User Panel
User Panel
User Panel
|
Posted: 4/27/2020 10:19:34 PM EDT
[#1]
Quote HistoryOriginally Posted By sparky-kb: I don't know the weight fully loaded yet. I just got it put together last week or so and haven't gotten it completely set up and loaded out yet. I'll try to remember to weigh it once I do. The butt pack was the last piece to show up and I haven't had time to mess around with seeing what I can fit into it. I'm planning to move my medical stuff to the MOLLE on the sides of it though instead of stuffing it into a mag pouch. What I pack in it will depend on time of year and what I'm doing I suppose. Socks, a field stripped MRE, small weapons maintenance kit, iodine tabs, and poncho with some 550 are where I'm going to start. I've got a small waterproof bag to keep some of the stuff dry in there. I'll see how/if all that fits and adjust from there. The ruck I use is a medium ALICE with the MOLLE ruck shoulder pads and sleep system carrier. It's not Gucci but it works and can support a lot of weight. It's also short so the kidney pad sits above the belt but the top doesn't block my head too bad while laying prone. It also allows for ventilation since the pads kick the frame away from my back. Thank you for the update. The rig looks ideal for a setup allowing you to drop your pack and still have a basic 1 or 2 day sustainment. I like it. |
|
|
|
|
Posted: 4/29/2020 11:08:55 AM EDT
[#2]
   
|
|
|
|
KS, USA
|
Posted: 5/2/2020 4:58:56 PM EDT
[Last Edit: crag_dt]
[#3]
Here's mine.
Love the giant knife, but probably need to downsize  ATS outer/inner belt KT Mech Akela holster on drop mount- FNX 9 TOPS US Combat Knife EGL Loppy dump pouch HSGI TACO mag pouches- ATACS Have small multitool and Steamlight in pouch on TOPS sheath |
|
|
|
Posted: 5/2/2020 6:17:08 PM EDT
[#4]
Quote HistoryOriginally Posted By crag_dt: Here's mine. Love the giant knife, but probably need to downsize Have small multitool and Steamlight in pouch on TOPS sheath Had a similar setup for a bit. Moved the big knife to my sustainment pack. |
|
|
|
|
Posted: 5/4/2020 8:50:23 PM EDT
[#5]
Quote HistoryOriginally Posted By I9II_Maverick: https://www.AR15.Com/media/mediaFiles/397458/A9819E31-0364-42AB-9BDB-C58E25CF83A2-1389541.jpg https://www.AR15.Com/media/mediaFiles/397458/28305F6C-4D52-47A0-B655-9C55FB1E5DF9-1389547.jpg https://www.AR15.Com/media/mediaFiles/397458/C15327DB-FF6D-4554-85D2-C95495EC9CA7-1389546.jpg https://www.AR15.Com/media/mediaFiles/397458/3CE9CF7C-D357-415B-A7E3-967E1DFCE494-1389544.jpg Whats the TQ holder? |
|
|
|
|
Posted: 5/5/2020 6:46:00 PM EDT
[#6]
Quote HistoryOriginally Posted By slappomatt: whats everyone running for a dump pouch? I'm looking for something that can roll up somewhat compact, doesnt have to be tiny. will attach to a 1.75" belt and has a somewhat stiff mouth to hold it open. My brother and I both use BFG's dump pouch. Rolls up small when not in use, and weighs nothing. |
|
|
|
|
Posted: 5/6/2020 11:32:04 AM EDT
[#7]
Quote HistoryOriginally Posted By hessikin: The ESSTAC Hard Loops. They work great. Make sure you take the kydex insert out of the pouch before attaching the hard loops otherwise it's a massive pain in the ass. Quote HistoryOriginally Posted By hessikin: Originally Posted By GSDAK47: Are you using maclie clips or esstac belt loops for your mag pouches? The ESSTAC Hard Loops. They work great. Make sure you take the kydex insert out of the pouch before attaching the hard loops otherwise it's a massive pain in the ass. I’ve had great luck with 1” double-sided Velcro tape. I loop it through the MOLLE, then attach to the belt, with an extra bit of length at the end to loop around and tuck into the MOLLE again. It’s been solid as a rock for two years, and stays put on the belt. |
