Posted about this a while back.
Sticks anywhere from 1/8 to 1/16 out of battery.
Not a short chamber. Remove barrel and rounds plunk in and drop out.
Sent it to RIA and they sent it back problem not solved, “doh, e’rythin’s fine.” Well… no, it’s not.
So before I unload (no pin intended) this thing on Cabela’s who will sell it to some other poor sap, help me if you can.
Like I said, rounds drop in all the way and drop out of an uninstalled barrel.
A week ago, I’m pondering this in my free time and I thought I had a flash of genius, “it’s the extractor! The channel is too narrow and it’s not letting the round line up!”
So I disassemble and place a dummy (no primer just a bullet in an empty case) under the extractor and slide the barrel into the slide and onto the round- she slides all the way home.
Now for the weird part- now in addition to failure to go into battery, the flippin round doesn't’ eject! It gets stuck like an Alabama tick and I have to push it down and drop it out of the mag well.
Any suggestions?
All the same ammo chambers and ejects fine out my M&P 2.0