|
Originally Posted By dwcopple:
you sure? Looks impressive. I'd open up shop.  Originally Posted By dwcopple:
Originally Posted By hvydg:
This is my first attempt at stippling. Lol thanks. I have been thinking about it. I actually have my ffl so I'm good to go. Working on a 17 now. Will post up some pics. It's recessed a lot but I'm not really happy with the borders. They don't "pop" like I think they should. Haha |
|
Originally Posted By SilentDeath12886:
For those with recessed borders on their stippled frames, do you feel the recessed borders? I am considering having Danger Close do the work, but the recessed borders looks quite prominent. You do but you don't. As for borders, DCA is the go to if you want the recessed, separated border. SSVI and several others use hard cut borders. This gets the stippling flush with the frame but doesn't leave the distinctive separated border. |
fla556guy: "When you have a shit-hole the answer is to flush it as fast as possible, not bathe in the shit."
|
Originally Posted By Trooper0007:
http://i1249.photobucket.com/albums/hh512/ry_da1/IMG_1284_zpsqstxuzlr.jpg 17 to 19 chop, undercut, lower finger lug removal, and stipple. My first time doing any grip mods. 
|
We use words like honor, code, loyalty. We use these words as the backbone of a life spent defending something!
Finally went to the dark side and got an aftermarket trigger for my 19 MOS. Before I was running a Gen 3 17 smooth-faced trigger. I honestly feel like the take-up and reset are pretty close. I will admit the flat face feels a lot better to me. I did install a Glock "-" connector along with a 4# striker spring. It lightened the pull up a bit but I am still going to polish the trigger bar on the TAC. All in all I'm pleased with my purchase of the Overwatch Precision TAC trigger. If anything the flat face shoe is tits.
|
|
Originally Posted By great308:
Not my first stipple job but first time I undercut the trigger guard. Came out good enough for me. all the goodies to make it go bang come on Friday. Need to get a tan x300 for it too. Is that DSG mag extension made by Taran Tactical? the one with the pin in the rear? and is that a ZEV magwell? Just wondering, b/c I was thinking of getting some mag extensions and my brother says his taran tactical's won't work with his magwell b/c the pin presses against the magwell. |
|
Yes those are taran +6 extensions and they do have the pin in the back that keeps them from coming off the magazine body.
The magwell is made by steel city arsenal and decided it over a zev cause it was somewhat the same style design, well made, comes in 3 colors, and only $70 shipped vs almost $100 for zev. I don't know about the zev but this magwell has a cutout that the pin fits into so it does not interfere with he magazine extension. |
|
Originally Posted By great308:
Yes those are taran +6 extensions and they do have the pin in the back that keeps them from coming off the magazine body. The magwell is made by steel city arsenal and decided it over a zev cause it was somewhat the same style design, well made, comes in 3 colors, and only $70 shipped vs almost $100 for zev. I don't know about the zev but this magwell has a cutout that the pin fits into so it does not interfere with he magazine extension. That's a good looking well! If I didn't already have a zev, I'd give that one a shot! |
|
Originally Posted By great308:
Yes those are taran +6 extensions and they do have the pin in the back that keeps them from coming off the magazine body. The magwell is made by steel city arsenal and decided it over a zev cause it was somewhat the same style design, well made, comes in 3 colors, and only $70 shipped vs almost $100 for zev. I don't know about the zev but this magwell has a cutout that the pin fits into so it does not interfere with he magazine extension. Any idea if that magwell will work with Vickers base pads? |
|
Originally Posted By Ianq:
Any idea if that magwell will work with Vickers base pads? Originally Posted By Ianq:
Originally Posted By great308:
Yes those are taran +6 extensions and they do have the pin in the back that keeps them from coming off the magazine body. The magwell is made by steel city arsenal and decided it over a zev cause it was somewhat the same style design, well made, comes in 3 colors, and only $70 shipped vs almost $100 for zev. I don't know about the zev but this magwell has a cutout that the pin fits into so it does not interfere with he magazine extension. Any idea if that magwell will work with Vickers base pads? I'll look when I get home. I'll take a picture with a stock glock mag in it so the clearance can be seen. I don't have a Vickers base but will put a picture up anyways. My inclination would be they won't work with the SCA magwell ether. |
|
Originally Posted By Trooper0007:
That's a good looking well! If I didn't already have a zev, I'd give that one a shot! Originally Posted By Trooper0007:
Originally Posted By great308:
Yes those are taran +6 extensions and they do have the pin in the back that keeps them from coming off the magazine body. The magwell is made by steel city arsenal and decided it over a zev cause it was somewhat the same style design, well made, comes in 3 colors, and only $70 shipped vs almost $100 for zev. I don't know about the zev but this magwell has a cutout that the pin fits into so it does not interfere with he magazine extension. That's a good looking well! If I didn't already have a zev, I'd give that one a shot! Yeah I thought so too, it's darn comfortable and well made for sure. +1 for steel city arsenal. |
|
Originally Posted By DAVE_M:
They do not. https://c1.staticflickr.com/1/737/32048837066_37bc22a4dd_c.jpg Too bad, thanks! |
|
My g19 mos I got off the EE
I just added RMR Kind wish I noticed the trigger guard was rounded. I LOVE how stock trigger guards look. Oh well I guess I'm stuck with it 
May have to add a Magwell since it had one and looks like something is missing. Gun has a weird guide rod that is spiraled and looks like stainless with rust  . May put an original in it
Other than that like it Attached File |
have gun will travel
Well you seen much combat? ......... I've seen a little on TV.