|
|
|
|
Posted: 5/6/2020 7:19:13 PM EDT
[#8]
Quote HistoryOriginally Posted By oldbrowndog: Whats the TQ holder? Quote HistoryOriginally Posted By oldbrowndog: Originally Posted By I9II_Maverick: https://www.AR15.Com/media/mediaFiles/397458/A9819E31-0364-42AB-9BDB-C58E25CF83A2-1389541.jpg https://www.AR15.Com/media/mediaFiles/397458/28305F6C-4D52-47A0-B655-9C55FB1E5DF9-1389547.jpg https://www.AR15.Com/media/mediaFiles/397458/C15327DB-FF6D-4554-85D2-C95495EC9CA7-1389546.jpg https://www.AR15.Com/media/mediaFiles/397458/3CE9CF7C-D357-415B-A7E3-967E1DFCE494-1389544.jpg Whats the TQ holder? Looks like a Soileater. |
|
|
|
NC, USA
|
Posted: 5/7/2020 2:45:49 PM EDT
[#9]
 -AWS LAB belt -IBX Tactical Kydex holster, mag carriers and TQ holder -Grey Ghost dump pouch -Homemade tear away IFAK (Homemade IFAK) -BLACKHAWK Double pistol mag pouch for handheld light and multitool |
|
|
AZ, USA
|
Posted: 5/8/2020 12:01:36 AM EDT
[Last Edit: BrianS2K]
[#10]
|
|
|
FL, USA
|
Posted: 5/8/2020 7:39:14 PM EDT
[#11]
 Finally got my belt setup. Tried to keep it minimal. I opted for no velcro on the inside as I’ll just be wearing this over my standard belt. It’s worked perfectly so far. Parts list: - SOE 1.75” D-Ring Cobra Buckle Riggers Belt - Safariland 2” UBL Mid-Ride w/ QLS - T.Rex Thigh Strap - T.Rex Ragnarok - Blue Force Gear Micro Trauma Kit - Blue Force Gear Belt Dump Pouch - Esstac 5.56 1+2 KYWI Shorty - Mechanix .5mm Covert Gloves |
|
|
PA, USA
|
Posted: 5/10/2020 9:22:19 PM EDT
[#12]
Quote HistoryOriginally Posted By tampatac0: https://i.imgur.com/6MhFP4f.jpg Finally got my belt setup. Tried to keep it minimal. I opted for no velcro on the inside as I’ll just be wearing this over my standard belt. It’s worked perfectly so far. Parts list: - SOE 1.75” D-Ring Cobra Buckle Riggers Belt - Safariland 2” UBL Mid-Ride w/ QLS - T.Rex Thigh Strap - T.Rex Ragnarok - Blue Force Gear Micro Trauma Kit - Blue Force Gear Belt Dump Pouch - Esstac 5.56 1+2 KYWI Shorty - Mechanix .5mm Covert Gloves Great setup! Love the all black. |
|
|
|
Posted: 5/10/2020 10:32:07 PM EDT
[#13]
Quote HistoryOriginally Posted By tampatac0: https://i.imgur.com/6MhFP4f.jpg Finally got my belt setup. Tried to keep it minimal. I opted for no velcro on the inside as I'll just be wearing this over my standard belt. It's worked perfectly so far. Parts list: - SOE 1.75" D-Ring Cobra Buckle Riggers Belt - Safariland 2" UBL Mid-Ride w/ QLS - T.Rex Thigh Strap - T.Rex Ragnarok - Blue Force Gear Micro Trauma Kit - Blue Force Gear Belt Dump Pouch - Esstac 5.56 1+2 KYWI Shorty - Mechanix .5mm Covert Gloves 
|
|
|
|
|
Posted: 5/11/2020 7:38:21 AM EDT
[#14]
 Added a TRex IFAK to my belt set up |
|
|
|
|
Posted: 5/11/2020 12:03:19 PM EDT
[#15]
Quote HistoryOriginally Posted By tampatac0: https://i.imgur.com/6MhFP4f.jpg Finally got my belt setup. Tried to keep it minimal. I opted for no velcro on the inside as I'll just be wearing this over my standard belt. It's worked perfectly so far. Parts list: - SOE 1.75" D-Ring Cobra Buckle Riggers Belt - Safariland 2" UBL Mid-Ride w/ QLS - T.Rex Thigh Strap - T.Rex Ragnarok - Blue Force Gear Micro Trauma Kit - Blue Force Gear Belt Dump Pouch - Esstac 5.56 1+2 KYWI Shorty - Mechanix .5mm Covert Gloves 
|
|
|
|
|
Posted: 5/11/2020 9:30:07 PM EDT
[#16]
For those with a 2.25” UBL with a 1.75” belt, are you having any issues with it sliding/ moving?
