Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Posted: 7/30/2020 1:31:17 PM EDT
are their any that are drop-in or do all need to be fitted? mine is a aggie made on FN tooling. the safety on it is very stiff and hard to move to fire. its the most accurate 9mm i own.
Link Posted: 7/30/2020 3:19:39 PM EDT
All will require some fitting. Some will just about drop in others will need more fitting. The variance interface with the sear will determines how much to take off. It is not hard if you understand how the gun works. The C&S part is my preferred aftermarket safety. There are better safeties but they are custom on custom guns.
Link Posted: 7/30/2020 6:05:18 PM EDT
[Last Edit: 7/30/2020 6:08:31 PM EDT by LastRites]
If your handy you could always add some steel to yours and silver solder it.
Link Posted: 7/30/2020 6:17:57 PM EDT
Link Posted: 7/30/2020 8:45:25 PM EDT
Most require fitting.  My smith is not fond of the job.
Link Posted: 7/30/2020 8:50:44 PM EDT
Top Top