User Panel
User Panel
User Panel
|
Posted: 10/10/2013 5:58:43 AM EDT
[Last Edit: Slash]
 CAR-10 Buffer - 5.5 ounces - $110 A CAR-10 buffer will allow you to use any AR-15 collapsing stock on your AR10, SR25, LMT, POF or DPMS-pattern .308 rifle. Standard carbine length stocks cannot be used on these rifles with regular carbine buffers. This is strictly a 'Drop-In' part, no gunsmithing or modifications are required. This product is specifically recommended by Magpul for use with their carbine stocks on .308 ARs. (Call them!) CAR-10 buffers also work great with any other stock using a standard 7" carbine buffer tube. CAR-10 buffers are shorter and heavier than standard carbine buffers. Constructed of 303 Stainless Steel with a sliding Tungsten anti-bounce counterweight. Heavy buffers reduce felt recoil for the shooter, and minimize wear and tear on the gun. Many users report that a CAR-10 buffer significantly increased the reliability of their firearms. I recommend using .308 Carbine Buffer Springs with these buffers. I have these springs custom manufactured specifically for use with the CAR-10 buffers. OEM springs from other manufacturers or aftermarket springs may cause malfunctions. 'Flat-Wire' springs are not recommended for any application. Also available - CAR-10 XH Buffer - 6.5 ounces - $125 Extra-Heavy model for suppressed weapons, or for maximum recoil reduction in non-suppressed guns. I strongly recommend this buffer if any of the following conditions apply:
Note: Not compatible with AR-15s. This buffer is only for use in .308 ARs with standard 7" deep AR-15 carbine receiver extensions. If you have an ArmaLite/VLTOR A5 extended length tube (7-5/8" deep) please see the XH Carbine buffer. CAR-10 buffers are for ArmaLite and SR25/DPMS-pattern .308 guns. For those with Bushmaster or RRA .308s, I also make a buffer that will work in your guns. Please see website for more details. Questions? Please contact me via email, NOT IM.  Quantity/dealer discounts available on orders of five or more buffers. |
|
|
|
|
Posted: 11/1/2013 2:28:35 AM EDT
[#1]
^
|
|
|
|
|
Posted: 11/27/2013 3:48:10 AM EDT
[#2]
^
|
|
|
|
|
Posted: 12/27/2013 1:43:07 AM EDT
[#3]
^
|
|
|
|
|
Posted: 2/7/2014 7:34:51 PM EDT
[#4]
^
|
|
|
|
|
Posted: 4/10/2014 3:59:45 PM EDT
[#5]
^
|
|
|
|
|
Posted: 5/30/2014 2:02:37 AM EDT
[#6]
^
|
|
|
|
|
Posted: 7/1/2014 6:26:38 AM EDT
[#7]
^
|
|
|
|
|
Posted: 8/10/2014 3:34:30 PM EDT
[#8]
^
|
|
|
|
|
Posted: 10/1/2014 9:52:50 AM EDT
[Last Edit: dasboots]
[#9]
Purchased the buffer & spring set the other day. It should be on the way.
Edit: Received the merchandise when I got home. Now, that is fast. |
|
|
|
|
Posted: 10/3/2014 1:32:13 AM EDT
[#10]
^
|
|
|
|
TX, USA
|
Posted: 10/14/2014 2:29:04 PM EDT
[#11]
Thanks for your help Clint, I will be ordering shortly!
|
|
|
KY, USA
|
Posted: 11/9/2014 3:51:26 PM EDT
[#12]
I bought mine about 8 years ago.. I know he has sold MANY. I had changed stocks and had a jamming problem.
After installing my heavy buffer, I never had another single jam (except a couple ammo related over the years). Definitely solved my problem immediately! 
|
|
|
|
Posted: 12/4/2014 7:02:33 AM EDT
[#13]
^
|
|
|
|
CA, USA
|
Posted: 12/13/2014 3:34:14 AM EDT
[#14]
Is this the preferred spring and buffer for using a Magpul UBR stock on a LR .308 with a midlength gas system?
|
|
|
|
Posted: 12/13/2014 6:19:12 AM EDT
[#15]
Quote HistoryOriginally Posted By Javony: Is this the preferred spring and buffer for using a Magpul UBR stock on a LR .308 with a midlength gas system? |
|
|
|
|
Posted: 2/4/2015 5:43:15 AM EDT
[#16]
...
|
|
|
|
|
Posted: 4/5/2015 11:54:58 PM EDT
[#17]
^
|
|
|
|
|
Posted: 5/10/2015 11:33:59 AM EDT
[#18]
I'll take one. Order placed. Thanks!