|
|
|
|
|
Posted: 5/11/2020 11:53:09 PM EDT
[#17]
Quote HistoryOriginally Posted By CapsFan: For those with a 2.25” UBL with a 1.75” belt, are you having any issues with it sliding/ moving? Not really. Leg strap helps, but I never noticed any vertical shift. |
|
|
|
|
Posted: 5/12/2020 11:22:03 AM EDT
[#18]
Quote HistoryOriginally Posted By CapsFan: For those with a 2.25” UBL with a 1.75” belt, are you having any issues with it sliding/ moving? I had no issues in 6 or 7 months, but ended up ziptying it in place for piece of mind. |
|
|
|
|
Posted: 5/12/2020 11:29:36 AM EDT
[#19]
Quote HistoryOriginally Posted By CapsFan: For those with a 2.25” UBL with a 1.75” belt, are you having any issues with it sliding/ moving? No. I found one of the 2.25 ones at a surplus store and used that for about a year before I found the correct sized one. Never noticed any additional movement with the bigger one. |
|
|
|
|
Posted: 5/12/2020 11:40:53 AM EDT
[#20]
I wish they made a 1.75" mid drop ubl. maybe even a touch less than mid drop. a 1/4 drop.
|
|
|
|
FL, USA
|
Posted: 5/13/2020 1:50:30 PM EDT
[Last Edit: ttac0]
[#21]
Quote HistoryOriginally Posted By slappomatt: what size pants do you wear. also I wish I wasnt fat. Quote HistoryOriginally Posted By slappomatt: what size pants do you wear. also I wish I wasnt fat. Really small. I ordered the belt in size 26, but I probably have the belt out at about 30" for going over clothing etc. I'm 5'6" 135lbs. Not easy to find gear that works for me. I'm having a plate carrier custom made for me now, by Gear Dynamics, for 8x10 SAPI plates. Originally Posted By hessikin: Great setup! Love the all black. After getting the black, I almost think it looks a little too "cop-ish" No offense to any LE with that statement. I'm not LE or MIL, I'm a civilian. I set this belt up for classes mainly. The reason I went with black is, if I were to need to use this belt in a non-class scenario... I'm thinking it will probably be dark outside/inside, so having black gear helps blend. |
|
|
|
Posted: 5/13/2020 3:32:20 PM EDT
[#22]
Does anyone using the inner and outer belt setup use belt keepers or do you guys just use the velcro on the belt?
