User Panel
Posted: 3/16/2024 5:01:49 PM EDT
Freinds, did a larger batch than normal of 9mm and my "green" media separator displeased me.
What's the best quality pin/media separator bucket spinner thinger? Lid doesn't fall on the floor when opened. Basket and trunion assembly doesn't try dumping or isn't flimsy. Has a pour lipp for dumping the nasty water out. Bonus for a drain located a ways up from the bottom. What are y'all using? |
|
... .-.. .- ...- .- / ..- -.- .-. .- .. -. .
- .... . / --- -. .-.. -.-- / --. --- --- -.. / --- .-. -.-. / .. ... / .- / -.. . .- -.. / --- .-. -.-. |
[#1]
Dillon.
|
|
|
[#2]
I use a Lyman. Although it works well, I don't think it fits your requirements.
Sorry I couldn't help. |
|
Please help St Jude children's hospital.
|
[Last Edit: stgdz]
[#3]
I just tilt the fart until pins start to fall out and then empty the rest into a 5 gallon bucket.
Shake it up and down for 30 seconds, grab pins with magnet and dump old water. I repeat this cycle a few times till I can get most of the suds out and then dump cases on a towel in the driveway. Sweep a magnet and grab pins. Agitate a few more times and grab the rest of the pins. Seems to work faster than panning for pins. |
|
|
[#4]
I have a Thumlers Tumbler modelB.
No fart for me. |
|
... .-.. .- ...- .- / ..- -.- .-. .- .. -. .
- .... . / --- -. .-.. -.-- / --. --- --- -.. / --- .-. -.-. / .. ... / .- / -.. . .- -.. / --- .-. -.-. |
[#5]
I use the green media separator with these:
Lyman dual sifter Just dump the wet brass and pins into the sifter. Brass stays in the top tray, pins in the bottom tray. I then dump the brass into the green top and rinse with water. The green top works great as a wash basin .I then dump it back into the sifter. Next the brass gets dumped into the green media separator to remove any remaining pins. No additional water is needed. dry your brass as usual. All pins will stay in the sifter until needed again. |
|
|
[#6]
|
|
... .-.. .- ...- .- / ..- -.- .-. .- .. -. .
- .... . / --- -. .-.. -.-- / --. --- --- -.. / --- .-. -.-. / .. ... / .- / -.. . .- -.. / --- .-. -.-. |
[#7]
|
|
derp...
|
[#8]
So I'm thinking about that Dillon one and, they have to source the tub on the bottom from somewhere don't they?
I just did as much 40 brass as would fit in the green separator and I am shocked it didn't bust. Also, I should have searched because I am not the only one that's ever asked this. But I am also interested in what everyone else does. |
|
... .-.. .- ...- .- / ..- -.- .-. .- .. -. .
- .... . / --- -. .-.. -.-- / --. --- --- -.. / --- .-. -.-. / .. ... / .- / -.. . .- -.. / --- .-. -.-. |
[Last Edit: bm3]
[#9]
Originally Posted By meistermash: Doesn't appear to have a top? Any issues with splashing? Looks moar sturdy other than the top cover thing. View Quote View All Quotes View All Quotes Originally Posted By meistermash: Originally Posted By bm3: Dillon. Doesn't appear to have a top? Any issues with splashing? Looks moar sturdy other than the top cover thing. No issues with splashing for me. |
|
|
[#10]
I really like my Frankford Aresnal separator.
It has a pour section on one corner that has a little screen for catching media. The lid pulls double duty as a pour tray and has a larger screen in the middle for initial media catching on your first pour. I've only used that feature a few times. Frankford Arsenal Wet/Dry Media Separator I've only used mine about 20 times, but it seems well built and should hold up over the years. It appears to be a smoking price on Amazon, if you like to shop there. https://www.amazon.com/Frankford-Arsenal-Separator-Perforated-Reloading/dp/B01B6S8JUC |
|
|
[#11]
Originally Posted By savagemann: I really like my Frankford Aresnal separator. It has a pour section on one corner that has a little screen for catching media. The lid pulls double duty as a pour tray and has a larger screen in the middle for initial media catching on your first pour. I've only used that feature a few times. Frankford Arsenal Wet/Dry Media Separator I've only used mine about 20 times, but it seems well built and should hold up over the years. It appears to be a smoking price on Amazon, if you like to shop there. https://www.amazon.com/Frankford-Arsenal-Separator-Perforated-Reloading/dp/B01B6S8JUC View Quote I have this one too. It’s what I use exclusively for wet tumbling media, it’s excellent for that job. I use the Dillon for dry media separation. |
|
derp...