|
|
|
|
AZ, USA
|
Posted: 5/29/2015 4:40:46 PM EDT
[#19]
Hey Clint -
I'm running a pretty stock 14.5" Hogan with a Griffin RSTA suppressor and brake mount pinned & welded. It runs fine unsuppressed but with the can on (and the piston correctly flipped) it seems to cycle too fast and the bolt closes on an empty chamber about 6 out of 10 times, empties eject fine. I'm thinking the XH buffer and your spring, yes? |
|
|
|
Posted: 5/29/2015 5:29:12 PM EDT
[#20]
Quote HistoryOriginally Posted By rlavaty: Hey Clint - I'm running a pretty stock 14.5" Hogan with a Griffin RSTA suppressor and brake mount pinned & welded. It runs fine unsuppressed but with the can on (and the piston correctly flipped) it seems to cycle too fast and the bolt closes on an empty chamber about 6 out of 10 times, empties eject fine. I'm thinking the XH buffer and your spring, yes? |
|
|
|
AZ, USA
|
Posted: 5/30/2015 11:17:46 AM EDT
[#21]
Quote HistoryOriginally Posted By rlavaty:
Hey Clint - I'm running a pretty stock 14.5" Hogan with a Griffin RSTA suppressor and brake mount pinned & welded. It runs fine unsuppressed but with the can on (and the piston correctly flipped) it seems to cycle too fast and the bolt closes on an empty chamber about 6 out of 10 times, empties eject fine. I'm thinking the XH buffer and your spring, yes? I am. Thanks, I'll get an order in next week |
|
|
|
Posted: 6/29/2015 4:16:22 AM EDT
[#22]
^^
|
|
|
|
OH, USA
|
Posted: 7/16/2015 11:11:19 PM EDT
[Last Edit: sharpshooter33]
[#23]
Clint,
I'm putting a UBR on my AR10 20"....The barrel is threaded and I may buy a can some time in the future . Which is the best buffer for the AR10 with UBR with possibly future can? the CAR XH? Also where in Ohio u located? I'm in Cincy |
|
|
|
Posted: 7/16/2015 11:23:07 PM EDT
[#24]
A CAR-10 XH and a .308 carbine buffer spring would be best.
I'm near Findlay, about an hour south of Toledo. |
|
|
|
OH, USA
|
Posted: 7/17/2015 3:39:43 PM EDT
[#25]
I had a brother that lived in Toledo.
Thanks for the input I'll probably be ordering one in the next week or so. |
|
|
|
Posted: 7/29/2015 11:24:44 PM EDT
[#26]
^^
|
|
|
|
OH, USA
|
Posted: 8/10/2015 11:19:56 PM EDT
[#27]
picked on up from Brownells... I'd like to see them carry the CAR10 -XH too.
Also didn't realize my full length buffer in my AR10 had died until I took it out to convert over. interesting. |
|
|
|
Posted: 10/1/2015 2:41:57 PM EDT
[#28]
^^^
|
|
|
|
|
Posted: 11/21/2015 12:04:20 PM EDT
[#29]
Order placed....
|
|
|
|
|
Posted: 1/4/2016 6:24:16 AM EDT
[#30]
|
|
|
|
|
Posted: 2/17/2016 6:59:52 PM EDT
[#31]
What is the recommended setup for using a VLTOR A5 tube on a suppressed 308 platform?
|
|
|
|
|
Posted: 2/17/2016 11:15:48 PM EDT
[Last Edit: Slash]
[#32]
Quote HistoryOriginally Posted By enotsyerg: What is the recommended setup for using a VLTOR A5 tube on a suppressed 308 platform? AR-10 rifle buffer spring - www.heavybuffers.com/springs This combination works great for any .308 AR with an extended (7.625") receiver extension. This includes ArmaLite, LMT, Smith and Wesson, Larue POF, LWRC and many others (virtually any .308 AR with a 3.25 inch long buffer). Performs equally well with or without a suppressor. |
|
|
|
|
Posted: 4/18/2016 3:36:15 AM EDT
[#33]
^^^
|
|
|
|
|
Posted: 6/7/2016 1:27:47 PM EDT
[#34]
^^^
|
|
|
|
|
Posted: 8/10/2016 4:08:23 PM EDT
[#35]
^
|
|
|
|
OH, USA
|
Posted: 10/14/2016 7:41:46 PM EDT
[#36]
Quote HistoryOriginally Posted By Slash:
XH carbine buffer (8.5 oz) - www.heavybuffers.com/xhcarAR-10 rifle buffer spring - www.heavybuffers.com/springs This combination works great for any .308 AR with an extended (7.625") receiver extension. This includes ArmaLite, LMT, Smith and Wesson, Larue POF, LWRC and many others (virtually any .308 AR with a 3.25 inch long buffer). Performs equally well with or without a suppressor. Quote HistoryOriginally Posted By Slash:
Originally Posted By enotsyerg:
What is the recommended setup for using a VLTOR A5 tube on a suppressed 308 platform? This combination works great for any .308 AR with an extended (7.625") receiver extension. This includes ArmaLite, LMT, Smith and Wesson, Larue POF, LWRC and many others (virtually any .308 AR with a 3.25 inch long buffer). Performs equally well with or without a suppressor. I just order this set up for the A5 tube, looking forward to trying it!.... 
|
|
|
|
Posted: 11/26/2016 12:45:46 AM EDT
[#37]
Just picked up a new DPMS Sportical today.
