User Panel
Posted: 5/14/2023 3:07:42 PM EDT
|
|
Do I just start ripping stuff out? I don't know which piece is the restrictor
|
|
|
Most times the parts are just a press in fit. You will know what the restrictor looks like when you see it.
|
|
|
|
Fwiw, you might find it better to drill a few small holes. I used too large a bit and now my guest shower is Niagara falls.
|
|
|
|
I have had to bore them out with a big drill bit each one seems to be different.
That plastic restrictor plate in the pipe end. |
|
|
View Quote Serious question. How much tape did you have to use to get a seal without the inlet seal? I never got mine to fully seal. I ran out of MPT. @JustinU235 |
|
|
|
Plastic disc with a small hole on the inlet side of the shower head, Drill it out or carve out a bigger hole with a pointy knife. Don't destroy it!
|
|
Remove the rubber washer and save that. Grab the plastic x and remove that. Then take a new picture
|
|
|
The black rubber seal/washer will just pull out. Then one or two plastic pieces will fall out. They're the restrictor - a birdcage-looking piece. You can replace the black rubber piece, or not.
Enjoy your new high-flow shower head, free of government meddling. |
|
The restrictors used to be simple to remove. Now, many are built into the shower head and are difficult to remove without ruining it.
I'd try drilling that first. |
|
Quoted: The restrictors used to be simple to remove. Now, many are built into the shower head and are difficult to remove without ruining it. I'd try drilling that first. View Quote The ones I’ve bought from Amazon has the number 1 feature listed. “Easy to remove restrictor” It has instructions on how to remove, it just falls out. Like it’s meant to be removed. Because it is. |
|
The last one we bought I had to drill. The nanny parts were too integrated to pull out.
|
|
That center part might be threaded, if it is you can just unscrew it and find the restrictor as you call it.
|
|
|
|
Is the restrictor in the actual showerhead or in the part coming out of the wall?
|
|
|
I would not recommend it.
You will get California cancer once you break da seal. |
|
Quoted: Appears to be the bolt face shaped piece View Quote Yes, first you remove the tamper proof part which is a stainless external-tooth lock washer basically. The starting thread of a long drywall screw works good to grab into that and you pull it out. Then remove the actual flow restrictor with needle nose pliers. |
|
|
View Quote The restrictor in this picture is the Little black O ring |
|
|
|
A word of warning. Drilling it out can allow pieces of plastic to fall IN the shower head, clogging the tiny spray holes.
I found that out the hard way. |
|
Quoted: That's impossible, you rip out all the head restriction, then add a $9 flow adjuster. https://images-na.ssl-images-amazon.com/images/I/61laTZizZmL._AC_SL1000_.jpg I can make all of my showerheads vary between a tiny mist, and paint stripping mode. View Quote Ordered one of these. |
|
I just replaced my shower head this weekend. Saw that restrictor and just left it in. Works wonderfully. Why remove it?
|
|
|
Quoted: Maybe you like shower head with the strength of a gentle spring rain. I want something that feels like it's a notch below a pressure washer. View Quote Attached File |
|
You should probably ask your husband to do it for you. On second thought, if you have to ask, just don’t do it
|
|
|
Quoted: That's impossible, you rip out all the head restriction, then add a $9 flow adjuster. https://images-na.ssl-images-amazon.com/images/I/61laTZizZmL._AC_SL1000_.jpg I can make all of my showerheads vary between a tiny mist, and paint stripping mode. View Quote View All Quotes View All Quotes Quoted: Quoted: Quoted: Fwiw, you might find it better to drill a few small holes. I used too large a bit and now my guest shower is Niagara falls. Yeah, I ripped one out and ruined the head, the pressure was too much. https://images-na.ssl-images-amazon.com/images/I/61laTZizZmL._AC_SL1000_.jpg I can make all of my showerheads vary between a tiny mist, and paint stripping mode. |
|
|
Hide your dog when Joe's restrictor police show up at your door.
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.