|
[#12]
Originally Posted By savagemann: I really like my Frankford Aresnal separator. It has a pour section on one corner that has a little screen for catching media. The lid pulls double duty as a pour tray and has a larger screen in the middle for initial media catching on your first pour. I've only used that feature a few times. Frankford Arsenal Wet/Dry Media Separator I've only used mine about 20 times, but it seems well built and should hold up over the years. It appears to be a smoking price on Amazon, if you like to shop there. https://www.amazon.com/Frankford-Arsenal-Separator-Perforated-Reloading/dp/B01B6S8JUC View Quote I've been using a different version of that for a long time and it works pretty good for wet but I never tried it for dry. |
|
FTFTWFMF
|
[#13]
|
|
|
[#14]
That's the smaller dillon I think.
Ehh I don't know but I'm going try the cheapy from the Amazon link. Thanks for the link. |
|
... .-.. .- ...- .- / ..- -.- .-. .- .. -. .
- .... . / --- -. .-.. -.-- / --. --- --- -.. / --- .-. -.-. / .. ... / .- / -.. . .- -.. / --- .-. -.-. |
[#15]
I've been using the "Green" media separator for several years and it works for me just fine. I rinse my brass a couple of times before I toss it into separator. Than change water a second time, than into a Lyman shell dryer.
|
|
|
[#16]
Tier 1? $120 Dillon??
My colanders (one for dry and one for wet) and bucket has been doing great for over a decade... |
|
|
[#17]
Originally Posted By Trollslayer: Is this the Dillon separator to which several of you have referred? https://www.dillonprecision.com/media/catalog/product/2/1/21045_1.jpg?optimize=high&bg-color=255,255,255&fit=bounds&height=798&width=798&canvas=798:798 It works great for dry media, will it do so for wet cleaning with pins? View Quote That is the small Dillon $99. The large is twice the size $135. I have the small and it's a tank. A couple of spins and I'm done. I also have an FA and an RCBS both feel very cheap when spinning either dry or wet. I don't know if the metal parts on the Dillon will rust or not as I only use it for dry media. I use the FA or RCBS when I wet tumble. |
|
|
Global Warming Hoax Skeptic before it was cool
WA, USA
|
[#18]
Any dry media separator with a lid will work fine.
I use my Midway one I got in 1997 for wet and dry media separation. I have the small Dillon pictured above, but find I dislike the bar down the middle. I use mine only when shinning up 22 cal bullets (seconds) I get at AR. It's the only separator that will catch 22 cal bullets, the other baskets, the 22 cal bullets fall through the slots. |
Selling agent for Algores carbon credit scam.
Shooting and Reloading, one hobby feeds the other. |
[#19]
Originally Posted By ZA206: This… the Dillon one is awesome, and I’ve owned/broken/gave away at least three other brands and they were garbage compared to the Dillon. View Quote I'll second the Dillon. Owned it for 15 years before wet tumbling was a thing. I was worried the metal parts would rust but they are good to go. |
|
|
[#20]
I do use a FA colander type that fits in a 5gal bucket.
After I spin the pins out I dump the brass in it. It's just for holding the brass and letting water by. After I wash the pins out of the drum, I use it to pour the brass back into the drum so I can rinse it. Then I dump it back into the colander to drain water. The idea is to not handle the brass or pins. |
|
... .-.. .- ...- .- / ..- -.- .-. .- .. -. .
