|
Quoted: Garmin smart watches with "night vision mode" is awesome for this. Turns off the flashing heart rate sensor and dims the screen brightness to work under nods. It's a necessity for a smartwatch when you have other people with nods hunting you. And this happens when exactly?? I mean what in the actual fuck do YOU do for a living?! ![]() ![]() |
|
Quoted: And this happens when exactly?? I mean what in the actual fuck do YOU do for a living?! ![]() ![]() Not what I do for a living, but I did OPFOR for the east coast seal teams in their land warfare course for a few years. You definitely don't want any negligent light discharges when they are hunting you. You can see a heartrate monitor on a watch from a long way away using nods. |
|
Quoted: And this happens when exactly?? I mean what in the actual fuck do YOU do for a living?! ![]() ![]() Quoted: Quoted: Garmin smart watches with "night vision mode" is awesome for this. Turns off the flashing heart rate sensor and dims the screen brightness to work under nods. It's a necessity for a smartwatch when you have other people with nods hunting you. And this happens when exactly?? I mean what in the actual fuck do YOU do for a living?! ![]() ![]() Classy. |
|
If non NV users don't know what they are talking about- your phone and other devices emitting, look at this clip we posted a few years ago- Short IG clip showing emitting |
|
Quoted: I mean, you *can* if you have a big enough laser... ![]() Quoted: Quoted: Quoted: (Newbie question) Is a laser held on target seen by both night vision AND thermal or only night vision, or... ? Your not going to see an IR laser with thermal if that's what your asking. I mean, you *can* if you have a big enough laser... ![]()
|
|
Quoted: If non NV users don't know what they are talking about- your phone and other devices emitting, look at this clip we posted a few years ago- Short IG clip showing emitting Hell, it’s a disco in my bedroom when my iPhone is on the charger and the face recognition sensor trips. I had no idea until I was goofing off with my SiOnyx. |
|
Quoted: The idea of using a helmet mounted PVS14 to move around, and then a thermal scope to engage animals is very attractive to me. IMHO, a thermal scanner on a helmet is also a must. Scanning with a scope sucks and using an IR light sometimes isn't the best tool for the job. |
|
Quoted: IMHO, a thermal scanner on a helmet is also a must. Scanning with a scope sucks and using an IR light sometimes isn't the best tool for the job. Quoted: Quoted: The idea of using a helmet mounted PVS14 to move around, and then a thermal scope to engage animals is very attractive to me. IMHO, a thermal scanner on a helmet is also a must. Scanning with a scope sucks and using an IR light sometimes isn't the best tool for the job. I'm headed down this path as well. I have the thermal now. At some point in 2026, I should be able to get a PVS 14. |
|
Sweet! Enjoy it, wear it often, take the dogs out to go to the bathroom, walk around as much as you can! Change batteries with the nods down in front of your face and remember TITs first when inserting said batteries! Get a butler creek scope cap, drill a hole in the front of it, so you can adjust your focus quickly. I run mine close to my eye with no issues. Enjoy looking at all the crap in the night sky! Have fun!!!!! |
|
Quoted: I bought a Crye Nightcap, and upgraded the straps with an H Harness. I think this is vastly more practical than a bump helmet. If I'm going to wear a helmet, I think I want ballistic protection. With the Nightcap, I can keep my PVS in my truck pretty easily, for impromptu gooning. I'm putting together my yearly battery order, and I'm going to deeply stack Energizer Ultimate Lithium AAs. https://i.imgur.com/NG0GQwj.png?2" target="_blank">https://i.imgur.com/NG0GQwj.png?2 I almost never use my nightcap. I like the sturdiness of a bump. Definitely look at getting a dovetail mount and arm. Bayonet has several short comings. And tether the PVS to your shroud. |
|
Quoted: I almost never use my nightcap. I like the sturdiness of a bump. Definitely look at getting a dovetail mount and arm. Bayonet has several short comings. And tether the PVS to your shroud. Quoted: Quoted: I bought a Crye Nightcap, and upgraded the straps with an H Harness. I think this is vastly more practical than a bump helmet. If I'm going to wear a helmet, I think I want ballistic protection. With the Nightcap, I can keep my PVS in my truck pretty easily, for impromptu gooning. I'm putting together my yearly battery order, and I'm going to deeply stack Energizer Ultimate Lithium AAs. https://i.imgur.com/NG0GQwj.png?2" target="_blank">https://i.imgur.com/NG0GQwj.png?2 I almost never use my nightcap. I like the sturdiness of a bump. Definitely look at getting a dovetail mount and arm. Bayonet has several short comings. And tether the PVS to your shroud. Anything wrong with just throwing on a pair of crossed zip ties to keep it tight? |
|
Quoted: The tether is to keep it from hitting the ground if the mount unclips. I had one of those, get the helmet you need. Quoted: Quoted: Anything wrong with just throwing on a pair of crossed zip ties to keep it tight? The tether is to keep it from hitting the ground if the mount unclips. I had one of those, get the helmet you need. Gotcha. I'm extremely happy with the Nightcap for now. It's stowable in a way a helmet never will be. |
|
Quoted: IMHO, a thermal scanner on a helmet is also a must. Scanning with a scope sucks and using an IR light sometimes isn't the best tool for the job. Quoted: Quoted: The idea of using a helmet mounted PVS14 to move around, and then a thermal scope to engage animals is very attractive to me. IMHO, a thermal scanner on a helmet is also a must. Scanning with a scope sucks and using an IR light sometimes isn't the best tool for the job. Attached File |
|
Quoted: I didn't care for helmet mounted thermal at all. I ended up buying binos and just hand holding the thermal. https://www.ar15.com/media/mediaFiles/127430/NV3_jpg-3694377.JPG Yup. Articulating binos and a handheld scanner for me. |
|
Quoted: I use a counterweight and adjust the suspension system to help keep the front of the helmet high. Then you can adjust the tilt and slide on the mount to better work for your eye. This X1000. Use counterweight, a lot. Comfort goes way up, then adjusting is easier. |
|
Quoted: I wish I could try nods. Even just for a second. They seem so cool. Idk if anyone I know actually has them. I had never looked through NODs when I bought my first budget setup. |
|
Quoted: I wish I could try nods. Even just for a second. They seem so cool. Idk if anyone I know actually has them. You could go to your FL HTF and ask who wants to meet up and show you some NODs. Best if it's at a gun range or somewhere you won't come off as too weird or whatever. |
|
Quoted: Yup. Articulating binos and a handheld scanner for me. Quoted: Quoted: I didn't care for helmet mounted thermal at all. I ended up buying binos and just hand holding the thermal. https://www.ar15.com/media/mediaFiles/127430/NV3_jpg-3694377.JPG Yup. Articulating binos and a handheld scanner for me. 100% how I ended up. Started with a PVS14, added a thermal, got duals shortly after. But now I have a loaner device and I use the PVS14 as my travel setup. |
|
Quoted: Bump with a couple of pics from the cola wars in Tennessee last weekend Me shooting pistol, poorly https://i.imgur.com/cMad3hj_d.webp?maxwidth=760&fidelity=grand My rifle also sucked https://i.imgur.com/70XPRz8_d.webp?maxwidth=1520&fidelity=grand Yay stress, shooting & nighttime! Love the Cola Warriors! We've sponsored many events over the years! Awesome events. |






