- Joined Mar 2014
- Posts 28
-
EE 100% (9)
FL, USA
|
Posted: 5/11/2024 12:58:45 PM EDT
[Last Edit: soupnutz]
*All offers still need to be accepted by the seller
Edited on 5/17/2024 10:16:05 PM EDT
N/A
FL
US Only
Digital Payment
FFL: No
Condition: Pre-Owned
Think I'm ready to sell my pair of Anvis 6's. Dont use them and have some other hobbies to fund. The details are as follows:
The good -Anvis 6 objective lenses with contract tubes, the contract # can be seen in the pictures, no spec sheets. -Crye nightcap with battery pouch -Wilcox 3 hole shroud with lanyard -Chinese knockoff GSGM mount -Low profile battery pack -clip-on battery pack -steiner TOR-mini IR laser (no pics) currently mounted on my rifle The rest of the items aren't necessary for operation but will be included with sale -HGU-55 mount, (attaches to crye nightcap via 4-hole mounts but needs shimmed to sit properly) -Two anvis aviation helmet mounts, (no pigtail, the power wiring is internal to helmet) -Three housing assemblies -One PAS, (no picture at the moment)
The bad Not sure of the nomenclature but the PAS circuit card thing has been removed. Always had issues with the wires pulling out or the card getting mashed during adjustment so 26ga wire has been used instead. Was twisted and soldered with heatshrink applied. No PAS cap on the underside, (viewable in pics) No purge or professional collimation
The ugly Right tube has a zone 2 blem at about the 3 o clock position, (marked in pics) Left tube has a slight bright spot in zone 2 at about the 9 o-clock position, (marked in pics) A little peppering on the outer edges.
Pretty solid set up with everything you need to get going if you want to get into some gen 3 duals at a decent price.
|
|