User Panel
Posted: 1/17/2020 3:38:05 PM EDT
Started digging after the R9 thread...and found this.
https://yhm.net/kurz-kit.html Doesn't have a weight yet but shortens the YHM QD by 0.675". I am very interested in this for the Resonator R2 I have pending. |
|
This is what Ive been waiting for since they announced the Turbo K. I like their mounting system but the full size module just looks terrible compared to how nice their suppressors look. Almost like an afterthought. YHM cant stop reaching into my wallet.
|
|
So if I use this instead of the QD brake mount my Turbo came with it will shorten the overall length of my barrel and suppressor combo by a half inch? Hey hat would be real nice.
|
|
Quoted:
So if I use this instead of the QD brake mount my Turbo came with it will shorten the overall length of my barrel and suppressor combo by a half inch? Hey hat would be real nice. View Quote So you could possibly shave a couple ounces off the weight of the Turbo. Also their original qd mount adds an ounce or 2 over the direct thread. Edit: Sorry can only work on something with the omega threading so a T2 or K. |
|
Dam this might be what pushes me over the edge to get the turbo k
|
|
Looks like they answered this question on their facebook page: " You will see about a 1-2 dB increase. The Kurz Kits were designed for those trying to make the most compact build they possibly can. " |
|
Quoted:
Very nice. I want a PS90 SBR and a Turbo K... View Quote Attached File |
|
|
Quoted: It’s a fantastic combo. https://www.AR15.Com/media/mediaFiles/101965/B82FEECC-122A-4683-9173-3C7DF2BDE6F1_jpe-1270930.JPG View Quote As for the Kurz kits, do they only work with the Mini QD, or are the other YHM muzzle devices ok? |
|
View Quote Wish you had an option to replace the standard mounts with the Kurz or even buy the can without and mounts/brake. |
|
Quoted:
As for the Kurz kits, do they only work with the Mini QD, or are the other YHM muzzle devices ok? View Quote |
|
Quoted:
I'm curious about this as well. I'm guessing it would depend on the specific can and if there's enough space between the blast baffle and mount for the full size muzzle devices? View Quote View All Quotes View All Quotes Quoted:
Quoted:
As for the Kurz kits, do they only work with the Mini QD, or are the other YHM muzzle devices ok? Not exact words but you can check the YHM industry section for his exact answer. |
|
Quoted:
Looks like they answered this question on their facebook page: " You will see about a 1-2 dB increase. The Kurz Kits were designed for those trying to make the most compact build they possibly can. " View Quote Also, if I get a direct thread mount from @hansohnbrothers, will it also be louder than they way the turbo k comes stock? |
|
I would assume it’s slightly louder due to decreased volume.
I’m curious how much shorter the MD needs to be to fit. I cut a port off prior to YHM releasing the mini brake, doubt it would fit though. I do like the Kurz kit though as another low pro 1.375x24 option. My three brake lengths. Attached File Side note: anyone have an easy fix for the washers after it’s timed? |
|
I want to use this on a Turbo K and on a Resonator R2 so that both can fit into my various ARs to keep the OAL minimum on my 10.5 & 11.5, and then use the resonator on my 308 bolt gun as well. Will that be possible? E.g., will the Kurz kit work on both suppressors and will 5/8x24 mini QD muzzle devices be available for the 308?
If so that will make a great little coverage combo, allowing me cover most my rifle needs with the pair. Like having 2 suppressed ARs simultaneously when out with a buddy, and cover my 308 bolt for precision shooting with the Resonator. |
|
Does anyone know if the 762 mini brake will fit in the mount sold as a 555 kit? I believe I read somewhere that YHM made them so a 762 can mount on a 556 but the 556 mount will not work with a 762 muzzle device.
|
|
All of our current 5.56 and .30 cal mounts will fit into both the Phantom Adapter YHM-3060 and the New Kurz Kit YHM-3050. The mount length will become the deciding factor based on the internal geometry of your suppressor and the blast baffle location.
