Choosing new e cigs. need help (Page 118 of 121)
|
Originally Posted By Eukatae:
Are there any smaller ego batteries with an auto switch like the shitty cigarette models? I farm and I hate having to have a hand free to push the button while I am working. I use one of these when I'm in the car or going out to dinner. I'd imagine, you would probably need to carry a bottle of juice with you if you were wanting to use it as an all day vape. http://www.joyetech.com/product/eRoll.php |
|
Cool thanks |
I survived the cock storm of 11/21/2012.
Bacon grease, the Muslim approved .mil lubricant.
Bacon grease, the Muslim approved .mil lubricant.
 
|
|
Originally Posted By Keith1980: Try a Kayfun Lite Plus clone first. I got one on Ebay for ~$36. The Tobeco one has the best reviews. This way you will know if you like it without spending $100 or more. ETA: Thats the recommendation for the Russian….that Parva is a carto tank…i have never used cartos Originally Posted By Keith1980: Originally Posted By 50-Caliber: Originally Posted By Keith1980: Originally Posted By Atomic_Ferret Trying really, really hard not to turn this into a hobby as I already have too many to finance. Still cheaper than a pack and a half a day.  But, I am very glad to say that today is 40 days "clean" from analogs and I feel great. Going right out of the gate with the ProVari was the smartest thing I've done but now I am turning into a "tank whore". I can't stop looking at them, buying them and now I'm seriously thinking of going to rebuildables.. along with kind of wanting a Parva Clean tank..  Good grief. Even as I type this, I have a Paul Busardo vid on youtube running as he reviews "The Russian".Also, if anyone is looking for additional tools to help stay focused on the benefits of vape.. and you use a iPhone, look for an app called VapeMate. Lets you track total investment in vape, along with your analog free start date and a counter of total time "smoke free" as well as showing total saved by way of cost of a pack x number of packs a week x total time. This gets you a "saved" number that starts in the "red" but eventually goes into the "black" as the lower cost of vape vs analogs is calculated. Anyway, love'n the vape; love'n the no cigarettes; will be happy as a clam if I can get my parts/mods/gizmos spending under control.  Merry Christmas all!!  Try a Kayfun Lite Plus clone first. I got one on Ebay for ~$36. The Tobeco one has the best reviews. This way you will know if you like it without spending $100 or more. ETA: Thats the recommendation for the Russian….that Parva is a carto tank…i have never used cartos So today, bought my first rebuildable wick. MAN! Is this sucker good... Watch Phil Busardo vid on youtube.. yeah, I said "Paul".. my bad.. his name is Phil but I digress. Bought a SmokTech RSST genesis tank (with an ebay bid on a AGA-T2 and a Steam Turbine - see above about my tank "whore-ish-ness"  ) ... and, don't let them fool ya.. it took me all of 8 mins to build a wick (500 mesh SS) and wrap a coil (4 raps of 32 agw got me 2.0 Ohms - perfect) and I'm off to the races. Hahahahha! Why oh why didn't I find this sooner?! I could have been analog free years ago but better late than never right?Anyway, 54 days free and going. Happy New Year!!
|
"Firearms are second only to the Constitution in importance; they are the peoples' liberty's teeth."
-- George Washington
-- George Washington
|
The other week I picked up an Itaste SVD and I love it.