|
|
|
|
|
Posted: 5/13/2020 3:51:25 PM EDT
[#23]
Quote HistoryOriginally Posted By l_Ferret_l: Does anyone using the inner and outer belt setup use belt keepers or do you guys just use the velcro on the belt? Just velcro. I used belt keepers in LE for retention purposes. Not so much now in a training environment. |
|
|
|
|
Posted: 5/13/2020 3:56:44 PM EDT
[#24]
Quote HistoryOriginally Posted By tampatac0: Really small. I ordered the belt in size 26, but I probably have the belt out at about 30" for going over clothing etc. I'm 5'6" 135lbs. Not easy to find gear that works for me. I'm having a plate carrier custom made for me now, by Gear Dynamics, for 8x10 SAPI plates. After getting the black, I almost think it looks a little too "cop-ish" No offense to any LE with that statement. I'm not LE or MIL, I'm a civilian. I set this belt up for classes mainly. The reason I went with black is, if I were to need to use this belt in a non-class scenario... I'm thinking it will probably be dark outside/inside, so having black gear helps blend. Quote HistoryOriginally Posted By tampatac0: Originally Posted By slappomatt: what size pants do you wear. also I wish I wasnt fat. Really small. I ordered the belt in size 26, but I probably have the belt out at about 30" for going over clothing etc. I'm 5'6" 135lbs. Not easy to find gear that works for me. I'm having a plate carrier custom made for me now, by Gear Dynamics, for 8x10 SAPI plates. Originally Posted By hessikin: Great setup! Love the all black. After getting the black, I almost think it looks a little too "cop-ish" No offense to any LE with that statement. I'm not LE or MIL, I'm a civilian. I set this belt up for classes mainly. The reason I went with black is, if I were to need to use this belt in a non-class scenario... I'm thinking it will probably be dark outside/inside, so having black gear helps blend. Isn't black a retro fashion statement.... Joking aside if you want something that doesn't stand out the darkish tan etc doesn't stand out as much as say a sand, but then again the pistol rifle and mags will probably draw more attention than the belt. 
|
|
|
|
USA
|
Posted: 5/13/2020 5:28:01 PM EDT
[#25]
Quote HistoryOriginally Posted By crag_dt: Here's mine. Love the giant knife, but probably need to downsize https://i.imgur.com/haTVaAp.jpg ATS outer/inner belt KT Mech Akela holster on drop mount- FNX 9 TOPS US Combat Knife EGL Loppy dump pouch HSGI TACO mag pouches- ATACS Have small multitool and Steamlight in pouch on TOPS sheath Yeah I love the knife too. I'm like the spaceship guy in the Lego movie when it comes to by Kabar. Surely there is a need for a big knife, right? |
|
|
|
Posted: 5/14/2020 1:35:19 AM EDT
[#26]
Quote HistoryOriginally Posted By 2tired2run: Isn't black a retro fashion statement.... Joking aside if you want something that doesn't stand out the darkish tan etc doesn't stand out as much as say a sand, but then again the pistol rifle and mags will probably draw more attention than the belt. |
|
|
|
|
Posted: 5/16/2020 6:21:39 PM EDT
[Last Edit: CheeksTac]
[#27]
Quote HistoryOriginally Posted By oldbrowndog: Whats the TQ holder? Super late reply It's a Soileater belt mounted TQ holder https://www.soileater.com/product-page/df3x-chestrig edit: I know the link says chest rig but can confirm its the tq holder |
|
|
|
|
Posted: 5/17/2020 9:03:27 AM EDT
[#28]
Quote HistoryOriginally Posted By CheeksTac: Super late reply It's a Soileater belt mounted TQ holder https://www.soileater.com/product-page/df3x-chestrig edit: I know the link says chest rig but can confirm its the tq holder Roger that, ordered two. Thank you! |
|
|
|
|
Posted: 5/17/2020 1:57:46 PM EDT
[#29]
Quote HistoryOriginally Posted By CapsFan: For those with a 2.25” UBL with a 1.75” belt, are you having any issues with it sliding/ moving? No. But I do have a leg strap from Trex looped through my UBL. Keeps every in place. |
|
|
|
AK, USA
|
Posted: 5/17/2020 7:15:54 PM EDT
[#30]
Quote HistoryOriginally Posted By CheeksTac: Super late reply It's a Soileater belt mounted TQ holder https://www.soileater.com/product-page/df3x-chestrig edit: I know the link says chest rig but can confirm its the tq holder You should get a commission. I just picked one up after seeing your post also. |
|
|
|
Posted: 5/20/2020 6:03:11 PM EDT
[#31]
What holster do you guys use on your belt? I'm looking for a mid or low rise to put on my Esstac belt.