We are jolly green giants, walking the Earth with guns.
Lifetime NRA member
Well you seen much combat? ......... I've seen a little on TV.
We are jolly green giants, walking the Earth with guns.
Lifetime NRA member
|
Originally Posted By dade_shooter:
http://i.imgur.com/6rSBSBo.jpg http://i.imgur.com/DFquyFH.jpg Working on the frame while I wait on the slide to come in. I like that. What tip did you use on the iron? |
|
Originally Posted By DAVE_M:
https://c2.staticflickr.com/4/3743/32065407814_d259e1e48a_c.jpg What magwell on the top right glock? |
|
Originally Posted By dwcopple:
Clean^ Did Talon make those for you or did you cut and piece it? Picture thread 
|
|
Originally Posted By dump1567:
Had fun doing it, but not sure I like it. Probably won't do another. The mag extension started life as a Pearce +2.  Also, it looks like you burned your holes a little too deep and didn't use a random pattern. |
cola-warrior.com
#teamemily
Faxon 10.3 pencil barrel group buy - http://www.ar15.com/forums/t_7_121/1597627_Faxon-10-3-Pencil-Barrels.html
#teamemily
Faxon 10.3 pencil barrel group buy - http://www.ar15.com/forums/t_7_121/1597627_Faxon-10-3-Pencil-Barrels.html
|
Originally Posted By dade_shooter:
FDE Glock 26 I finished up last weekend. http://i.imgur.com/OrWI27m.jpg http://i.imgur.com/pSFenhn.jpg http://i.imgur.com/i7JhlAJ.jpg |
|
Originally Posted By pep9:
Wanna smooth out the finger groove , front area , all gen3 models. Do you guys demel or melt/heat the area down. I don't wanna thin out the area & compromise the frame so I wanted to ask the hive. Thanks , Pep I also did a heat-gun grip reduction on the back strap (Gen 3 19). Having done both sand/grind and heat I would say any time there is enough material to go the sanding route. Much better control over the process. Heat gun made me nervous -- didn't mess anything up, but just didn't like that process. Pics to come soon. |
|
Originally Posted By hvydg:
This is my first attempt at stippling. Just done this 19 yesterday. http://i1117.photobucket.com/albums/k584/hvydg/9B9A04C1-E5DB-4F80-969E-D8638EA91452_zpsvc3j3ji4.jpghttp://i1117.photobucket.com/albums/k584/hvydg/054B3C50-099E-429E-AD24-2ABFB74ED2A7_zpstbseguya.jpg I like the basket-weave look best of all when it comes to stippling. I may get up the nerve to try in on one of my Glock 19s at some point. |
|
Attached File Well, there's no turning back now.
|
"Extremism in defense of liberty is no vice. Moderation in pursuit of justice is no virtue."~Barry Goldwater.
|
Originally Posted By Couch-Commando:
https://www.AR15.Com/media/mediaFiles/74831/20170402-215113-179795.JPGWell, there's no turning back now. I shot a prepped for stipple 17 for a couple of months and a 22 grit finish is like shark skin when it's wet. Better than any stipple, but it's kinds slick when it's dry. |
|
Attached File For a first attempt, I think it turned out pretty well. 
|
"Extremism in defense of liberty is no vice. Moderation in pursuit of justice is no virtue."~Barry Goldwater.
|
Originally Posted By Couch-Commando:
https://www.AR15.Com/media/mediaFiles/74831/20170403-110522-179959.JPGFor a first attempt, I think it turned out pretty well. |
|
Originally Posted By strangejames:
http://i.imgur.com/yWoZDun.jpg wow, Agency. They actually patented the accelerator cuts |
cola-warrior.com
#teamemily
#teamemily