Stepped up from blu > joytech ego c > Itaste. My question, I was wondering what would be the recommended voltage settings? I think the unit goes up to 18v. I'm using liquid from vapod god. DK Tobacco 20% VG 24mg Arctic Wolf 20% VG 24mg |
|
Originally Posted By Thorazine:
The other week I picked up an Itaste SVD and I love it. Stepped up from blu > joytech ego c > Itaste. My question, I was wondering what would be the recommended voltage settings? I think the unit goes up to 18v. I'm using liquid from vapod god. DK Tobacco 20% VG 24mg Arctic Wolf 20% VG 24mg The voltage your going to run depends upon the resistance of the head on your tank, which is rated in ohms. The lower the resistance the lower the voltage. Most of us really just start at the lowest setting take a puff, if it's weak you turn the voltage up until you get a good hit. We now have our own forum The Vapers Den here on ar15.com. So check it out the information should start to be easier to find as we get threads going in there. |
|
Originally Posted By Alembic:
Day 3 and one of my Vision Spinners goes down. I pried the battery post up and seems to be working again. "Three is one" is how I'm going to have to roll with these. ETA: I'm seriously looking at getting one of these, eventually: Touchwood Mod only put your devices on finger tight. once you feel tension stop. that prevents you from pushing the center pin down causing the problem you had. |
|
Originally Posted By WILSON:
Several times. It's (more or less) yours for the asking, but most regulars here prefer to keep everything in one thread. Personally, I'm suffering a bout of ambivalence over the debate because I understand both sides of the argument. Originally Posted By WILSON:
Originally Posted By johnny_dot_exe:
Has anyone started a thread/poll in the site suggestion section to push for a new e-cig section? If not someone should. We could really use a section for this stuff because having it all in one thread is extremely confusing for new vapers. Several times. It's (more or less) yours for the asking, but most regulars here prefer to keep everything in one thread. Personally, I'm suffering a bout of ambivalence over the debate because I understand both sides of the argument. Wilson, I already said I'd babysit an e-cig forum. I have the time on my hands, even though this bunch tends to be be pretty self policing... And here's my bucket of mods. Should be getting another #20 and maybe something new to review from Sigelei. The finish on the Sigelei 20 is from heating the stainless to orange hot and then quenching it in cold water... 
|
Yeah, anyone who drinks clam squeezing tainted tomato juice mixed with beer is automatically disqualified from pronouncing ANY beverage unpalatable.
|
Originally Posted By Keith1980:
Try using cotton. It expands and fills the gap where the wick is better than silica. I'm not saying to rebuild the coil if you don't feel comfortable, just a wick replacement. Take the top "chimney" off and then remove all the wicks and take a small bit of cotton off of a cotton ball, going with the grain so to speak. Twist it up in between your fingers and then thread it into the existing coil. It should slide in VERY easily. Don't worry about that, like I said before it will expand. Then put the chimney back on and trim the cotton. Once assembled place upright for ~5 min. Then take a couple quick, sharp pulls without pressing the fire button. After this you should be good to go. Originally Posted By Keith1980:
Originally Posted By DixieAlpha929:
I am having major issues with one of my Protank 2s. They are the tanks I got over a month ago with my starter kit and one has always done better than the other. The one that has been giving me trouble has been flooding and it has only gotten worse recently. The other day I filled it with Thug Juice and it started popping, gurgling and I end up with a mouth full of juice. I tried 2 new coils, one that came with the tank and another from a pack of replacement coils and it didn't fix the issue. I checked the base for cracks and made sure the O ring was still in good condition. I even tried the Thug Juice in my other tank to make sure it wasn't a issue with the juice. The only issue with the tank that I can notice is that the threads on the on the base and where it screws into the tank are stripped a bit at the beginning, I just have to be careful not to let it cross thread when I start to screw it in, but after that it goes in fine. I can't see how that would be causing the flooding because everything still fits together snugly, but it may point to the fact that I got a poorly built tank. I emailed MFS about the issue 2 days ago but they haven't responded yet. Any clue what is going on with my tank or any easy fixes I should try? Try using cotton. It expands and fills the gap where the wick is better than silica. I'm not saying to rebuild the coil if you don't feel comfortable, just a wick replacement. Take the top "chimney" off and then remove all the wicks and take a small bit of cotton off of a cotton ball, going with the grain so to speak. Twist it up in between your fingers and then thread it into the existing coil. It should slide in VERY easily. Don't worry about that, like I said before it will expand. Then put the chimney back on and trim the cotton. Once assembled place upright for ~5 min. Then take a couple quick, sharp pulls without pressing the fire button. After this you should be good to go. I just did the cotton wick replacement with all the wicks and it is working pretty good so far, thanks for the tip. I disassembled a couple of the replacement heads and noticed it looked like the wicks from Kanger didn't always seal up the hole between the coil and tank very well. It took me two tries with the cotton, the first time I used too much and the draw was very tight. From now on when I get a replacement head that isn't up to par or getting worn out it will be getting reworked with cotton. |
