User Panel
Ordered a bunch of .308 bullets & brass, along with a bunch of repack boxes. Got in 10lbs of RE-26 and 500 pcs of Win .308 brass.
Annealed ~ 600 pcs of brass. |
|
IYAOYAS
|
Loaded my very first completed cartridges, thanks to all on this forum for the information to make it possible! Helluva time to get into reloading . . .
Working up two loads in 6.5 Grendel, a 123gr BTHP Sierra load and a 95gr VMAX load, both over 8208 on once-fired Hornady brass. |
|
“Nil desperandum, -- Never Despair. That is a motto for you and me. All are not dead; and where there is a spark of patriotic fire, we will rekindle it.” - Samuel Adams
Future Warlord of Santa Monica |
Reloaded 200 rounds of 5.56 with varget,69gr SMK and cci primers.
Currently using a Hornady reamer for primer pockets. Is the dillon super swage 600 a better and faster option to get uniform primer pockets? |
|
|
Deleted
|
|
|
Loaded my first sustained session...500 rounds of the 9mm recipe in (one of) my previous post(s).
Takeaways... I NEED A CASE FEEDER! I need the Inline Fab 4" Riser for the press quick change. I need a roller/ergo handle. Need a bigger tub for the "whoopsies". |
|
Tom Sawyer.
|
Now that I got my XL650 running 100%, no powder spills or primer issues, I'm going to sell it.
Ordered a XL750. I just wanted a new and shiny press. |
|
Remember - I was never here.
|
I shot some loads... Must have made an ooopps on powder throw some how.
9mm would not cycle the new P229 so I came home and tore them down. Found that the charges were stupid light at an average of 3.6gr vs 4.0gr Unique under a 124 FMJ. Reloaded that batch throwing an average of 4.5gr of Unique. Good news was the 7mm-08 enjoyed its loads. All in all a good day. |
|
|
Originally Posted By Henny: So, what did you do today in the world of reloading? View Quote this morning I bought a lot of various powders, bullets and a few primers at Scheels in The Colony this evening I am going to finish setting up both my Mec 600 Jr presses again |
|
|
Scored 1k Fed Mag LP primers at Sportsmans. Was tempted to buy a pound of 5744...
Yesterday I scored 500 10mm cases from the local range for $40. |
|
|
For the last week I have been bouncing back and forth with processing about 4k .223 and loading 9mm. I finished sorting the .223 and culled the brass that I will be resizing to .300, should be done depriming tonight and then will swage and clean the pockets.
Having a big Elk hunt in October I have set up 2 single presses to load some .257 Weatherby and .300 win mag as I will be taking both rifles and will get started this weekend. |
|
You can’t truly call yourself peaceful unless you’re capable of great violence.
If you’re not capable of violence, you’re not peaceful, you’re harmless. |
Received and setup 12 Akro-Bins for storing components, and received and set-up my fancy dancy label maker, to label all the things.
|
|
==COLLECTIVISM IS SLAVERY==
Everyman, I will go with thee and be thy guide, In thy most need to go by thy side. |
Global Warming Hoax Skeptic before it was cool
WA, USA
|
Got 1k of 10mm brass decapped, first 2 loads in the wet tumblers.
|
Selling agent for Algores carbon credit scam.
Shooting and Reloading, one hobby feeds the other. |
It's been a while since I could post in this thread
Placed a big order at midway. Got some lee mold handles, bullet sizing does, templaq and a bunch of other stuff. Backordered a pro 4-20 lead pot and a 9mm mold. Then found 29lbs of lead decoy weights for $20 on craigslist. Soon I'll be casting again! |
|
|
Started on 9mm again last night. At about 85 rounds the e-clip in my Dillon deprimer broke.
Was able to slowly finish the rest of the primer tube. Called Dillon today. Replacement parts on the way. |
|
|
Just got some 45-70 brass in that I am cleaning up and getting ready to process
|
|
Hansan: "This is a .30 caliber, gas operated, clip fed, semi-automatic rifle....."
Soldier: "Look, you ain't sellin it to me, you're only showing me how it works." |
Bought 2lbs of Hunter, 1lb 760 and 1,000 Rem 9 1/2 large rifle primers at LGS.
Sized 50 30.06 cases. Hoping to score some small pistol primers tonight at different LGS when they open. |
|
|
I cleaned and lubricated my press, took inventory of my components, and rearranged my storage and press/tools to be 30 month old grandson proof.
