.ar15.com/media/mediaFiles/350579/20230610_165719_jpg-2846740.JPG @jafrush Any issues with your holsters? Does the slide have the same basic footprint as a Glock 43X slide or did you have to get a different holster? I just ordered a complete Micro Dagger Slide with PSA barrel, recoil spring, and Optic. I figure when... PSA releases the MD frames, I'll buy a tan one. |
|
Quoted: @jafrush Any issues with your holsters? Does the slide have the same basic footprint as a Glock 43X slide or did you have to get a different holster? I just ordered a complete Micro Dagger Slide with PSA barrel, recoil spring, and Optic. I figure when... PSA releases the MD frames, I'll buy a tan one. Quoted: Quoted: The uppers are multiplying... https://www.ar15.com/media/mediaFiles/350579/20230610_165719_jpg-2846740.JPG @jafrush Any issues with your holsters? Does the slide have the same basic footprint as a Glock 43X slide or did you have to get a different holster? I just ordered a complete Micro Dagger Slide with PSA barrel, recoil spring, and Optic. I figure when... PSA releases the MD frames, I'll buy a tan one. For the one with the light, I just ordered a 43x with TLR6 and optic holster off Amazon, fit that perfect. I'll grab the frames also when they're released and rebuild the two 43Xs that donated their frames. Have about a hundred rounds through each so far. I know, that's not a ton, but zero issues so far. |
|
Quoted: @drobs for the non-lighted one, I had to remove about a half inch of material on on the of the 43 kydex holsters I had laying around, then it worked perfectly. For the one with the light, I just ordered a 43x with TLR6 and optic holster off Amazon, fit that perfect. I'll grab the frames also when they're released and rebuild the two 43Xs that donated their frames. Have about a hundred rounds through each so far. I know, that's not a ton, but zero issues so far. Thanks Brother! |
|
Quoted: Yes, the sights cowitness nicely. Update: see below. https://i.ibb.co/d7RY3Hm/FDBDD15-A-E1-B4-4-D4-A-B65-E-17451-F7-D7-E4-A.jpg I put the stock Glock 43X barrel in the Dagger Micro slide. Is it normal to have this much visible gap? Edit: I could also be an idiot because I rarely shoot my 43X and maybe it’s completely normal. dunnof if its been mentioned , but that makes a visual, loaded chamber indicator... i would loooooove to buy a 5-6" glcok 34 length slide for one of these.... be all john wick n sheeeeeet |
|
Quoted: I'm still waiting for just any Micro Dagger... Quoted: Quoted: After today, we need the Trump Meme Micro Dagger! I'm still waiting for just any Micro Dagger... If I wasn't setting up competition guns for my son I'd have already bought something else. |
|
Quoted: I'm guessing I'll be buying a Glock or a Sig at this point. I wanted two Micro Daggers but I'm tired of waiting. If I wasn't setting up competition guns for my son I'd have already bought something else. More models of g48 size hit the site. Still oos of course... |
|
Quoted: It's getting pretty ridiculous at this point. Quoted: Quoted: We have offered complete guns on the website. They are not in stores yet. Thank you, Josiah It's getting pretty ridiculous at this point. Yeah, it's been a long (long) time coming; we're a few months away from it being 2 years since they first showed us a Micro at shot show 2022, and still just being teased. I gave up on Monday and bought a 43x. Not saying I won't still buy a Micro at some point in the future, but I am tired of playing "any day now" waiting on one. |
| Well there's other companies that sell AR parts, guns, ammo, ect... and that don't play these games. I don't think I'll be caring what psa does going forward. When a company can't even answer the questions of its customers that tells me they don't care about the customer to begin with. |