|
Originally Posted By DixieAlpha929:
I just did the cotton wick replacement with all the wicks and it is working pretty good so far, thanks for the tip. I disassembled a couple of the replacement heads and noticed it looked like the wicks from Kanger didn't always seal up the hole between the coil and tank very well. It took me two tries with the cotton, the first time I used too much and the draw was very tight. From now on when I get a replacement head that isn't up to par or getting worn out it will be getting reworked with cotton. Originally Posted By DixieAlpha929:
Originally Posted By Keith1980:
Originally Posted By DixieAlpha929:
I am having major issues with one of my Protank 2s. They are the tanks I got over a month ago with my starter kit and one has always done better than the other. The one that has been giving me trouble has been flooding and it has only gotten worse recently. The other day I filled it with Thug Juice and it started popping, gurgling and I end up with a mouth full of juice. I tried 2 new coils, one that came with the tank and another from a pack of replacement coils and it didn't fix the issue. I checked the base for cracks and made sure the O ring was still in good condition. I even tried the Thug Juice in my other tank to make sure it wasn't a issue with the juice. The only issue with the tank that I can notice is that the threads on the on the base and where it screws into the tank are stripped a bit at the beginning, I just have to be careful not to let it cross thread when I start to screw it in, but after that it goes in fine. I can't see how that would be causing the flooding because everything still fits together snugly, but it may point to the fact that I got a poorly built tank. I emailed MFS about the issue 2 days ago but they haven't responded yet. Any clue what is going on with my tank or any easy fixes I should try? Try using cotton. It expands and fills the gap where the wick is better than silica. I'm not saying to rebuild the coil if you don't feel comfortable, just a wick replacement. Take the top "chimney" off and then remove all the wicks and take a small bit of cotton off of a cotton ball, going with the grain so to speak. Twist it up in between your fingers and then thread it into the existing coil. It should slide in VERY easily. Don't worry about that, like I said before it will expand. Then put the chimney back on and trim the cotton. Once assembled place upright for ~5 min. Then take a couple quick, sharp pulls without pressing the fire button. After this you should be good to go. I just did the cotton wick replacement with all the wicks and it is working pretty good so far, thanks for the tip. I disassembled a couple of the replacement heads and noticed it looked like the wicks from Kanger didn't always seal up the hole between the coil and tank very well. It took me two tries with the cotton, the first time I used too much and the draw was very tight. From now on when I get a replacement head that isn't up to par or getting worn out it will be getting reworked with cotton. Now that you've cracked the nut, you are only one step away from making your own rebuilds that will work 3x better than stock. Microcoils are VERY easy to build. |
|
Originally Posted By sywagon:
Now that you've cracked the nut, you are only one step away from making your own rebuilds that will work 3x better than stock. Microcoils are VERY easy to build. Originally Posted By sywagon:
Originally Posted By DixieAlpha929:
Originally Posted By Keith1980:
Originally Posted By DixieAlpha929:
I am having major issues with one of my Protank 2s. They are the tanks I got over a month ago with my starter kit and one has always done better than the other. The one that has been giving me trouble has been flooding and it has only gotten worse recently. The other day I filled it with Thug Juice and it started popping, gurgling and I end up with a mouth full of juice. I tried 2 new coils, one that came with the tank and another from a pack of replacement coils and it didn't fix the issue. I checked the base for cracks and made sure the O ring was still in good condition. I even tried the Thug Juice in my other tank to make sure it wasn't a issue with the juice. The only issue with the tank that I can notice is that the threads on the on the base and where it screws into the tank are stripped a bit at the beginning, I just have to be careful not to let it cross thread when I start to screw it in, but after that it goes in fine. I can't see how that would be causing the flooding because everything still fits together snugly, but it may point to the fact that I got a poorly built tank. I emailed MFS about the issue 2 days ago but they haven't responded yet. Any clue what is going on with my tank or any easy fixes I should try? Try using cotton. It expands and fills the gap where the wick is better than silica. I'm not saying to rebuild the coil if you don't feel comfortable, just a wick replacement. Take the top "chimney" off and then