Armory Sponsor
Sig MCX/MPX Photo Thread (Page 45 of 46)
|
Originally Posted By OceanAteCali: what recommendations so people have for bridging the top of the handguard for the MPX to remove any play and possibly mount a laser? I used to use a metal mod button. Depending on how you grip the gun, you could also use a metal sling mount provided it's long enough. Even the plastic mod buttons will suffice at adding rigidity. I don't expect my lasers to hold zero on a PCC at 400 yards. :) |
Mike_Golf says: "You're not an ethical hunter and likely an asshole to boot."
Trying to organize ammo in the garage cabinet and got bored so I thought I'd do a family photo of my Sig rifles... I bought a SURG kit but it hasn't even shipped from EuroOptic yet, I need to contact them and figure out what's going on. |
When faced with crisis, the man of character falls back on himself.
" />
Joined:
Jul 2023
Posts:
1
EE: 0% (0)
CAN
What have the Romans ever done for us?
Joined:
Jul 2008
Posts:
43162
EE: 100% (212)
TN, USA
|
Originally Posted By velken: Decided to do something a little different with the Regulator. https://i.ibb.co/0ycLVVX7/IMG-8233.jpg camo job is supreme tits 
|
Panem et Circenses
I have also learned from experience that the greater part of our happiness or misery depends upon our dispositions, and not upon our circumstances.
I have also learned from experience that the greater part of our happiness or misery depends upon our dispositions, and not upon our circumstances.
Joined:
Feb 2025
Posts:
2
EE: 0% (0)
VA, USA
|
Originally Posted By J11B: CSAW | LVAW https://i.imgur.com/rPA2mW3.jpeg Getting a Lancer Carbon rail for the MCX later this week. Gave up looking for a SRD762ti, so I'll stick with the SLH for now.  Sick setups bro. |
Joined:
Feb 2025
Posts:
3
EE: 0% (0)
VA, USA
never underestimate the stupidity of other people
Joined:
Oct 2016
Posts:
21417
EE: 100% (29)
GA, USA
|
Originally Posted By J11B: Thanks, man! I just installed the lancer rail, but I honestly might switch back to the tacops rails. https://i.imgur.com/QFaygWz.jpeg @J11B would you be able to measure the ID of that? I'm also curious if it works on the OG rattler. 
|
"every exercise is a low back exercise if you do it wrong enough"
@MacManus
@MacManus
Joined:
Feb 2025
Posts:
4
EE: 0% (0)
VA, USA
|
Attached File Attached File Rebuilding her. Had to part it out a while back. But still a registered SBR. Just got a ILWT 4.25" on EE. Just did a quick function test both suppressed and unsuppressed and definitely had the grinning at the end haha. Thinking I'm going to go with an A3 triangle stock just for some variety and the price. I got a coyote B5 grip but it puts my hand a bit to close to the muzzle for comfort so I think I'm going to have to find something different. I'd like to eventually get it cerakoted in RAL 8000 but that will be once I figure out all the parts. |
Member
Joined:
Oct 2022
Posts:
3241
EE: 100% (85)
NC, USA
|
Attached File Gen 1 love. Absolute grail gun for me and made it a reality! But i just can't decide if I want an MCX. I absolutely love the MPX but I'm nervous that picking up an MCX will be regretted in the future. And if I do get one should I opt for a second hand Virtus or previous gen or go with an LT? |
|
Originally Posted By StillGonnaSendIt: https://www.ar15.com/media/mediaFiles/572575/1000060657_jpg-3513099.JPGGen 1 love. Absolute grail gun for me and made it a reality! But i just can't decide if I want an MCX. I absolutely love the MPX but I'm nervous that picking up an MCX will be regretted in the future. And if I do get one should I opt for a second hand Virtus or previous gen or go with an LT? I would go Virtus or Spear ... not that there is anything wrong with the legacy models ... but there is better compatibility between the Virtus and Spear LT ... |
Member
Joined:
Oct 2022
Posts:
3246
EE: 100% (85)
NC, USA
|
