User Panel
Posted: 2/19/2020 7:38:32 PM EDT
I bought a G22 gen 4 with three mags for $285 and free shipping ($305) after transfer.
Officer Store G22 It has night sights (a nice surprise) and is in G-VG share as advertised. It even looks clean. Do you guys that buy police trade in guns usually replace anything like the recoil spring before shooting them, or are they usually pretty much good to go? |
|
[#2]
With any USED Glock, I detail strip it, clean and inspect everything then reassemble and shoot it.
I probably don’t need to but I kinda like doing it ETA- Any pistol with an unknown round count, it’s not a bad idea to replace the recoil spring. I don’t always do that but it is cheap peace of mind. |
|
[#4]
Quoted:
I bought a G22 gen 4 with three mags for $285 and free shipping ($305) after transfer. Officer Store G22 It has night sights (a nice surprise) and is in G-VG share as advertised. It even looks clean. Do you guys that buy police trade in guns usually replace anything like the recoil spring before shooting them, or are they usually pretty much good to go? View Quote |
|
[#5]
Also, when did full sized Glocks get the G26/27 style recoil springs???
Is it a .40 thing, or a Gen4 thing? |
|
[#6]
|
|
[#7]
Since I took the 1-day armorer's course, I would do this:
Quoted:
With any USED Glock, I detail strip it, clean and inspect everything then reassemble and shoot it. I probably don’t need to but I kinda like doing it ETA- Any pistol with an unknown round count, it’s not a bad idea to replace the recoil spring. I don’t always do that but it is cheap peace of mind. View Quote View All Quotes View All Quotes Quoted:
With any USED Glock, I detail strip it, clean and inspect everything then reassemble and shoot it. I probably don’t need to but I kinda like doing it ETA- Any pistol with an unknown round count, it’s not a bad idea to replace the recoil spring. I don’t always do that but it is cheap peace of mind. Quoted:
Recoil Spring Assembly, clean and shoot |
|
[#8]
As clean and little shown wear to the 23 I just got from Aim, I did nothing, but shoot it...
It was damn near mint. The barrel has very slight wear. Steve |
|
[#9]
More than likely it should be gtg as purchased. I would take it apart, clean, lube, shoot. If you want to change anything I would change springs: trigger, recoil, and magazine.
|
|
[#10]
|
|
[#11]
|
|
[#12]
My cousin had a police trade in that would jam frequently and I figured it was the recoil spring. He replaced it and all good.
|
|
[#13]
Quoted:
I bought a G22 gen 4 with three mags for $285 and free shipping ($305) after transfer. Officer Store G22 It has night sights (a nice surprise) and is in G-VG share as advertised. It even looks clean. Do you guys that buy police trade in guns usually replace anything like the recoil spring before shooting them, or are they usually pretty much good to go? View Quote As others have said, do a complete teardown and detail clean. Inspect everything as you go. If it passes the recoil spring test, you can leave it in, although it is an inexpensive part to replace. The two most failure prone springs in the *pre-Gen 5 are the Slide Lock Spring (leaf spring for the takedown lever) and the trigger spring. I would replace those two and they are inexpensive as well. *pre-Gen 5 Those two springs were re-designed for Gen 5 |
|
[#16]
Not a sure if police trade Gen 4 gun may have a NY trigger in it, but my Gen 3 does and I am in the process of changing it as soon as my parts get here.
Easy to do |
|
[#17]
Thanks for the ideas guys.
I stopped and cleaned it. I'll be changing the NY trigger. The recoil spring seems fine, so I'll shoot it and see how it goes. |
|
[#18]
Quoted:
Thanks for the ideas guys. I stopped and cleaned it. I'll be changing the NY trigger. The recoil spring send fine, so I'll shoot it and see how it goes. View Quote If this spring breaks, the broken piece can be near impossible to get out. In later models, Glock changed this to a coil spring. |
|
[#19]
It hasn't been shot enough to require any new springs or anything. Just clean it and shoot it.
|
|
[#20]
I'd replace the recoil spring unit as it is very inexpensive (about $10) & your firearm has an unknown round count.
Other than that, go shoot it! |
|
[#21]
My last trade-in, a Gen 2 G19 from Aim, had a bit of mileage on it so in addition to a detailed cleaning, I got a complete spring kit from Glockparts.com and replaced them all. It was easy enough to do since I had it stripped all the way down, and IMO cheap peace of mind.
At the time their kits had all OEM parts, but it doesn't state that on the page now so I would ask before buying. https://www.glockparts.com/custom/GMSPR19EF.htm |
|
[#22]
|
|
[#23]
I agree with replacing the recoil spring assembly. It is cheap insurance.
|
|
[#24]
Yeah but you can tell a lot about looking at the finish of the firearm if there's very little holster wear there's a pretty good chance it doesn't have thousands of rounds through it
|
|
[#25]
I'd buy another police trade-in after shooting this.
