Up for sale is a 2018 Husqvarna Vitpilen 701. I am the second owner, and it has 2315 miles. I purchased it with 1656 miles from the original owner, who claimed it was serviced by a dealer in Charlotte. I immediately dropped the oil, and have since changed it every season with an OEM KTM filter/screens/orings and Motorex Power Synth 4T 10w50. I currently hold clean title in hand.
Shortly after purchasing the bike I ordered many custom parts from BadWinners in France, which quoted me a time of 3-4 weeks to ship. I tore the bike down while waiting for the parts, which arrived... a year later. As such, not too many miles were put on the bike while it sat on a rear stand in the garage waiting on parts.
The reason for selling is I like to build bikes into the vision I have, enjoy them some, and move onto the next project.
The whole purpose of this build was to make the bike as absolutely lightweight as possible. According to my bathroom scale method the bike weighs in at 330lbs wet! I haven't verified this on a real scale, but given how the bike feels it seems accurate.
The bike has lots of upgrades which include the following...
- Badwinners custom Subframe/Tail/Leather Seat/LED Rear Light
- BW Color Digital Dash Display
- BW Belly Pan Bracket
- BW o2 Sensor Eliminator/EVAP Canister Delete/SAS Delete Plate
- BW Carbon Fiber Front Fender
- BW Carbon Fiber Gas Tank
- BW Carbon Fiber Belly Panels
- Carbon Smith custom built Carbon Fiber Tail Assembly (The BW tail was painted fiberglass)
- Carbon Fiber Heel Guards
- Carbon Fiber Rear Fender/Chain Guard
- Carbon Fiber Engine/Clutch/Sprocket Covers
- Carbon Fiber Radiator Surround
- Motogadget Mblaze Tens1 Rear LED Signals
- Motogadget Mblaze Pin Front LED Signals
- Antigravity AG-801 Lithium Battery (less than 2lbs!)
- Powercommander V with custom BW map for open exhaust/intake (Also have a Rottweiler Performance map for use with DB Killer installed)
- K&N Air Filter
- Titanium Header
- Titanium Link Pipe
- SC Project/BW GP70R Titanium Exhaust w/custom Exhaust Bracket & removable DB Killer
- Oberon Billet Clutch Slave Cylinder
- FactoryPro Ceramic Bearing Shift Kit
- 15T Front KTM Sprocket/42T JTR Rear Sprocket (no additional weight compared to stock sprockets)
- DID VR46 Chain
- KTM OEM Heated Grips
- CRG Arrow Bar End Mirrors
- Rizoma Gas Cap
- R&G Tank Grips
- R&G Front Axle Sliders
- R&G Rear Slider Spools
- OEM Upgraded Footpegs/OEM Silver Tank Trim Surround/OEM Husqvarna White Decals
In addition I still have all of the OEM parts, which will go along with the bike (subframe/exhaust/mirrors/body panels/etc) should the next buyer wish to put all or partly back to stock. Please let me know if you have any questions. It is available for pickup in Raleigh, NC. If you need the bike shipped I would be happy to meet with the shipping driver.