|
|
Quoted:
All of our current 5.56 and .30 cal mounts will fit into both the Phantom Adapter YHM-3060 and the New Kurz Kit YHM-3050. The mount length will become the deciding factor based on the internal geometry of your suppressor and the blast baffle location. View Quote |
|
Quoted:
All of our current 5.56 and .30 cal mounts will fit into both the Phantom Adapter YHM-3060 and the New Kurz Kit YHM-3050. The mount length will become the deciding factor based on the internal geometry of your suppressor and the blast baffle location. View Quote If I'm understanding this correctly, you can use the new Kurz Kit (YHM-3050) with any of the current Phantom QD mounts (YHM-5M2-Q.D.) or (YHM-3102-28)? Or do I need to buy the shorter brake (YHM-3102-1MB) for rifles that already have a YHM QD mount? |
|
Quoted: I may be a moron, but can you walk me through this? If I'm understanding this correctly, you can use the new Kurz Kit (YHM-3050) with any of the current Phantom QD mounts (YHM-5M2-Q.D.) or (YHM-3102-28)? Or do I need to buy the shorter brake (YHM-3102-1MB) for rifles that already have a YHM QD mount? View Quote |
|
Quoted:
Also wondering - will these work on the first generation Turbo K cans with the Micro QD? View Quote View All Quotes View All Quotes Quoted:
Quoted: I may be a moron, but can you walk me through this? If I'm understanding this correctly, you can use the new Kurz Kit (YHM-3050) with any of the current Phantom QD mounts (YHM-5M2-Q.D.) or (YHM-3102-28)? Or do I need to buy the shorter brake (YHM-3102-1MB) for rifles that already have a YHM QD mount? |
|
The Turbo-Ks are all threaded the same so it should work just fine, no?
|
|
The Mini QD Brakes are compatible with all of our YHM Phantoms, Turbos, Turbo Ks, Resonators, and Nitros. The other adapter that's included with the YHM-3050 kits fits all YHM Turbo K, Turbo T2, Resonator K, and Resonator R2 suppressors or any other suppressor on the market that uses the common 1-3/8" 24 TPI thread interface. If running the Kurz adapter you can run any of our 5.56 sized mounts or our 4302 series .30 cal mounts in the Resonator R2 and Resonator K. If running a Turbo T2 or Turbo K the mini brake must be used.
|
|
Quoted:
The Mini QD Brakes are compatible with all of our YHM Phantoms, Turbos, Turbo Ks, Resonators, and Nitros. The other adapter that's included with the YHM-3050 kits fits all YHM Turbo K, Turbo T2, Resonator K, and Resonator R2 suppressors or any other suppressor on the market that uses the common 1-3/8" 24 TPI thread interface. If running the Kurz adapter you can run any of our 5.56 sized mounts or our 4302 series .30 cal mounts in the Resonator R2 and Resonator K. If running a Turbo T2 or Turbo K the mini brake must be used. View Quote Thank you for the clarification! |
|
|
Quoted:
The Mini QD Brakes are compatible with all of our YHM Phantoms, Turbos, Turbo Ks, Resonators, and Nitros. The other adapter that's included with the YHM-3050 kits fits all YHM Turbo K, Turbo T2, Resonator K, and Resonator R2 suppressors or any other suppressor on the market that uses the common 1-3/8" 24 TPI thread interface. If running the Kurz adapter you can run any of our 5.56 sized mounts or our 4302 series .30 cal mounts in the Resonator R2 and Resonator K. If running a Turbo T2 or Turbo K the mini brake must be used. View Quote ETA: would I just need the mini QD brake to mount my Turbo on? The original Turbo isn’t threaded for an adapter. |
|
So if I’m understanding that right, there’s no way to run this combo:
14.5” Barrel 5.56 needing a pin & weld muzzle device Turbo K w/ kurz adapter Because the mini qd brake and mini flash hider won’t bring a 14.5 up to 16” and you can’t run the normal size brakes/flash hider because that is too long to fit into the rear end blast chamber of a turbo K with the kurz adapter on it. Is that correct? Any device that can go on a 14.5 AR pin and weld and operate with the Turbo K with kurz? |
|
Quoted:
So if I'm understanding that right, there's no way to run this combo: 14.5" Barrel 5.56 needing a pin & weld muzzle device Turbo K w/ kurz adapter Because the mini qd brake and mini flash hider won't bring a 14.5 up to 16" and you can't run the normal size brakes/flash hider because that is too long to fit into the rear end blast chamber of a turbo K with the kurz adapter on it. Is that correct? Any device that can go on a 14.5 AR pin and weld and operate with the Turbo K with kurz? View Quote |
|
|
I think that when I get my SDN6 back from AAC, for end cap repair, I am going to send it and my old 18t M4-2k to ECCO and have both of them modded to work with the YHM Kurz kits.