remove all the wicks and take a small bit of cotton off of a cotton ball, going with the grain so to speak. Twist it up in between your fingers and then thread it into the existing coil. It should slide in VERY easily. Don't worry about that, like I said before it will expand. Then put the chimney back on and trim the cotton. Once assembled place upright for ~5 min. Then take a couple quick, sharp pulls without pressing the fire button. After this you should be good to go. I just did the cotton wick replacement with all the wicks and it is working pretty good so far, thanks for the tip. I disassembled a couple of the replacement heads and noticed it looked like the wicks from Kanger didn't always seal up the hole between the coil and tank very well. It took me two tries with the cotton, the first time I used too much and the draw was very tight. From now on when I get a replacement head that isn't up to par or getting worn out it will be getting reworked with cotton. Now that you've cracked the nut, you are only one step away from making your own rebuilds that will work 3x better than stock. Microcoils are VERY easy to build. I know, in the past two months I have spent on electronic cigarettes what I would have spent on cigarettes in four months, so I am trying to hold off on buying any new gizmos for a while. Rebuilding the Protank coils shouldn't be too costly. I assume all I will need is some wire, cotton balls, and an ohm meter, correct? |
|
Originally Posted By DixieAlpha929:
I know, in the past two months I have spent on electronic cigarettes what I would have spent on cigarettes in four months, so I am trying to hold off on buying any new gizmos for a while. Rebuilding the Protank coils shouldn't be too costly. I assume all I will need is some wire, cotton balls, and an ohm meter, correct? Originally Posted By DixieAlpha929:
Originally Posted By sywagon:
Originally Posted By DixieAlpha929:
Originally Posted By Keith1980:
Originally Posted By DixieAlpha929:
I am having major issues with one of my Protank 2s. They are the tanks I got over a month ago with my starter kit and one has always done better than the other. The one that has been giving me trouble has been flooding and it has only gotten worse recently. The other day I filled it with Thug Juice and it started popping, gurgling and I end up with a mouth full of juice. I tried 2 new coils, one that came with the tank and another from a pack of replacement coils and it didn't fix the issue. I checked the base for cracks and made sure the O ring was still in good condition. I even tried the Thug Juice in my other tank to make sure it wasn't a issue with the juice. The only issue with the tank that I can notice is that the threads on the on the base and where it screws into the tank are stripped a bit at the beginning, I just have to be careful not to let it cross thread when I start to screw it in, but after that it goes in fine. I can't see how that would be causing the flooding because everything still fits together snugly, but it may point to the fact that I got a poorly built tank. I emailed MFS about the issue 2 days ago but they haven't responded yet. Any clue what is going on with my tank or any easy fixes I should try? Try using cotton. It expands and fills the gap where the wick is better than silica. I'm not saying to rebuild the coil if you don't feel comfortable, just a wick replacement. Take the top "chimney" off and then remove all the wicks and take a small bit of cotton off of a cotton ball, going with the grain so to speak. Twist it up in between your fingers and then thread it into the existing coil. It should slide in VERY easily. Don't worry about that, like I said before it will expand. Then put the chimney back on and trim the cotton. Once assembled place upright for ~5 min. Then take a couple quick, sharp pulls without pressing the fire button. After this you should be good to go. I just did the cotton wick replacement with all the wicks and it is working pretty good so far, thanks for the tip. I disassembled a couple of the replacement heads and noticed it looked like the wicks from Kanger didn't always seal up the hole between the coil and tank very well. It took me two tries with the cotton, the first time I used too much and the draw was very tight. From now on when I get a replacement head that isn't up to par or getting worn out it will be getting reworked with cotton. Now that you've cracked the nut, you are only one step away from making your own rebuilds that will work 3x better than stock. Microcoils are VERY easy to build. I know, in the past two months I have spent on electronic cigarettes what I would have spent on cigarettes in four months, so I am trying to hold off on buying any new gizmos for a while. Rebuilding the Protank coils shouldn't be too costly. I assume all I will need is some wire, cotton balls, and an ohm meter, correct? Yeah, 30 ga kanthal a1 - you can get 25' for ~$5 shipped off of ebay. |
| I am on my 3rd try with the cotton wick replacement on my Protank 2 coils. I finally got it where I like it with my thicker fluids, but the thinner fluids, mostly from MBV, are still wanting to flood to easily. It is a fine balance of not using so much that it messes up the draw and enough to keep the fluid from leaking into the coil. I got some more supplies on the way, next time I make an order I will get an ohm meter and kanthal wire so I can take a swing at building micro coils. |
|
New to Vaping, hi all.