Quite a task, more than I planned for. |
|
Z
|
Just punched out 50 300gr XTP .44 Mag loads with Lil Gun.
Just found a bag of .44 Mag brass that was hiding, so good times!!! More 240 gr JSP next. |
|
Enemy of the state.
|
Originally Posted By latama666: Bought 2lbs of Hunter, 1lb 760 and 1,000 Rem 9 1/2 large rifle primers at LGS. Sized 50 30.06 cases. Hoping to score some small pistol primers tonight at different LGS when they open. View Quote Update: No luck with pistol primers but I did pickup another 1,000 Rem 7 1/2 small rifle primers, a pound each of CFE223 and IMR4350. Also scored 200 9mm Hornady 115gr FMJ RN and 200 158gr XTPS, plus 100 Win 9mm casings. Got home early enough to de-cap 100 LC cases. Productive, but expensive day. |
|
|
Worked on reorganizing the work room(still got a ways to go), and fixed the wobble my work bench developed after I fixed the floor under it. Ordered arko bins to better organize my brass and bullets. Opened up the primer pockets on some crimped 223 and trimmed the same cases.
|
|
|
Originally Posted By DL1911: Started on 9mm again last night. At about 85 rounds the e-clip in my Dillon deprimer broke. Was able to slowly finish the rest of the primer tube. Called Dillon today. Replacement parts on the way. View Quote Local hardware store,,, 1/4" e-clips.. only down for trip to store,, not for a week.. |
|
|
Global Warming Hoax Skeptic before it was cool
WA, USA
|
Emptied both tumblers, dried the brass in the sun and got the last 2 batches going.
Loaded 50 work up loads with 800 X and 180 gr PC bullets. |
Selling agent for Algores carbon credit scam.
Shooting and Reloading, one hobby feeds the other. |
Finally figured out why my 9mm handloads suck so bad, turns out I was using undersized plated bullets I acquired 7 years ago and never marked. 0.353-0.354" diameter
Cut open a new box of Berry's 115 gr and did a quick ladder up at 4.0, 4.3 and 4.6 gr of titegroup and am instantly shooting better after struggling so much. 10 yds rapid fire: Attached File |
|
|
I haven’t reloaded in years, but today I punched out my second lot of 100rds of 9mm.
Followed the same recipe as last time, since they worked well out of my 3 most-shot pistols. 5.1gr Power Pistol 115gr Everglades Ammo FMJ Federal SPP That’s a starting load in my Speer manual. Shoots very smoothly. Gonna load up a ladder and see how they perform later this weekend. Need to find some 10mm equipment and components and work up a load this weekend for my new G20. |
|
RIP Sparky 1/15/15
"Did you not take into account I'm a noble savage? Unapologetic lifer for rock 'n roll!" |
Global Warming Hoax Skeptic before it was cool
WA, USA
|
Sorted the 500 10mm cases I wet tumbled yesterday.
Got the other 500 tumbled and almost dry when I went in tonight. They are under the ceiling fan and will be dry tomorrow for sorting. This batch of 1k only had 4 SPP cases and about 50 nickle cases. Sized 50 223 cases for a work up with 55 gr bullets using SW powder/s. They are in the dry tumbler getting homemade lube removed with plain corn cob. Haven't decided, Tactical Rifle, AR Plus, or Match rifle. I will probably get both and do all three, 50 rds each. |
Selling agent for Algores carbon credit scam.
Shooting and Reloading, one hobby feeds the other. |
Finally inventoried my components
Good on most everything but thin on LPP I did shoot .45acp, mostly Looks like now I’ll be shooting 9x19, mostly |
|
|
Deleted
|
|
|
Global Warming Hoax Skeptic before it was cool
WA, USA
|
Originally Posted By Armagosa: Found some 45 ACP dies at the LGS yesterday. Also picked up 500 Bear Valley cast 230 grain bullets. No primers to be found. I have 1,300 SP primers on hand but no LP primers. Some of my Blazer and Federal brass uses the small primers so I deprimed, tumbled and resized those last night. Any load suggestions using Bullseye, WW213, Unique or Trail Boss? Those are the powders I have. Just want a target load at 800 FPS. View Quote This is not a question/answer thread. |
Selling agent for Algores carbon credit scam.