|
|
|
|
|
Posted: 5/20/2020 6:08:50 PM EDT
[#32]
Quote HistoryOriginally Posted By WhiskersTheCat: What holster do you guys use on your belt? I'm looking for a mid or low rise to put on my Esstac belt. I have a safariland 6354DO on my esstac belt. It fits my RMR'd Glock 19 G4 with a TLR1 on it. |
|
|
|
|
Posted: 5/20/2020 6:50:57 PM EDT
[Last Edit: dj1975232]
[#33]
Quote HistoryOriginally Posted By WhiskersTheCat: What holster do you guys use on your belt? I'm looking for a mid or low rise to put on my Esstac belt. Safariland 6390RDS on my Esstac belt with a UBL and QLS. |
|
|
|
|
Posted: 5/20/2020 7:37:44 PM EDT
[#34]
Originally Posted By YaBoyKGTho: I have a safariland 6354DO on my esstac belt. It fits my RMR'd Glock 19 G4 with a TLR1 on it. Originally Posted By dj1975232: Safariland 6390RDS on my Esstac belt with a UBL and QLS. Any go to websites for these? Looks like there's deals to be had by not ordering direct from Safariland, but many websites say "with light" which isn't really helpful being as we all know there's multiple types. (Especially Amazon is like this) G17 with SF 300U |
|
|
|
|
Posted: 5/20/2020 7:40:31 PM EDT
[#35]
I got mine on EE
|
|
|
|
|
Posted: 5/20/2020 10:22:09 PM EDT
[#36]
|
|
|
|
|
Posted: 5/20/2020 11:04:59 PM EDT
[#37]
Probably the last configuration of my belt for a while for Warbelt Wednesday. I believe I hit the absolute sweet spot.
2x pistol 1x rifle Soileater BMTH Safariland with nub Spiritus fanny sack at 6:00  Attached File |
|
|
|
|
Posted: 5/20/2020 11:25:07 PM EDT
[#38]
Quote HistoryOriginally Posted By WhiskersTheCat: What holster do you guys use on your belt? I'm looking for a mid or low rise to put on my Esstac belt. |
|
|
|
|
Posted: 5/21/2020 5:51:55 PM EDT
[#39]
Quote HistoryOriginally Posted By WhiskersTheCat: Any go to websites for these? Looks like there's deals to be had by not ordering direct from Safariland, but many websites say "with light" which isn't really helpful being as we all know there's multiple types. (Especially Amazon is like this) G17 with SF 300U Quote HistoryOriginally Posted By WhiskersTheCat: Originally Posted By YaBoyKGTho: I have a safariland 6354DO on my esstac belt. It fits my RMR'd Glock 19 G4 with a TLR1 on it. Originally Posted By dj1975232: Safariland 6390RDS on my Esstac belt with a UBL and QLS. Any go to websites for these? Looks like there's deals to be had by not ordering direct from Safariland, but many websites say "with light" which isn't really helpful being as we all know there's multiple types. (Especially Amazon is like this) G17 with SF 300U I'm using a M&P9 with RMR. I waited and looked on EE, but none popped up so I ended up biting the bullet and ordered direct from Safariland. It took a month or so but I got exactly what I wanted. If you are using a G17 you're better off as I see them on the EE more frequently. |
|
|
|
|
Posted: 5/21/2020 6:35:54 PM EDT
[#40]
Quote HistoryOriginally Posted By dj1975232: I'm using a M&P9 with RMR. I waited and looked on EE, but none popped up so I ended up biting the bullet and ordered direct from Safariland. It took a month or so but I got exactly what I wanted. If you are using a G17 you're better off as I see them on the EE more frequently. Quote HistoryOriginally Posted By dj1975232: Originally Posted By WhiskersTheCat: Originally Posted By YaBoyKGTho: I have a safariland 6354DO on my esstac belt. It fits my RMR'd Glock 19 G4 with a TLR1 on it. Originally Posted By dj1975232: Safariland 6390RDS on my Esstac belt with a UBL and QLS. Any go to websites for these? Looks like there's deals to be had by not ordering direct from Safariland, but many websites say "with light" which isn't really helpful being as we all know there's multiple types. (Especially Amazon is like this) G17 with SF 300U I'm using a M&P9 with RMR. I waited and looked on EE, but none popped up so I ended up biting the bullet and ordered direct from Safariland. It took a month or so but I got exactly what I wanted. If you are using a G17 you're better off as I see them on the EE more frequently. I got this guy from Safariland 
|
|
|
|
|
Posted: 5/21/2020 8:27:45 PM EDT
[#41]
For non RDS the 7 series are great holsters. I have one for a VP9. Can't go wrong withe the ALS system. One addition that I've done, while not necessary but I now have on all my ALS holsters, is the Nub Mod. I highly recommend it.