Both of those suppressors are pretty much dedicated to specific hosts and rarely shot without their suppressors. Anybody see any issues with my plan? |
|
Quoted:
You must use the short brakes with the Kurz Kit. A better option would be to spend $200, make an SBR, not worry about muzzle device lengths and the pain pin and weld is, IMHO. View Quote That's the route I'm going these days. Hell I've got 14.5's with SBA3. Pin and weld is a pain in the ass, especially if your changing out rails etc. somewhat occasionally. Form 1's coming back <1 month is the way to go. |
|
I have my reasons not to SBR or pistol, i do already have a 10.5 and 11.5 with tail hook mod 2s.
The mini flash hider is listed at 2 1/8 inches. With AR threads being about 1/2” shouldn’t that bring 14.5 to 16 and allows for turbo K with kurz? |
|
I emailed YHM and they stated the following, so it appears you do not need the mini to work with the kurz kit adapter necessarily.
The YHM-3102, YHM-3102-1mb, and the YHM-5m2-qd will work with the Turbo K and Kurz kit together. The YHM-3102 and the YHM-5m2 will bring you 14.5 inch barrel up to a carbine length after you pin and weld it. The Mini will not. |
|
Quoted:
I emailed YHM and they stated the following, so it appears you do not need the mini to work with the kurz kit adapter necessarily. The YHM-3102, YHM-3102-1mb, and the YHM-5m2-qd will work with the Turbo K and Kurz kit together. The YHM-3102 and the YHM-5m2 will bring you 14.5 inch barrel up to a carbine length after you pin and weld it. The Mini will not. View Quote If you install the kurz adapter on a silencer whose blast baffle is deep enough, you can use the long muzzle devices. If it isn't deep enough, you'll only be able to use the mini muzzle devices because the longer ones will contact the blast baffle and prohibit the can from seating. |
|
New to the scene, but reading up..so don’t beat me up to bad
So these Kurz kits will work with the resonator2 and the resonator K ? The 762 cans? Was t sure if I was following right |
|
|
|
Is the Kurtz kit available with a mini flash hider instead of the mini brake, for those who dislike muzzle brakes?
|
|
|
Quoted:
The Kurt Kits only come with a brake at this time. View Quote |
|
All I want to know is if I could use this mount with my original turbo and reduce length of my rifle? Can’t get an answer.
|
|
|
Quoted:
Ok, then let me clarify this: Will the low-profile Phantom QD Adapter that is part of the Kurtz kit, work with a YHM Mini Phantom Q.D. Flash Hider on a Resonator R2? I can live with a brake on the one rifle (a longer barreled bolt gun) but would really prefer a flash hider on the AR15's. Or would I have to stick with the standard full-size QD mounts? View Quote |
|
Quoted:
I emailed YHM and they stated the following, so it appears you do not need the mini to work with the kurz kit adapter necessarily. The YHM-3102, YHM-3102-1mb, and the YHM-5m2-qd will work with the Turbo K and Kurz kit together. The YHM-3102 and the YHM-5m2 will bring you 14.5 inch barrel up to a carbine length after you pin and weld it. The Mini will not. View Quote I'm curious because I have an AUG with a 3102 FH which is the only QD muzzle device they make for that particular gun and I'm interested in a K model (Turbo or Res) but I hate the look of standard QD mount on the new cans and I want to be as compact as possible. |
|
Quoted:
This conflicts with the earlier post from YHM_Kevin tho if I read it correctly. He stats that you must use the mini brake with a Turbo T2/Turbo K, Kurtz combo. Can we clarify? Will the standard 3102 flash hider work in the Turbo T2/K, Kurtz combo or not? He does say the Res K with Kurtz will work with the 3102 FH. I'm curious because I have an AUG with a 3102 FH which is the only QD muzzle device they make for that particular gun and I'm interested in a K model (Turbo or Res) but I hate the look of standard QD mount on the new cans and I want to be as compact as possible. View Quote |
|
Quoted:
Ok, then let me clarify this: Will the low-profile Phantom QD Adapter that is part of the Kurtz kit, work with a YHM Mini Phantom Q.D. Flash Hider on a Resonator R2? I can live with a brake on the one rifle (a longer barreled bolt gun) but would really prefer a flash hider on the AR15's. Or would I have to stick with the standard full-size QD mounts? View Quote |
|
|
Quoted:
Yes the low profile adapter will work in conjunction with the Mini Flash hiders and the Resonator R2. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Ok, then let me clarify this: Will the low-profile Phantom QD Adapter that is part of the Kurtz kit, work with a YHM Mini Phantom Q.D. Flash Hider on a Resonator R2? I can live with a brake on the one rifle (a longer barreled bolt gun) but would really prefer a flash hider on the AR15's. Or would I have to stick with the standard full-size QD mounts? |
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.