What heavy CAR buffer and spring do I need to run a can on this thing ? Also thinking about putting an A2 stock and extension on it. Can you give me options for both A2 and CAR configs that will work with a suppressor ? Thanks ! 
|
|
|
|
|
Posted: 11/26/2016 3:24:21 AM EDT
[Last Edit: Slash]
[#38]
I'm going to assume that your current buffer tube is 7" deep (2.5" long buffer).
For that configuration I recommend a CAR-10 XH buffer (6.5 oz) and a .308 carbine buffer spring. More info here: www.heavybuffers.com/car10xh If you upgrade to a rifle length stock I suggest a AR10R-XH buffer (10 oz) and a .308 rifle buffer spring. More info here: www.heavybuffers.com/ar10rxh |
|
|
|
|
Posted: 12/1/2016 3:45:29 AM EDT
[#39]
|
|
|
|
|
Posted: 12/10/2016 10:50:23 PM EDT
[#40]
What is the recommended buffer spring setup for a Larue 7.62 tobr? I need it to run supressed and un suppressed. Running all factory parts tube and rat stock.
Pete |
|
|
|
|
Posted: 12/10/2016 11:16:30 PM EDT
[Last Edit: Slash]
[#41]
Quote HistoryOriginally Posted By icecold1:
What is the recommended buffer spring setup for a Larue 7.62 tobr? I need it to run supressed and un suppressed. Running all factory parts tube and rat stock. Pete I recommend an XH carbine buffer (8.5 oz) and a .308 RIFLE buffer spring (#EA1095). XH Carbine Buffer Buffer Springs |
|
|
|
WA, USA
|
Posted: 1/13/2017 8:40:22 PM EDT
[#42]
I used your buffer years ago so I kind of forgot what I need here.
I have a Armalite AR10 with A2 stock and I'm wanting to replace it with a std BCM reciever extension as to use a adjustable stock. Which buffer and spring do I need? Thanks |
|
|
|
Posted: 1/13/2017 8:46:33 PM EDT
[#43]
Quote HistoryOriginally Posted By hotbiggun42:
I used your buffer years ago so I kind of forgot what I need here. I have a Armalite AR10 with A2 stock and I'm wanting to replace it with a std BCM reciever extension as to use a adjustable stock. Which buffer and spring do I need? Thanks CAR-10 XH |
|
|
|
WA, USA
|
Posted: 1/13/2017 9:43:40 PM EDT
[#44]
Quote HistoryOriginally Posted By Slash:
For a standard 7" carbine buffer tube I recommend a CAR-10 XH buffer and spring. CAR-10 XH Slash when I add to the cart it gives me an error message. |
|
|
|
Posted: 1/13/2017 10:47:40 PM EDT
[#45]
Quote HistoryOriginally Posted By hotbiggun42:
Slash when I add to the cart it gives me an error message. Please send me an email through the website with a list of the items you need I'll send you a PayPal invoice (I'll pay the fees). Sorry for the inconvenience. |
|
|
|
|
Posted: 2/9/2017 6:34:19 AM EDT
[#46]
|
|
|
|
SC, USA
|
Posted: 4/15/2017 3:53:15 PM EDT
[#47]
I have a PSA PA-10 in .308 with a mid-length gas system, it has their collapsible stock buffer tube on it. What buffer/spring would I need for it to maximize recoil reduction? I am using their H3 buffer right now with stock spring.
|
|
|
|
Posted: 4/15/2017 3:59:16 PM EDT
[Last Edit: Slash]
[#48]
Quote HistoryOriginally Posted By dale45auto:
I have a PSA PA-10 in .308 with a mid-length gas system, it has their collapsible stock buffer tube on it. What buffer/spring would I need for it to maximize recoil reduction? I am using their H3 buffer right now with stock spring. www.heavybuffers.com/xhcar www.heavybuffers.com/springs |
|
|
|
SC, USA
|
Posted: 4/15/2017 5:15:42 PM EDT
[#49]
Thanks for the help! ??
|
|
|
SC, USA
|
Posted: 4/15/2017 5:18:05 PM EDT
[#50]
Quote HistoryOriginally Posted By Slash:
I recommend an XH Carbine buffer (8.5 oz) and a .308 rifle buffer spring (#EA1095). www.heavybuffers.com/xhcar www.heavybuffers.com/springs 
|
|
|
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
.jpg)