I picked up a Smoov rev 650 with a 510 thread, an Evod tank, and have been messing around with tons of different juices. If I keep the mg high, 24 or so, I have no cravings for cigarettes. I think i've had 3 or 4 in the last few days, but thats the point, isn't it? The smell and taste of a regular smoke is now disgusting  
I placed an order with Wyoming Vapor for some backup supplies, the owner is a member here if I'm not mistaken, right? |
Molon Labe
|
Originally Posted By NIUGoalie:
New to Vaping, hi all.
I picked up a Smoov rev 650 with a 510 thread, an Evod tank, and have been messing around with tons of different juices. If I keep the mg high, 24 or so, I have no cravings for cigarettes. I think i've had 3 or 4 in the last few days, but thats the point, isn't it? The smell and taste of a regular smoke is now disgusting
I placed an order with Wyoming Vapor for some backup supplies, the owner is a member here if I'm not mistaken, right? Originally Posted By NIUGoalie:
New to Vaping, hi all.
I picked up a Smoov rev 650 with a 510 thread, an Evod tank, and have been messing around with tons of different juices. If I keep the mg high, 24 or so, I have no cravings for cigarettes. I think i've had 3 or 4 in the last few days, but thats the point, isn't it? The smell and taste of a regular smoke is now disgusting
I placed an order with Wyoming Vapor for some backup supplies, the owner is a member here if I'm not mistaken, right? From the sales and vendor discount thread courtesy of NY_Shooter http://www.wyomingvapor.com/ ---- Coupon code arfcom for 15% off. Owned/Operated by fellow Arfcommer 'xdoctor'. Congrats on moving away from cigarettes. I am well over a month without a cigarette and last time I smoked one it was disappointing. Now people around me who smoke are turning to e cigs and having the same reaction. |
|
Originally Posted By DixieAlpha929:
I am on my 3rd try with the cotton wick replacement on my Protank 2 coils. I finally got it where I like it with my thicker fluids, but the thinner fluids, mostly from MBV, are still wanting to flood to easily. It is a fine balance of not using so much that it messes up the draw and enough to keep the fluid from leaking into the coil. I got some more supplies on the way, next time I make an order I will get an ohm meter and kanthal wire so I can take a swing at building micro coils. I'm currently using a pretty thin juice from MBV (80/20 Kiwi Strawberry that I got as a free sample with my last order), and I put another small piece of cotton on top of the microcoil. No flooding so far. Factory ProTank heads come with the same sort of extra wick laying on top of the coil, so if you know you're going to be using a thinner juice, I would throw one on there to help prevent flooding. |
|
Originally Posted By NY_Shooter: Finally got off my ass and rebuilt a ProTank head with a microcoil and cotton. I think it was about a 9 or 10 wrap coil that came out to 1.9ohms. Works fan-fucking-tastic, and much better than factory heads. Ugh, now I'm stuck... Because I really have been enjoying this iClear 30S And of course, it's not rebuildable. Oh well, I got what I wanted. Damn thing works better than a Vivi in the flavor department, and doesn't give me any problems. Tough to complain about that.  |
In a nation run by swine, all pigs are upward-mobile and the rest of us are fucked until we can put our acts together: Not necessarily to Win, but mainly to keep from Losing Completely. -HST
|
Originally Posted By sywagon: And we're off: http://www.ar15.com/forums/t_1_5/1578652_A_Vaping_forum_.html&page=1 Nobody sent me a memo. I had to find out from someone bitching about it in GD |
In a nation run by swine, all pigs are upward-mobile and the rest of us are fucked until we can put our acts together: Not necessarily to Win, but mainly to keep from Losing Completely. -HST
|
Originally Posted By gonzo_beyondo:
Nobody sent me a memo. I had to find out from someone bitching about it in GD
Originally Posted By gonzo_beyondo:
Originally Posted By sywagon:
And we're off: http://www.ar15.com/forums/t_1_5/1578652_A_Vaping_forum_.html&page=1 Nobody sent me a memo. I had to find out from someone bitching about it in GD
well, get in there! |
2012 Arfcockalypse Survivor...callsign Hooligan
Joined:
Feb 2011
Posts:
1954
EE: 100% (14)
FL, USA
|
Originally Posted By gonzo_beyondo:
Nobody sent me a memo. I had to find out from someone bitching about it in GD
Originally Posted By gonzo_beyondo:
Originally Posted By sywagon:
And we're off: http://www.ar15.com/forums/t_1_5/1578652_A_Vaping_forum_.html&page=1 Nobody sent me a memo. I had to find out from someone bitching about it in GD
I'm not even gonna waste my time in there. |
Due to the rising cost of ammunition, I will no longer be able to provide a warning shot. Thank you for understanding.