|
|
|
|
|
Posted: 5/21/2020 8:46:22 PM EDT
[#42]
Quote HistoryOriginally Posted By WhiskersTheCat: Any go to websites for these? Looks like there's deals to be had by not ordering direct from Safariland, but many websites say "with light" which isn't really helpful being as we all know there's multiple types. (Especially Amazon is like this) G17 with SF 300U Quote HistoryOriginally Posted By WhiskersTheCat: Originally Posted By YaBoyKGTho: I have a safariland 6354DO on my esstac belt. It fits my RMR'd Glock 19 G4 with a TLR1 on it. Originally Posted By dj1975232: Safariland 6390RDS on my Esstac belt with a UBL and QLS. Any go to websites for these? Looks like there's deals to be had by not ordering direct from Safariland, but many websites say "with light" which isn't really helpful being as we all know there's multiple types. (Especially Amazon is like this) G17 with SF 300U Optactical |
|
|
|
|
Posted: 5/22/2020 9:24:49 AM EDT
[#43]
Quote HistoryOriginally Posted By SurtrsFire: One ifak is cool...2 is more cooler https://www.AR15.Com/media/mediaFiles/453332/20200517_175316_jpg-1425861.JPG @SurtrsFire Why two? |
|
|
|
|
Posted: 5/22/2020 10:27:02 AM EDT
[#44]
Quote HistoryOriginally Posted By sconnieVLP: @SurtrsFire Why two? Micro kit was just a little too small for my liking and I had extra room and the HSGI pouch was laying around. So far its working pretty good. Idk if I want to spend the money to consolidate down to just one pouch or not since this doesn't seem like its gonna get me killed in the streets yet. |
|
|
|
|
Posted: 5/22/2020 11:01:00 AM EDT
[#45]
Quote HistoryOriginally Posted By SurtrsFire: Micro kit was just a little too small for my liking and I had extra room and the HSGI pouch was laying around. So far its working pretty good. Idk if I want to spend the money to consolidate down to just one pouch or not since this doesn't seem like its gonna get me killed in the streets yet. Let me pose it this way. What is in what pouch? How would I, the guy in the next shooting bay over, know what to grab in case you got an extra hole in you and I needed to fix it. Im not saying youre wrong, just posing a critical thinking exercise. |
|
|
|
|
Posted: 5/22/2020 4:13:09 PM EDT
[#46]
Quote HistoryOriginally Posted By stoner01: Let me pose it this way. What is in what pouch? How would I, the guy in the next shooting bay over, know what to grab in case you got an extra hole in you and I needed to fix it. Im not saying youre wrong, just posing a critical thinking exercise. They both have pretty much the same stuff in them except the hsgi has the shears and an extra tourniquet on the outside. Either one you grab would do the job. |
|
|
|
|
Posted: 5/22/2020 6:02:31 PM EDT
[#47]
I received the Tyr belt system today. I'm a fan. Next figuring out the configuration.
 Attached File Attached File |
|
|
|
|
Posted: 5/26/2020 12:22:39 PM EDT
[#48]
|
|
|
|
|
Posted: 5/27/2020 10:31:58 PM EDT
[#49]
|
|
|
|
|
Posted: 5/28/2020 10:25:37 AM EDT
[#50]
Quote HistoryOriginally Posted By AZ2A: Just need to replace my antiquated med kit and get something that I can tear off. https://www.AR15.Com/media/mediaFiles/482038/PSX_20200527_191040_jpg-1435514.JPG How does the AUG suppress? Did you manage to get the suppressor gas plug? |
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
Attached File
Attached File