Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
BCM
User Panel

Site Notices
Posted: 3/19/2023 10:52:58 AM EDT
Hoping for help choosing a can for a .350 legend Bolt rifle.

The Omega 36M is one possibility, but uses their Charlie/Saker mount thread system.
I'm hoping to find a 1.375 x 24 compatible option.

Even a 5/8-24 direct thread (only) would be fine.
Would like something less bulky than the Hybrid 46.

Any suggestions are greatly appreciated.
Thanks
Link Posted: 3/19/2023 11:06:17 AM EDT
[#1]
Rugged Alaskan360
Link Posted: 3/19/2023 11:22:51 AM EDT
[#2]
YHM R9 or Rex MG7-358 are a nice inexpensive smaller can. Wolfman or YHM Nitro N2O gives you two length/suppression levels. I have no idea how any of those sound in that cartridge. I didn’t check barrel length/cartridge restrictions.  The other concern is depth of blast chamber if you need to use a longer muzzle device. Just some options to check out.
Link Posted: 3/19/2023 11:26:54 AM EDT
[#3]
Discussion ForumsJump to Quoted PostQuote History
Quoted:
Rugged Alaskan360
View Quote

This, but the Ti version. 6.6oz with direct thread adapter.
Link Posted: 3/19/2023 2:34:49 PM EDT
[#4]
For the money, a YHM R9 is pretty hard to beat.  

Link Posted: 3/19/2023 7:04:16 PM EDT
[#5]
I have a Bushwhacker 36. It does good on my 350 legend.  I need to get some subsonic ammo to test that. With the super sonic it’s just above what I would be willing to shoot without ear pro.

Being a universal it has the threading that you want and can be used with anything that will fit thru it. My 9mm and the 10/22 are comfortable with out ear pro. The 5.56 and 350 legend are just above comfortable but are noticeably quieter.

I’m happy with it so far and would buy again.

ETA: I see Griffen has a rebate going this month.
Link Posted: 3/19/2023 9:20:11 PM EDT
[#6]
I’ve been running a Nitro N20 on mine and it sounds great. The R2 is also a good option if you want to save some money.

I haven’t shot an Alaskan on a 350 but it’s another good option.
Link Posted: 3/19/2023 11:40:05 PM EDT
[#7]
Bolt gun?
Link Posted: 3/20/2023 10:29:40 AM EDT
[#8]
Yes, this is for a 16" Bolt Rifle in .350 Legend.  (Corrected: I had wrongly said 6.5 Grendel.  Brain not engaged)

Updated to add that. Thanks.

First time out yesterday with the new Howa. Cold and windy.  
3 shots (unsuppressed) touching at 100yds.  3 shots inside 1-1/2 at 200.  
My loads. Happy!

And, Thanks to everyone for their helpful replies!
Link Posted: 3/22/2023 2:52:38 AM EDT
[#9]
on the cheap side is the JK 155 9mm.  It is rated for a 350 Legend and a 16" barrel.  Run wet, it should suppress ok for a few shots.  That said, ok is about all you can only hope for if you are supersonic.
Link Posted: 3/22/2023 9:47:00 AM EDT
[#10]
Discussion ForumsJump to Quoted PostQuote History
Quoted:
Yes, this is for a 16" Bolt Rifle in 6.5 Grendel.
View Quote


So is this for a 350 Legend or a 6.5 Grendel, or both?

A 6.5 Grendel opens you up to all the 30 cal options. I would run a 30 cal on it, unless you need/want a single can to do both calibers.
Link Posted: 3/22/2023 10:22:37 AM EDT
[#11]
Discussion ForumsJump to Quoted PostQuote History
Quoted:


So is this for a 350 Legend or a 6.5 Grendel, or both?

A 6.5 Grendel opens you up to all the 30 cal options. I would run a 30 cal on it, unless you need/want a single can to do both calibers.
View Quote


Yes, this is for .350 Legend.  

Thank You for catching that.  

I load both, already have 6.5 and .30 cans, still need one for .350 Legend, and should not post before coffee.
Link Posted: 3/23/2023 11:00:35 AM EDT
[#12]
I have a wolf man in jail and it’s rated for 350 Legend as per the spec sheet.

I also have an octane 45 can so….
I emailed Silencerco and asked if the Octane45 can handle subsonic 350 legend out of a 16” barrel. Here is their response


Hello,
That suppressor can only shoot subsonic ammo with that caliber with a barrel that is 16 inches or longer.

Thanks.
Top Top