|
Originally Posted By sywagon:
And we're off: http://www.ar15.com/forums/t_1_5/1578652_A_Vaping_forum_.html&page=1 
We have an entire section dedicated to a fictional monster, another dedicated to grooming, and this subforum is what causes butthurt? |
2012 Arfcockalypse Survivor...callsign Hooligan
Joined:
Feb 2011
Posts:
1958
EE: 100% (14)
FL, USA
|
Originally Posted By NY_Shooter:
We have an entire section dedicated to a fictional monster, another dedicated to grooming, and this subforum is what causes butthurt? Originally Posted By NY_Shooter:
Originally Posted By sywagon:
And we're off: http://www.ar15.com/forums/t_1_5/1578652_A_Vaping_forum_.html&page=1
We have an entire section dedicated to a fictional monster, another dedicated to grooming, and this subforum is what causes butthurt? Someone did make a good point. The people that are all butthurt because of a few people vaping around them sound like the liberal fuck wads that want to ban firearms because of the stupid actions of a few. |
Due to the rising cost of ammunition, I will no longer be able to provide a warning shot. Thank you for understanding.
2012 Arfcockalypse Survivor...callsign Hooligan
Joined:
Feb 2011
Posts:
1984
EE: 100% (14)
FL, USA
|
Originally Posted By NY_Shooter:
I'm guess there's magnets and devil worshiping involved: http://i.minus.com/itv2hJmNQaKKI.gif Great…now I'm gonna be trying that for the rest of the day. |
Due to the rising cost of ammunition, I will no longer be able to provide a warning shot. Thank you for understanding.
|
Originally Posted By DixieAlpha929:
I am on my 3rd try with the cotton wick replacement on my Protank 2 coils. I finally got it where I like it with my thicker fluids, but the thinner fluids, mostly from MBV, are still wanting to flood to easily. It is a fine balance of not using so much that it messes up the draw and enough to keep the fluid from leaking into the coil. I got some more supplies on the way, next time I make an order I will get an ohm meter and kanthal wire so I can take a swing at building micro coils. On the chimney part with that doughnut grommet turn it upside down. Fixed my pt2 hate a bit. |
|
Originally Posted By Keith1980:
Great…now I'm gonna be trying that for the rest of the day. Originally Posted By Keith1980:
Originally Posted By NY_Shooter:
I'm guess there's magnets and devil worshiping involved: http://i.minus.com/itv2hJmNQaKKI.gif Great…now I'm gonna be trying that for the rest of the day. Should be a good show with your damn cloud machine!
|
|
Originally Posted By NY_Shooter: I'm guess there's magnets and devil worshiping involved: http://i.minus.com/itv2hJmNQaKKI.gif  |
______________________________________ Time is the fire in which we burn. ______________________________________
|
Originally Posted By WILSON:
Originally Posted By NY_Shooter:
I'm guess there's magnets and devil worshiping involved: http://i.minus.com/itv2hJmNQaKKI.gif http://i.imgur.com/8xhp4ip.png Looks delicious!
|
|
Originally Posted By Keith1980: Great…now I'm gonna be trying that for the rest of the day. Originally Posted By Keith1980: Originally Posted By NY_Shooter: I'm guess there's magnets and devil worshiping involved: http://i.minus.com/itv2hJmNQaKKI.gif Great…now I'm gonna be trying that for the rest of the day. |
I will outlive every democrat voter I know so I can piss on their grave.
2012 Arfcockalypse Survivor...callsign Hooligan
Joined:
Feb 2011
Posts:
1986
EE: 100% (14)
FL, USA
|
Originally Posted By WILSON:
Originally Posted By NY_Shooter:
I'm guess there's magnets and devil worshiping involved: http://i.minus.com/itv2hJmNQaKKI.gif http://i.imgur.com/8xhp4ip.png Cheers!! 
|
Due to the rising cost of ammunition, I will no longer be able to provide a warning shot. Thank you for understanding.
|
Originally Posted By grondike:
Are any other Team members not seeing a green triangle next to this thread in the main list since it was moved from GD? It's hard trying to keep up when there's no way to tell which post I read previously. I'm not seeing it either. Must be a glitch in the matrix due to the move or something. |
|
I'd kinda like a drip tip for trying out new samplers of juice, instead of having to deal with filling a tank and all that stuff. Kanger Evods are great for all day use, but not for sitting in front of the computer.
