GLOCK PICTURE THREAD PART II (Page 197 of 201)
|
@tct1000 what mag extensions are those?
|
|
My current 2 favorite handguns by a long stretch. I bought my first Glock in 1993 and have had at least one ever since. I have another pistol with a dot and I am still training with it. I am still not 100% certain of my capabilities so these aren't getting them yet. Attached File |
|
Originally Posted By ponykilr: @tct1000 what mag extensions are those? Originally Posted By ponykilr: https://milspin.com/products/milspin-extension-blank i like em |
A buddy of mine did a bob cut for me on my 34 slide. Added a cheap magwell and a +5 extension. This this is done now.  Had my local cerakoter do the 34 slide after the cut and also had them color match a DPP optic plate as well as an OEM Glock MOS cover plate for my new 19X MOS. Its dumb and minor but it calms my OCD, ha.  Found a deal on an RMR so this one is done now too.  |
|
Originally Posted By DavidY: That's even more ridiculous than the ACRO on a G43, and that's saying a lot. Of course I'm crazy enough that I would actually carry that  That's actually one of the best things I have seen on this website in months  Agreed...I love them both. 
|
Every normal man, at times, must be tempted to spit on his hands, hoist the black flag, and begin slitting throats.
Joined:
Aug 2025
Posts:
1
EE: 0% (0)
USA
Joined:
Aug 2025
Posts:
2
EE: 0% (0)
USA
|
Originally Posted By -Shaggs-: A buddy of mine did a bob cut for me on my 34 slide. Added a cheap magwell and a +5 extension. This this is done now. https://i.imgur.com/ox7RUVx.jpeg Had my local cerakoter do the 34 slide after the cut and also had them color match a DPP optic plate as well as an OEM Glock MOS cover plate for my new 19X MOS. Its dumb and minor but it calms my OCD, ha. https://i.imgur.com/B9Ys607.jpeg Found a deal on an RMR so this one is done now too. https://i.imgur.com/olHmlKU.jpeg I use the Burnt Bronze FCD plate on my 19X MOS. I had to wait a few weeks to get it, but it was worth it. Attached File |
"A bad day shooting beats a great day working!"
|
Originally Posted By jrs93accord: I use the Burnt Bronze FCD plate on my 19X MOS. I had to wait a few weeks to get it, but it was worth it. https://www.ar15.com/media/mediaFiles/76904/thumbnail__19__jpg-3613782.JPG Nice. Did you have to do any fitting with your FCD plate? Pic thread: got the second Vedder holster in today (G43X). 
|
¡Ahora sin chingas!
Member
Joined:
Feb 2022
Posts:
1734
EE: 100% (36)
GA, USA
|
Originally Posted By -Shaggs-: A buddy of mine did a bob cut for me on my 34 slide. Added a cheap magwell and a +5 extension. This this is done now. https://i.imgur.com/ox7RUVx.jpeg Had my local cerakoter do the 34 slide after the cut and also had them color match a DPP optic plate as well as an OEM Glock MOS cover plate for my new 19X MOS. Its dumb and minor but it calms my OCD, ha. https://i.imgur.com/B9Ys607.jpeg Found a deal on an RMR so this one is done now too. https://i.imgur.com/olHmlKU.jpeg FCD sells their plates in the Coyote bronze color to match. I sent a 47 slide out to get worked on, bob cut, ported, and refinished to match the 19X slide. It is going on a 19X frame. I installed a TTI Gen 4 carry magwell on the 19X frame, I just cut the front nub off and did some smoothing out of the radius on the front strap with a dremel. Fit perfectly. Attached File I don’t trust the factory MOS adapter plates, I’ve broken one and I’ve had friends who have broken a few over the years. I use the FCD plates on a few RMR and ACRO equipped MOS gun. They are excellent. https://www.forwardcontrolsdesign.com/OPF-G-RMR_p_224.html |
|
Attached File |
Life is like a box of chocolates, you never know what you're gonna get!
|
Gonna take this one out and see if the hump removal makes it better. I got the flat piece from OT Defense and so far the grip is much nicer. Attached File |
Be the change you want in this world.
|
Attached File Gen 5 Glock 21 MOS. Attached File Upgraded with a Vortex Defender ST |
Get this and get it straight: crime is a sucker's road and those who travel it wind up in the gutter, the prison or the grave. There's no other end- but they never learn.
|
Traded a M&P for this. Pretty happy with it, and now I need to get a holster for it. Not sure if I'm gonna keep the X300 on it or replace it with a TLR-1 or 7xhlAttached File That gun also made @finslayer83 go pick another up 
|
What have the Romans ever done for us?
Joined:
Jul 2008
Posts:
44536
EE: 100% (212)
TN, USA
|
Originally Posted By Amped: Traded a M&P for this. Pretty happy with it, and now I need to get a holster for it. Not sure if I'm gonna keep the X300 on it or replace it with a TLR-1 or 7xhlhttps://www.ar15.com/media/mediaFiles/179056/tempImagen0quD2_jpg-3618342.JPG That gun also made @finslayer83 go pick another up and a RMR.... Poof goes the money. |
Panem et Circenses
I have also learned from experience that the greater part of our happiness or misery depends upon our dispositions, and not upon our circumstances.