Shooting and Reloading, one hobby feeds the other. |
Bought a 2lb dry chemical (B:C) disposable fire extinguisher for my reloading area. Home Depot has them on sale for 8.99, in my area.
|
|
Tom Sawyer.
|
Horse traded for a bunch of supplies and dies. Put up a new bench light. My old one died for no reason.
|
|
#shareyourspare Cola Warrior Veteran, 5x
|
Tested two ladders of N120 in 300 BLK. By some miracle they were right where they needed to be, so I have a load for one that works great. The other I’m going to tweak OAL a bit as I had a few failure to feeds. I also plan on going to a heavier spring now that I’ve moved away from LilGun so I’ll end up swapping that out on the SCS.
10mm on the other hand I’m at a loss on. 800-X will not give me consistent velocities, leading to high ES and high SD. The AutoTrickler is getting charge weights right on, so it’s not that. I have considered the possibility of recoil spring being too light (causing early unlock) but even with a heavier spring it does it. Going to circumvent the pass through powder/expander die with the powder and funnel it in the case directly. Only thing I can think of is it’s getting hung up in the die leading to inaccurate charge weights in the case. Other than that not sure what to do besides a different powder. Blue Dot or #9 maybe. DF if you have better luck with the 800-X you recently picked up PM me if you don’t mind so I can get specifics on what you’re doing. This is the first work up that has ever stumped me. |
|
|
Loaded up 500 rounds of my primary non HD load, which is always the same thing.
Blue Bullet 135gr TC's over True Blue. |
|
GRNC Benefactor- Support your state level 2A groups.
|
Sorted thru boxes of old catalogs and manuals. Found a 1996 Alliant Powder Reloaders Guide. Now I’ve got data to use the can of Reloder 12 that’s been waiting for a purpose.
|
|
|
Global Warming Hoax Skeptic before it was cool
WA, USA
|
Loaded up work up loads with AR Plus and the .224 bullets xdmikey sent me. https://www.ar15.com/forums/Armory/Junk-no-name-rifle-bullets-UPDATED/42-515577/?page=1&anc=5375119#i5375082 Sorted, put away the last 500 10 mm brass I wet tumbled. |
Selling agent for Algores carbon credit scam.
Shooting and Reloading, one hobby feeds the other. |
Went to the local gun/sporting goods/hardware/farm supply/cool stuff store yesterday after reading the "Best 32 ACP to buy" thread in GD.
Walked to the ammo shelf and sure enough, 6 boxes of brass cased 32 acp and 2 boxes of 25 acp were the only pistol ammo available. I bought 4 boxes of 32 acp for the brass. Came home, ordered a Beretta 81 for $315 shipped to a local FFL. Went to the loading bench, pulled out the 32 H&R mag dies and found a single piece of fired 32 acp brass in my stash and made a dummy round using a 75 gr Powder coated cast bullet to the exact OAL that my Lyman manual says to load to. This was the first time my manual had the EXACT cast bullet I had in the EXACT cartridge I was loading for. lol. I am excited about a new caliber. |
|
"No bastard ever won a war by dying for his country. He won it by making the other poor dumb bastard die for his country." George S. Patton
|
Originally Posted By boman250: Went to the local gun/sporting goods/hardware/farm supply/cool stuff store yesterday after reading the "Best 32 ACP to buy" thread in GD. Walked to the ammo shelf and sure enough, 6 boxes of brass cased 32 acp and 2 boxes of 25 acp were the only pistol ammo available. I bought 4 boxes of 32 acp for the brass. Came home, ordered a Beretta 81 for $315 shipped to a local FFL. Went to the loading bench, pulled out the 32 H&R mag dies and found a single piece of fired 32 acp brass in my stash and made a dummy round using a 75 gr Powder coated cast bullet to the exact OAL that my Lyman manual says to load to. This was the first time my manual had the EXACT cast bullet I had in the EXACT cartridge I was loading for. lol. I am excited about a new caliber. View Quote .32 ACP is fun to shoot, and the Beretta 81 should be a great pistol for it. My Colt 1903 Pocket Hammerless is a hoot to shoot. My loading activities today were more indirect. I received a nice 10” LCD monitor with HDMI, VGA and AV inputs ($50 from Amazon) on Friday. I’ll use this for several tasks, including having a direct wired monitor for my Raspberry Pi computer. But the AV input is important here, because the cheap little video camera I had stashed away from my previous work with my Hornady LnL AP is AV. After ensuring everything worked, I verified that the 12v power supply for the monitor will also power the camera through a Y cable. Yep, no sweat there. Now I’m working on a mount for the little camera. It’s roughly a cube 1” on a side with a cable coming out the bottom, and I need to have it pointed at the indicator on my powder scale. So far I have a pretty good idea for the mount, and I’ll have to build a power cable for it. Pictures later, maybe. |
|
"--you can't conquer a free man; the most you can do is kill him."