Any Suggestions? Also, would I have to get a different battery other than the 510 threaded ones I have now? |
Molon Labe
|
Originally Posted By NIUGoalie:
I'd kinda like a drip tip for trying out new samplers of juice, instead of having to deal with filling a tank and all that stuff. Kanger Evods are great for all day use, but not for sitting in front of the computer. Any Suggestions? Also, would I have to get a different battery other than the 510 threaded ones I have now? 510 is pretty standard now adays. I do miss my 901s and 801s at times. OK for dripping if you are trying them get a bridgeless 510. or a 306. For all day use battery power bang for the buck get an MVP2 from innokin there are a few places that carry them sub 45. 101vape has them sub 40 and vapordna is like 42 and they are skinned I think. For all day enjoyment tanks, kayfun clone recommend hicigar you can get em at luxorvape for about 45, or check out artimus's ebay store and pick up a black edition for 50 bucks. |
|
Originally Posted By NIUGoalie:
I'd kinda like a drip tip for trying out new samplers of juice, instead of having to deal with filling a tank and all that stuff. Kanger Evods are great for all day use, but not for sitting in front of the computer. Any Suggestions? Also, would I have to get a different battery other than the 510 threaded ones I have now? These give great hits and are super cheap. Cons are you only get one ceramic cup to rebuild and you have to use no resistance wire leads. http://gotsmok.com/ebaron-dripper-pro-clone-6-71/ It is a clone of the Ebarron dripper that I have. The best option if you have the $ for that purpose is the Sophia because it can be used as a dripper or in a tank and will give similar hits. I just got one but haven't set it up. It you don't want to deal with the cups, the IGO drippers work great and are cheap. |
2012 Arfcockalypse Survivor...callsign Hooligan
Joined:
Feb 2011
Posts:
2590
EE: 100% (14)
FL, USA
|
Originally Posted By Keith1980:
This is what I picked up. It's been 1 week without a cigarette now. As I said earlier it's a Vapor Shark. Being as I'm new to this I don't know all that much about it. It looks like a Vivi Nova tank. It's a 900mah battery with a fixed voltage of 3.7. You guys know much about these? I get a nice throat hit which is a big deal to me. The one thing I noticed is when I take the mouthpiece off there is a little fluid underneath. This makes me worried that it will leak in my pocket if I sit down. Is this normal? Anyway, I am happy with it so far. Another plus is they have a store right down the street from me so I don't have to wait for shipping. <a href="http://s15.photobucket.com/user/dragtillidie/media/20130422_215757_zpse2cb5cc2.jpg.html" target="_blank">http://i15.photobucket.com/albums/a378/dragtillidie/20130422_215757_zpse2cb5cc2.jpg</a> Found my first pic..lol. Wow I've come a long way!! I think this was my 3rd or 4th post in this thread. |
Due to the rising cost of ammunition, I will no longer be able to provide a warning shot. Thank you for understanding.
|
Originally Posted By Keith1980:
Found my first pic..lol. Wow I've come a long way!! I think this was my 3rd or 4th post in this thread. Originally Posted By Keith1980:
Originally Posted By Keith1980:
This is what I picked up. It's been 1 week without a cigarette now. As I said earlier it's a Vapor Shark. Being as I'm new to this I don't know all that much about it. It looks like a Vivi Nova tank. It's a 900mah battery with a fixed voltage of 3.7. You guys know much about these? I get a nice throat hit which is a big deal to me. The one thing I noticed is when I take the mouthpiece off there is a little fluid underneath. This makes me worried that it will leak in my pocket if I sit down. Is this normal? Anyway, I am happy with it so far. Another plus is they have a store right down the street from me so I don't have to wait for shipping. <a href="http://s15.photobucket.com/user/dragtillidie/media/20130422_215757_zpse2cb5cc2.jpg.html" target="_blank">http://i15.photobucket.com/albums/a378/dragtillidie/20130422_215757_zpse2cb5cc2.jpg</a> Found my first pic..lol. Wow I've come a long way!! I think this was my 3rd or 4th post in this thread.