It functioned perfectly with AE fmj and HST hollow points. |
|
[#26]
clean and lube, if your gun has allot of wear on the top of the barrel, you may need a new recoil spring, but if the exterior of the barrel looks nice, it wasn't shot much
|
|
[#27]
|
|
[#28]
Quoted:
Also, when did full sized Glocks get the G26/27 style recoil springs??? Is it a .40 thing, or a Gen4 thing? View Quote Clean that pistol until it is clean enough to eat off of. Pay particular attention to the striker pin assembly and the channel in the slide. It should be white-glove clean and reassembled dry. Remove the ejector housing from the frame and ensure that the trigger disconnector and the frame recess are free of gunk. Remove the magazine release button and ensure that recess is spotless, and clean the magazine well thoroughly. Those three areas are trouble spots a lot of people skip. Detail stripping and cleaning these areas will keep your pistol running trouble free. Also clean your magazines. They are simple do disassemble without special tools. Run a toothbrush soaked in solvent through the interior to remove caked on residue. Spray with brake clean to remove the solvent and grime, then wipe down with clean patches held in place with a different/clean toothbrush. I do this part with large, .50 cal patches I have for my black powder rifle. Being that you dont know how many rounds have been fired, I would replace the RSA, the trigger spring, the extractor spring, and the slide lock lever spring. All those parts will be less than $20. I forget the replacement interval for those springs, but it couldn't hurt for the piece of mind it would bring you to replace them. |
|
[#29]
|
|
[#30]
I was at GT Distributors today, they have a sale on all Glock complete spring kits. $9.00 if anyone wants to stock up...
|
|
[#31]
You know that moment when you realize that your Micro Roni you got for a G17 will work with your police trade in G22......
|
|
[#32]
|
|
[#33]
Quoted:
This. If you feel the need to replace shit, you should have bought a brand new gun. View Quote One of the great things about a Glock is it's simplicity. |
|
[#34]
Most police guns are carried a lot and shot a little. The get beat up, but seldom do part wear out. They just don't get that much use.
If you're not sure send it to Glock and have them go through it. They will replace anything that needs to be replaced. Otherwise shoot it first and see how it does. Usually springs are all you need. Magazine and recoil are the most critical. |
|
[#35]
I always replace the springs so I know the mileage on them and know when it is time to replace them on schedule. Springs are cheap and I hate ruined range trips because a pistol chocks or is having a problem.
|
|
[#36]
Quoted: While I sorta agree, I figured that $306 out the door was worth it even if there were a few parts in these police trade in guns that often need replacing. One of the great things about a Glock is it's simplicity. View Quote |
|
[#37]
Quoted: Mine was $290 out the door and it appeared unfired by the barrel wear. The only evidence of use was some seat belt scratches. Most of my newer glocks have been fired more and I don't feel compelled to change parts. View Quote It's a helluva bargain IMO. |
|
[#38]
|
|
[#39]
Quoted: Nope; but they are dealing with bulged barrels from squibs and the like View Quote They have an armorer that fixes that stuff for the officers, don't they? I guess I just assumed that they had a maintenance schedule and were fixed if major issues (squib/kaboom) arose. |
|
[#40]
Quoted:
So, isn't that one of the police trade in benefits? They have an armorer that fixes that stuff for the officers, don't they? I guess I just assumed that they had a maintenance schedule and were fixed if major issues (squib/kaboom) arose. View Quote View All Quotes View All Quotes Quoted:
Quoted: Nope; but they are dealing with bulged barrels from squibs and the like They have an armorer that fixes that stuff for the officers, don't they? I guess I just assumed that they had a maintenance schedule and were fixed if major issues (squib/kaboom) arose. |
|
[#41]
Quoted: So, isn't that one of the police trade in benefits? They have an armorer that fixes that stuff for the officers, don't they? I guess I just assumed that they had a maintenance schedule and were fixed if major issues (squib/kaboom) arose. View Quote |
|
[#42]
Quoted:
I bought a G22 gen 4 with three mags for $285 and free shipping ($305) after transfer. Officer Store G22 It has night sights (a nice surprise) and is in G-VG share as advertised. It even looks clean. Do you guys that buy police trade in guns usually replace anything like the recoil spring before shooting them, or are they usually pretty much good to go? View Quote |
|
[#44]
Quoted:
Yeah but you can tell a lot about looking at the finish of the firearm if there's very little holster wear there's a pretty good chance it doesn't have thousands of rounds through it View Quote View All Quotes View All Quotes |
|
[#45]
Tossing in my 2¢ - no afflilation with seller.
I also ordered 1, because of this thread and so did my FFL buddy. Price, Gen 4, and 3 mags - pulled the trigger. Will be my 1st Glock. Mine was $287 out the door ($285 + free shipping + $2 optional delivery insurance). Mine delivers tomorrow. His was delivered yesterday. He sent me pictures (not posting - for his privacy). Will share ... Photos showed VG condition, mild holster wear, butt of right side grip showed wear (I would assume - seat belt), Glock factory night sights, no back straps. He said, it had definitely been fired and needed cleaning. |
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.