Kites rise highest against the wind, not with it. - Churchill
I have also learned from experience that the greater part of our happiness or misery depends upon our dispositions, and not upon our circumstances.
Kites rise highest against the wind, not with it. - Churchill
|
Originally Posted By MK318: FCD sells their plates in the Coyote bronze color to match. I sent a 47 slide out to get worked on, bob cut, ported, and refinished to match the 19X slide. It is going on a 19X frame. I installed a TTI Gen 4 carry magwell on the 19X frame, I just cut the front nub off and did some smoothing out of the radius on the front strap with a dremel. Fit perfectly. https://www.ar15.com/media/mediaFiles/557335/IMG_1347_jpeg-3613792.JPG I don’t trust the factory MOS adapter plates, I’ve broken one and I’ve had friends who have broken a few over the years. I use the FCD plates on a few RMR and ACRO equipped MOS gun. They are excellent. https://www.forwardcontrolsdesign.com/OPF-G-RMR_p_224.html I had seen the FCD plates but they were sold out when I was looking. I didn't feel like waiting, ha. My way was a little cheaper, I did get the OEM plate cerakoted to match as well, and I had mine back within a week. Works for me, haha. |
|
Are those EPS or EPS carry? What plate did you use to mount them? Originally Posted By sparky-kb: One with a quietener and one with a loudener... Same same but different. https://i.imgur.com/CkTfjXD.jpeg |
Joined:
Jan 2023
Posts:
106
EE: 0% (0)
IN, USA
|
Originally Posted By jtdam24: https://imgur.com/C2SCbJe https://imgur.com/dEsoYih https://imgur.com/kOtiPF5   
|
|
Originally Posted By DavidY: https://i.imgur.com/C2SCbJe.jpeg https://i.imgur.com/dEsoYih.jpeg https://i.imgur.com/kOtiPF5.jpeg Originally Posted By DavidY: Originally Posted By jtdam24: https://imgur.com/C2SCbJe https://imgur.com/dEsoYih https://imgur.com/kOtiPF5 https://i.imgur.com/C2SCbJe.jpeg https://i.imgur.com/dEsoYih.jpeg https://i.imgur.com/kOtiPF5.jpeg Wow thanks brother! |
|
Originally Posted By tct1000: https://www.ar15.com/media/mediaFiles/271151/gs2_jpg-3617572.JPG I don't know how I missed this but that looks really nice. Who did the work on the frame? |
Be the change you want in this world.
|
Originally Posted By patw: I don't know how I missed this but that looks really nice. Who did the work on the frame? Originally Posted By patw: Originally Posted By tct1000: https://www.ar15.com/media/mediaFiles/271151/gs2_jpg-3617572.JPG I don't know how I missed this but that looks really nice. Who did the work on the frame? Been a minute, but I think it was Landers Weapons Systems years ago |
Joined:
May 2025
Posts:
42
EE: 0% (0)
USA
|
Attached File New 43X MOS in Coyote to match the 19X. Glock has updated the optic cut to fit the Holosun K cut. I usually install a Trijicon dot but I did not want to use an adapter plate. Just installed the dot and so far I really like it. |
Free men do not ask for permission.
Member
Joined:
Dec 2023
Posts:
744
EE: 100% (31)
SC, USA
|
Originally Posted By DavidY: https://i.imgur.com/C2SCbJe.jpeg https://i.imgur.com/dEsoYih.jpeg https://i.imgur.com/kOtiPF5.jpeg Info on the knife and barrel please. |
|
Originally Posted By iMac1310: Info on the knife and barrel please. Originally Posted By iMac1310: Originally Posted By DavidY: https://i.imgur.com/C2SCbJe.jpeg https://i.imgur.com/dEsoYih.jpeg https://i.imgur.com/kOtiPF5.jpeg Info on the knife and barrel please. Ginsu 2000 and combat Armory Thrustmaster 6900  Actually, I have no clue. I reposted them for the person above that post
|
|
Originally Posted By cubie: https://www.ar15.com/media/mediaFiles/524411/IMG_8238_jpeg-3614400.JPG @cubie is that a factory molded FDE frame? |
|
Celebrating Glocktober with an Austrian molded FDE/peanut butter G17. Won’t be stock for long and will likely be my go to once she’s vetted and decked out. RMR, Ramjet, Cerakote, trigger, magwell, etc. Attached File |
|
Originally Posted By dsm600rr: https://www.ar15.com/media/mediaFiles/591584/IMG_5306_JPG-3639585.JPG @dsm600rr- Is that the Battlefield Green or ODG? I ordered a 17.5 in BFG tonight and I’m hoping that it is close to my G3 green furniture. Pic thread- 
|
¡Ahora sin chingas!
Member
Joined:
Dec 2023
Posts:
751
EE: 100% (31)
SC, USA
|
Originally Posted By m24shooter: @dsm600rr- Is that the Battlefield Green or ODG? I ordered a 17.5 in BFG tonight and I’m hoping that it is close to my G3 green furniture. Pic thread- https://www.ar15.com/media/mediaFiles/18486/IMG_9922-3642452.jpg It’s BFG |
|
Attached File |
Having a bayonet is the very definition of bringing a knife to a gun fight
|
The Glock and Koch isn’t real. It can’t hurt you. Attached File |