Originally Posted By thehun06: I would go Virtus or Spear ... not that there is anything wrong with the legacy models ... but there is better compatibility between the Virtus and Spear LT ... If going Virtus what's a good price point? Anything i should watch out for? |
|
Originally Posted By StillGonnaSendIt: If going Virtus what's a good price point? Anything i should watch out for? Originally Posted By StillGonnaSendIt: Originally Posted By thehun06: I would go Virtus or Spear ... not that there is anything wrong with the legacy models ... but there is better compatibility between the Virtus and Spear LT ... If going Virtus what's a good price point? Anything i should watch out for? $1500-1700 … phosphate outer coated barrels are chrome lined vs nitride. I have a rare 16” variant of that … so if you find one … might consider it. The chrome-lined variants will demand a higher price. |
|
My newly acquired MCX Spear LT Pistol. I need a light and some BUIS. Thinking Scarlarworks flip ups if they even come back in stock. Attached File |
Gonads & Strife
|
Attached File 1. Custom Shop 11.5" MCX LT with Surefire RC3, Unity mount w/T2, SCALAR Works front sight, SF Pro, large Sig charging handle, Tailhook brace. One of my favorite guns. 2. Sig P322 with Rugged Oculus - Just for fun, cycles subsonics. 3. Sig Rattler LT 6.75" barrel in 300blk, Surefire SOCOM 300 SPS suppressor, EOTECH EXPS2 on UNITY riser, Tailhook brace. 4. PIC because someone else did it above, 10/22 Pistol with Enoch Industries Arcane Chassis, Trijicon RDS, and Banish 30 titanium suppressor for fun. |
|
Originally Posted By TROB: First time using pick N pluck foam. That stuff sucks. I still cut it like normal foam and used plastic-dip after, so it turned out alright. https://i.imgur.com/JRPZ7HC.jpeg https://i.imgur.com/OwLdsim.jpeg Hope it works for you but pick and pluck has never been the answer me. The last one I attempted was for a Pelican Air 1705 for my daughter's Geissele 11.5. The thing fell apart before I got half way done. It won't work in every case, but the Magpul case inserts worked pretty well for me. Here is a link to someones set up. ------> Magpul Inserts The one I set up was neater. It works better than you might think. I used some E6000 adhesive to make a couple of things permanent, but the beauty of this is that you can alter the interior pretty well. For instance, I made a space to add a S&W Body Guard II pistol in the case because I was not transporting magazines. After I arrived we removed the pistol and made space for magazines. You can cut the grid to the case size if you pick a kit that is about right sized. It's coated Styrofoam (heavy Styrofoam). It cuts easily with a plain hacksaw blade. Once you have a grid you just plug the small segments into the grid to make your cutout. If this doesn't work for you Cabela's carries extra case foam for one of their cases, you cut to fit. |
|
Originally Posted By doolz: Thanks. I was thinking the same thing but I'm toying with the idea that because the Scalarworks is quick detach, if the optic ever goes down... Also figuring out the light position and keeping the surefire switch or going to a Modbutton for space saving. Would also love a laser  Scalar Works makes some really nice compact irons now. In standard height and 1.93" height. I've got three sets and have been especially happy with their compact size and ease of adjustment. |
|
Originally Posted By aftac: Question for ya'll, how is the adaptor on to turn my Regulator to a "MCX"? it would add another gun to the line if need be. Not sure I understand the question. But I think you could simply use an AR lower (with Sig converter if you wish). That is a question for SIg. |
Test signiture
|
Stand in handguard and suppressor until I get my LVAW ones Attached File |
Joined:
Feb 2025
Posts:
6
EE: 0% (0)
VA, USA
|
Originally Posted By J11B: Spear LT and Tacops fit nicely in a Pelican 1595 https://i.imgur.com/rm8QS3f |
No good will come from me a fightin' your war....-John Carter
|
Originally Posted By J11B: Spear LT and Tacops fit nicely in a Pelican 1595 https://i.imgur.com/rm8QS3f Here you go. Pretty neat setup! Attached File |