- .... . / --- -. .-.. -.-- / --. --- --- -.. / --- .-. -.-. / .. ... / .- / -.. . .- -.. / --- .-. -.-. |
[#21]
|
|
|
[#22]
Originally Posted By Trollslayer: Is this the Dillon separator to which several of you have referred? https://www.dillonprecision.com/media/catalog/product/2/1/21045_1.jpg?optimize=high&bg-color=255,255,255&fit=bounds&height=798&width=798&canvas=798:798 It works great for dry media, will it do so for wet cleaning with pins? View Quote It works excellent for SSTL media. Fill the tub about 1/2-2/3 full of water, add brass to the sifter, close it up. Spin it a 12 times both directions. Done. I think I might see a pin every now and then but I catch them when I process brass. |
|
|
[#23]
Originally Posted By meistermash: I do use a FA colander type that fits in a 5gal bucket. After I spin the pins out I dump the brass in it. It's just for holding the brass and letting water by. After I wash the pins out of the drum, I use it to pour the brass back into the drum so I can rinse it. Then I dump it back into the colander to drain water. The idea is to not handle the brass or pins. View Quote That is exactly what I use, and it works fine for pistol brass like 9mm. But I use the FA tumbler, so I think in terms of that for quantity… My process: First- dump out the dirty water from the tumbler, rinse, and so on. Next- put the collander type separator in a 5 or 3 gallon bucket, put the bucket in the garage sink. Then pour about 1/4 of the tumbler full into the separator. Shake the hell out of it, spray down the brass with the faucet sprayer, making sure to hit the separator sides (you are washing the pins into the bucket). Repeat that for a total of 2 or 3 shake and rinse cycles. Pour the brass into an aluminum pan for oven drying, start over with the next 1/4 batch. Works absolutely great for pistol brass. (Not as great for rifle, I have to handle that to dump out the pins and water, rinse them out about 40 at a time.) Less steps than what you are doing. I don’t own a spinning separator (yet). Only part I don’t like is that shaking the brass around can be loud… Maybe give it a try before buying a new separator? It separates the pins and rinses off the brass in on stage basically… |
|
a loaded gun won’t set you free, so they say…
|
[#24]
Ok my friends, got the FA separator today.
I haven't used it yet but there are several things about it that seem much better. I'll have to bathe some 45 brass i have been procrastinating about sorting and try it out. |
|
... .-.. .- ...- .- / ..- -.- .-. .- .. -. .
- .... . / --- -. .-.. -.-- / --. --- --- -.. / --- .-. -.-. / .. ... / .- / -.. . .- -.. / --- .-. -.-. |
[Last Edit: Grumple]
[#25]
If you're using pins, this is a must in my opinion.
Makes a fast cleanup and collection of ss pins. Frankfort Arsenal magnet. https://ads.midwayusa.com/product/1012716058?pid=375973&utm_medium=shopping&utm_source=google&utm_campaign=Reloading+-+Metallic+Reloading+Equipment&utm_content=375973&gad_source=1&gclid=CjwKCAjwh4-wBhB3EiwAeJsppDEkVvWT0yMlNrJh5909AkCVUmMvOsfTPh0sjQTtdEtFcGkXLXv0ZhoC6awQAvD_BwE |
|
|
[#26]
I’ve been using the Hornady separator for a couple years now,it works great for moderate amounts of brass. No pour spout,but it’s rectangular,so the corners work for that. I use it for wet and dry,no issues,and is considerably easier than the collanders I was using.
|
|
|
Global Warming Hoax Skeptic before it was cool
WA, USA
|
[#27]
Originally Posted By Grumple: If you're using pins, this is a must in my opinion. Makes a fast cleanup and collection of ss pins. Frankfort Arsenal magnet. https://ads.midwayusa.com/product/1012716058?pid=375973&utm_medium=shopping&utm_source=google&utm_campaign=Reloading+-+Metallic+Reloading+Equipment&utm_content=375973&gad_source=1&gclid=CjwKCAjwh4-wBhB3EiwAeJsppDEkVvWT0yMlNrJh5909AkCVUmMvOsfTPh0sjQTtdEtFcGkXLXv0ZhoC6awQAvD_BwE View Quote Use the 2 bucket method I have posted numerous times. |
Selling agent for Algores carbon credit scam.
Shooting and Reloading, one hobby feeds the other. |
[#28]
I have two of the separators from Cabela's. They're awesome.
|
|
|
[#29]
Ok the FA unit is much better.
The top lid has a screen in it so you can use that. Still have to be slow and gentle pouring the brass and pins into the cage. Agitation, slow and steady or it will fling a few pins out where the two halves meet. The roots of the handles catch on the sides however if you don't watch. I may snip the corners off the trunion to help with this. The handles just snap into the bowl from the sides but are still better than the half nubs the green one has. It's 50% better than the green one. I only use a magnet to corral up the occasional pin. There is usually a couple here n there that escape. |
|
... .-.. .- ...- .- / ..- -.- .-. .- .. -. .
- .... . / --- -. .-.. -.-- / --. --- --- -.. / --- .-. -.-. / .. ... / .- / -.. . .- -.. / --- .-. -.-. |
Global Warming Hoax Skeptic before it was cool
WA, USA
|
[#30]
Magnet used on escaping pins on floor is what I do.
Magnet for separating pins, your doing it wrong/hard way. |
Selling agent for Algores carbon credit scam.
Shooting and Reloading, one hobby feeds the other. |
[#31]
I use the one from Hornady. Works pretty good for separating pins from wet tumbled brass.
|
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.