10 Packs of Inner Tube Bands:
-Perfect for securing loose slings, extra grip on pistol grips, securing loose weapon-light wires/pressure pads, mag markers, etc and of course your clone builds!10 sizes currently available: Please read carefully about each band size
4"- 24 individual bands available
-Good for bundling sling slack and/or tourniquets against fixed stocks and some storage style collapsible stocks (this **may** work with sopmod stocks if you have thick sling, padded slings, etc).
-I like how these fit towards the rear of A1/A2 stocks the best.
-These are fairly large and aren't as tight as I would like unless you stuff them pretty good, but you also don't have to fight them as much to get the sling up under them.
3.125" - 27 individual bands available - SOPMOD SIZE.
good for securing slings to storage stocks (i.e. SOPMOD, ACS, SL-S, etc), this is THE high demand Clone size
2.35" - 73 individual bands available
-good for most rails, mag bands or securing sling slack to some stocks
-similar uses to the 2.2"/2.125", but seems to have a bit more flex (measures 2.125" when laid flat, but is considered a 2.35" inner tube based on marked sizing)
2.2" - 117 individual bands available
-pretty much identical to the 2.125" listed above, good for mag bands and slim rails/handguard (m-lok or keymod etc) good for mag bands, slimmer rails, or securing sling slack on your stocks
2"- 82 individual bands available
-good for securing/bundling sling slack, may work as mag bands* or on very narrow foreends/rails*
1.9" - 91 individual bands available
-good for securing/bundling sling slack (on itself), may work for some thicker VFGs with pressure pads
1.75" 196 individual bands available
-good for securing/bundling sling slack (on itself), my choice for securing excess cable/pressure pads to thick (like BCM) VFGs
1.5" 224 individual bands available
-work well with medium sized VFGs or thick pressure pad combos (should work with medium thickness vfgs like tango downs, DD, etc)
-1.25" 54 individual bands available
-these work well for skinny VFG and pressure pad combos (like KAC broomsticks and old M952 pressure pads as seen in photo). I recommend 2 bands per pressure pad/vfg combo.$5 each for a pack of 10 (all the same size, random assortment, or your choice of a mixed bag)
Add $4.50* for USPS first class shipping, will come with tracking numbers. Shipping will be $4.50* regardless of how many packs you buy. (*As of 01/09/22, USPS has raised rates (again) on USPS first class, I apologize for the high shipping costs relative to item cost)
Paypal gift/Friends & Family or trade (listed below)
IM only, NO emails please.
All bands are cut by hand (i.e. these are not cut with machine precision, most cut imperfections "disappear" once the band is stretched out) and width may vary from band to band from 0.8"-1.0" (approximately). The bands are cut wide, so they will be stiff: trim them to a thinner width (i.e. .5-.6") if needed to get more stretch out of them. Also, all rubber has various material thicknesses, stiffness/"stretchiness", and variation in material characteristics (I will try to note if anything seems super stiff or super weak, etc).
These are old school "tech" and perfect for the cloners out there. Fitment will vary and I've only used these various sizes on a sample from my personal rifles so I cannot vouch that they will fit every stock/rail/grip/etc. I cut these various sizes for my own guns and just kept on going.
Will consider trades for (can add $ on my end):
-GG&G (or aridus) Magpul (Mossberg) stock adapter for Beretta 1301
-KAC URX-3/3.1 accessories
-Haley strategic offset scout mount
-Blue Force Gear Slings (Black, Grey, or Green preferred)
-Forward Controls Design Parts
-AR, AR10 (DPMS/SR25), Glock 9mm (19, 17, or larger), AK, sig p365, Ruger 10/22 mags
-Magpul ACS QD Sling Mount Kit - Type 3
-"odd" colored dark green or greenish tinted parts/mags/etc (home-made rit dye'd OD green will be considered)
-Esstac shotgun cards
-12G snap caps