I remember when I first found this thread. I had seen a Blu commercial on TV in the wee hours of the morning. I knew enough to search, since I know there is already a thread on anything and everything under the sun in GD. Found this thread, started reading, and was all like "WTF are these people talking about?". It was like being faced with my first set of bra covered titties and the damn snap in the back; I knew I wanted in, but I had no idea what was going on. |
|
My first post; back on page 9:
(I didn't realize I got in on this thread that early. )
Originally Posted By NY_Shooter:
Just saw a commercial on TV for BluCigs, and I knew damn well there would be a thread somewhere here on e-cigs, so here I am. I don't see much talk about this brand in this thread, aside from one guy saying he doesn't like them anymore, since they switched something. I have zero experience with this stuff, but am currently at about 3/4 of a pack a day (Newport 100's). 29yrs old now. Tried my first cig at about 12, started smoking regularly at 16. These things are interesting me. -Are BluCigs truly crap? Or are they just not as good as the others you guys are talking about? -I'll be honest, my main motivation is $$. I'm really only interested in these, to try and save money. Has your guys' experience been that e-cigs are cheaper (aside from the seemingly higher "buy-in" to get started)? -I love the throat burn I get from Newports. Can you really "feel" the drags you take off of these e-cigs? I saw that Walgreens carries the BluCigs in single/disposables, so you can just try them before buying the starter kit. I'm going to try and remember to pick one up today, just to see what I think about e-cigs in general. |
2012 Arfcockalypse Survivor...callsign Hooligan
Joined:
Feb 2011
Posts:
2592
EE: 100% (14)
FL, USA
|
Originally Posted By NY_Shooter:
I remember when I first found this thread. I had seen a Blu commercial on TV in the wee hours of the morning. I knew enough to search, since I know there is already a thread on anything and everything under the sun in GD. Found this thread, started reading, and was all like "WTF are these people talking about?". It was like being faced with my first set of bra covered titties and the damn snap in the back; I knew I wanted in, but I had no idea what was going on. Originally Posted By NY_Shooter:
Originally Posted By Keith1980:
Originally Posted By Keith1980:
This is what I picked up. It's been 1 week without a cigarette now. As I said earlier it's a Vapor Shark. Being as I'm new to this I don't know all that much about it. It looks like a Vivi Nova tank. It's a 900mah battery with a fixed voltage of 3.7. You guys know much about these? I get a nice throat hit which is a big deal to me. The one thing I noticed is when I take the mouthpiece off there is a little fluid underneath. This makes me worried that it will leak in my pocket if I sit down. Is this normal? Anyway, I am happy with it so far. Another plus is they have a store right down the street from me so I don't have to wait for shipping. <a href="http://s15.photobucket.com/user/dragtillidie/media/20130422_215757_zpse2cb5cc2.jpg.html" target="_blank">http://i15.photobucket.com/albums/a378/dragtillidie/20130422_215757_zpse2cb5cc2.jpg</a> Found my first pic..lol. Wow I've come a long way!! I think this was my 3rd or 4th post in this thread.
I remember when I first found this thread. I had seen a Blu commercial on TV in the wee hours of the morning. I knew enough to search, since I know there is already a thread on anything and everything under the sun in GD. Found this thread, started reading, and was all like "WTF are these people talking about?". It was like being faced with my first set of bra covered titties and the damn snap in the back; I knew I wanted in, but I had no idea what was going on.
|
Due to the rising cost of ammunition, I will no longer be able to provide a warning shot. Thank you for understanding.
|
Originally Posted By NY_Shooter: It was like being faced with my first set of bra covered titties and the damn snap in the back; I knew I wanted in, but I had no idea what was going on. That's almost sig-line material. |
I saw a movie once where only the military and LE were allowed to own firearms. It was called Schindler's List.
|
Originally Posted By WILSON: I anti-archived this thread in February; it'll never die. Originally Posted By WILSON: Originally Posted By NY_Shooter: Bump for nostalgia. I anti-archived this thread in February; it'll never die. |
I will outlive every democrat voter I know so I can piss on their grave.