Heinlein NRA Life Member Glock Certified Armorer Certified AR15 Armorer Certified M1911 Armorer |
Had a full range session shooting my 9mm reloads.
Word out: When you test shoot your reloads, make sure you shoot a full mag or 2. When I test fired my reloads, they functioned fine when loading a mag 5 rounds. However, a full mag for my 1911 pushed the FN into the front of the mag body, i.e., they wouldn't feed. 3-5 rounds, no problem. For my 1911, I'll need RN and/or loading to a longer OAL. Full mag, the FN function fine in my Walther Q5. |
|
Tom Sawyer.
|
My project for this weekend was to convert a couple thousand fired milsurp 5.56 blanks to 300 Blackout.
My case conversion process is to cull out the unfired blanks, cut the fired blanks to length, decap, anneal, size, trim to length, and finally - check dimensions with case gauge. I'm pretty happy with the results and will be loading up some 220gr subs at some point this week. Attached File |
|
|
Resized, belled the case mouth and primed couple hundred 45-70 cases
|
|
Hansan: "This is a .30 caliber, gas operated, clip fed, semi-automatic rifle....."
Soldier: "Look, you ain't sellin it to me, you're only showing me how it works." |
|
Originally Posted By RNO: I found the secret cave where RL26 is, where StaBall 6.5 can be found and 1000 LR primers can be purchased. I see very little load data on forums for StaBall or where to find post for StaBall. I do have my own load info on RL26 and I see a lot of others using RL26 so I bought more RL26 and 1000 CCI 200 LR. No H1k or Retumbo https://i.imgur.com/XmuVlw7.jpg https://i.imgur.com/zU58s3R.jpg?1 View Quote Oh very nice, kegs of Unique AND Bullseye! I hope you bought both... |
|
|
Made some 9mm test loads for tomorrow.
Sorted range pickup brass, someone almost had a really bad day. Attached File |
|
Let me get my coffee first...
|
Originally Posted By Vegitan: Made some 9mm test loads for tomorrow. Sorted range pickup brass, someone almost had a really bad day. https://www.AR15.Com/media/mediaFiles/252483/20200913_135602_jpg-1590596.JPG View Quote Holy.... wow. I cast some bullets. My elbow is hurting me pretty bad lately so I called it quits after a couple hours... Then, I continued my torture test of 9mm cases. Made it to 20 firings with only 1 very minor casually so far. Nothing like posted above. |
|
"No bastard ever won a war by dying for his country. He won it by making the other poor dumb bastard die for his country." George S. Patton
|
Of course I talk to myself.. Sometimes I need Expert advice!
|
Processed brass today.
750 pieces of 9mm, 500 45acp, 200 44mag, 350 38spl, and ~100 9mm mak. Realized that while that was productive, I'm now in dire need of SPP. Loaded up 20 rounds of 270 win for this year's deer season to make myself feel better. |
|
Wait a minute.. wait a minute.. it might be up. -Mariner82
Gerbil porn is serious business.. -Seiran So, clear safety glasses for sodomy. Got it. -redoubt |
Originally Posted By Vegitan: Made some 9mm test loads for tomorrow. Sorted range pickup brass, someone almost had a really bad day. https://www.AR15.Com/media/mediaFiles/252483/20200913_135602_jpg-1590596.JPG View Quote Cant quite make out the headstamp, where is that from? That must have been well past 50k psi... wow |
|
|
Reamed and uniformed primer pockets for another 2k FC headstamped 223.
Converted another 2k once fired LC into blackout. Order 4K Hornady 62 grain pills. Will anneal the converted blackout tonight. |
|
|
Hansan: "This is a .30 caliber, gas operated, clip fed, semi-automatic rifle....."
Soldier: "Look, you ain't sellin it to me, you're only showing me how it works." |
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.