|
OG rattler upper on an SBR lower. VIR II for short range white/ir light. It's a backpack gun. The Rattler lower is still a pistol. Attached File |
|
Originally Posted By 4runnagunna: So this is all I need to run the Lancer Carbon Fiber Legacy Handguard one of my Virtus Rifles?! Originally Posted By 4runnagunna: Originally Posted By J11B: Pretty sure this is all you would need: https://www.virtuous-concepts.com/product-page/mcx-xl-xtn So this is all I need to run the Lancer Carbon Fiber Legacy Handguard one of my Virtus Rifles?! Yes, they have a few different types for different combinations. |
|
There are some amazing looking rifles in here. Here is a little mocked up work in progress. Still waiting on a few items to arrive. Attached File |
never underestimate the stupidity of other people
Joined:
Oct 2016
Posts:
22156
EE: 100% (29)
GA, USA
|
Originally Posted By Andrewc_c: There are some amazing looking rifles in here. Here is a little mocked up work in progress. Still waiting on a few items to arrive. https://www.ar15.com/media/mediaFiles/78485/IMG_9311_jpeg-3690864.JPG @Andrewc_c Looks awesome, but real question... If you have the top rail real estate, why the raised laser? |
"every exercise is a low back exercise if you do it wrong enough"
@MacManus
@MacManus
Joined:
Jan 2026
Posts:
3
EE: 0% (0)
PA, USA
|
Hey y'all! I know that this is a long shot, but does anyone happen to have Gen 1 MPX FCG with the original trigger bridge that they would be willing to sell? I have been trying to find one for the longest time, but have not had any luck. :/ I am getting quite tired of destroying disconnectors due to trigger slap with my standard mil-spec triggers, but Sig CS has not been helpful with finding a replacement as they do not have any old stock laying around to be sold. Any leads on where I can find one would be awesome! This would be highly appreciated! Thank you all for your help! 
|
|
Built an MCX upper for my ever evolving 300 blackout. Tacops upper but with a 9" barrel.  Once I got it all assembled I didn't really like the girth or the look of the Tacops SD rail. Sent the barrel to adco to get chopped to 6.75" and sold the Tacops rail and bought the Spear LT SD handguard. I must be bad at google but I can't really find an MCX SD rail ID thread or posts about the various SD rails for MCX's and what their ID's are. Is the smallest ID one the lancer? Then the biggest the Virtus SD rail? |
|
My 11.5 SBR. Attached File |
"I am gonna laugh my ass off looking out the air vent of the box car watching some of you shot in the head in a ditch when you finally realize it's time to resist." stolen from RR_broccoli
|
Originally Posted By Dolor: https://www.ar15.com/media/mediaFiles/418820/PXL_20250322_224035081_jpg-3497497.JPG https://www.ar15.com/media/mediaFiles/418820/PXL_20250322_224125840_jpg-3497498.JPG Rebuilding her. Had to part it out a while back. But still a registered SBR. Just got a ILWT 4.25" on EE. Just did a quick function test both suppressed and unsuppressed and definitely had the grinning at the end haha. Thinking I'm going to go with an A3 triangle stock just for some variety and the price. I got a coyote B5 grip but it puts my hand a bit to close to the muzzle for comfort so I think I'm going to have to find something different. I'd like to eventually get it cerakoted in RAL 8000 but that will be once I figure out all the parts. As someone that shoots a full auto mac10 you learn a common issue with super short barrels and grips right at them, is the potential to shoot your support hand or fingers when opening your grip while shooting or having a malfunction of the grip where it can unmount or break off. That being said I went with an a3 tactical vfg that has a hand stop built into the front also made specially for the mpx Attached File |
Joined:
Jul 2023
Posts:
3
EE: 0% (0)
CAN
Sig MCX/MPX Photo Thread (Page 45 of 46)
Armory Sponsor