Armory Sponsor
Sig MCX/MPX Photo Thread (Page 43 of 46)
|
Originally Posted By doolz: https://i.imgur.com/vOGiSlC.png Trying to figure out whether or not to run either offset irons or an offset red dot. My vote is neither. Looks fine as is. |
Member
Joined:
Feb 2022
Posts:
1234
EE: 100% (162)
USA
|
Originally Posted By RRAR15: My vote is neither. Looks fine as is. Thanks. I was thinking the same thing but I'm toying with the idea that because the Scalarworks is quick detach, if the optic ever goes down... Also figuring out the light position and keeping the surefire switch or going to a Modbutton for space saving. Would also love a laser 
|
|
Originally Posted By doolz: Thanks. I was thinking the same thing but I'm toying with the idea that because the Scalarworks is quick detach, if the optic ever goes down... Also figuring out the light position and keeping the surefire switch or going to a Modbutton for space saving. Would also love a laser If you’re paring it with NV then it’s a different story. Then I’d recommend a 12:00 mounted red dot. |
Member
Joined:
Feb 2022
Posts:
1235
EE: 100% (162)
USA
Member
Joined:
Feb 2022
Posts:
1236
EE: 100% (162)
USA
Member
Joined:
Oct 2022
Posts:
1176
EE: 100% (85)
NC, USA
|
Originally Posted By StillGonnaSendIt: anyone have any experience with the B&T specific MPX suppressor or the MIL-SRD9-MPX sku from sig? I can find the SRD9 that has not the 13 and 1/2 pistons but a local dealer has old stock of the “MPX” specific sku. I've got the MIL-SRD9-MPX on my 4.5" but unfortunately I haven't really got to test it yet. |
Member
Joined:
Oct 2022
Posts:
1189
EE: 100% (85)
NC, USA
|
Originally Posted By brazos609: I've got the MIL-SRD9-MPX on my 4.5" but unfortunately I haven't really got to test it yet. Is it any different than the SRD9? Is it specifically threaded and designed for the taper? Or is it just a piston and fixed spacer? @brazos609 Also pics? |
|
Bit of a Frankenstein. AR lower, legacy upper and Lancer CF handguard, Virtus/TacOps 6.75” barrel and BCG/Op Rod assembly. Attached File |
|
Originally Posted By WUPHF: Bit of a Frankenstein. AR lower, legacy upper and Lancer CF handguard, Virtus/TacOps 6.75” barrel and BCG/Op Rod assembly. https://www.ar15.com/media/mediaFiles/294984/3FACC1DA-245D-46B4-B764-27D87712581F_jpe-2961872.JPG Bit of Beautiful! Attached File Cp |
President’s Hundred Rifle / 2022
U.S. Army Distinguished Pistol Shot 2015
U.S. Army Distinguished Pistol Shot 2015
Member
Joined:
Feb 2022
Posts:
1285
EE: 100% (162)
USA
|
Originally Posted By Lmc10278: https://imgdump5.novarata.net/s070k1.png CAG PSD in Israel, anyone know more details on this upper? Part of me wants to say it’s a Spear LT but the handguard looks very similar to the MCX SURG slim handguard. Can appears to be an Slx compact QD from what I can tell. It’s a special CAG deal. 10.5” barrel (unavailable) with titanium bits (unavailable) and a special can that is probably not available as well. 
|
Not a Tennessee Squire
|
Originally Posted By Subpar: It’s a special CAG deal. 10.5” barrel (unavailable) with titanium bits (unavailable) and a special can that is probably not available as well. https://www.ar15.com/media/mediaFiles/147863/FBFE5405-BD55-4990-9F88-5C0BC4233D33-2997608.jpg Go figure, appreciate the response though! |
|
Originally Posted By Subpar: It’s a special CAG deal. 10.5” barrel (unavailable) with titanium bits (unavailable) and a special can that is probably not available as well. https://www.ar15.com/media/mediaFiles/147863/FBFE5405-BD55-4990-9F88-5C0BC4233D33-2997608.jpg Originally Posted By Subpar: Originally Posted By Lmc10278: https://imgdump5.novarata.net/s070k1.png CAG PSD in Israel, anyone know more details on this upper? Part of me wants to say it’s a Spear LT but the handguard looks very similar to the MCX SURG slim handguard. Can appears to be an Slx compact QD from what I can tell. It’s a special CAG deal. 10.5” barrel (unavailable) with titanium bits (unavailable) and a special can that is probably not available as well. https://www.ar15.com/media/mediaFiles/147863/FBFE5405-BD55-4990-9F88-5C0BC4233D33-2997608.jpg Pretty slick. Still need to pick up a SPEAR LT |
"I do what I want" - Abu Hajar
|
The original 6.75 rattler. |
" />
|
Originally Posted By doolz: https://i.imgur.com/vOGiSlC.png Trying to figure out whether or not to run either offset irons or an offset red dot. A few weeks ago I shot a 2 gun challenge match that was rain or shine and oh, it rained. Everybody was struggling with rain on optics, it made visibility through the optics worse than the naked eye while hunting for steel targets against dirt and rock. Really made me appreciate the offsets I have on my rifle, no glass to look through. |
| If anyone is on the hunt for a sig SRD762 Direct Thread can my local FFL has one available that is reasonably priced and brand new. I would scoop it but I can't justify spending more money on my mcx as I was originally going to make an LVAW clone out of it and ALTRD took my money on the last batch of pre orders last year and ran with it on handguard pre orders. Shoot me a PM and I will give the FFL name and phone number. |
|
Originally Posted By Lmc10278: If anyone is on the hunt for a sig SRD762 Direct Thread can my local FFL has one available that is reasonably priced and brand new. I would scoop it but I can't justify spending more money on my mcx as I was originally going to make an LVAW clone out of it and ALTRD took my money on the last batch of pre orders last year and ran with it on handguard pre orders. Shoot me a PM and I will give the FFL name and phone number. You could still do an LVAW clone with a Lancer handguard. |
never underestimate the stupidity of other people
Joined:
Oct 2016
Posts:
19030
EE: 100% (29)
GA, USA
|
Originally Posted By Lenaburg: https://images2.imgbox.com/52/9b/mRt7PsKU_o.jpg Just barely fits in the case. Need to form 1 this. @Lenaburg what case is that? and yeah, if you go with a slim folding stock you'll save a few inches off the ass-end of that thing 
|
"every exercise is a low back exercise if you do it wrong enough"
@MacManus
@MacManus
|
Originally Posted By steviesterno16: @Lenaburg what case is that? and yeah, if you go with a slim folding stock you'll save a few inches off the ass-end of that thing Pelican Air 1525. Internal dims are 20.50 x 11.31 x 6.75. If I take the mag out and have it angled it has more room to fit. |
|
For the LVAWbro’s, RailScales is selling a contract overrun MLOK version of the old LVAW light mount. It’ll have to be modified to work with the ALTRD rails but it’s as close as we’ll get to the correct mount. https://railscales.us/mcx-sd-rail-light-mount/  
|
|
Originally Posted By StealthGuy: For the LVAWbro’s, RailScales is selling a contract overrun MLOK version of the old LVAW light mount. It’ll have to be modified to work with the ALTRD rails but it’s as close as we’ll get to the correct mount. https://railscales.us/mcx-sd-rail-light-mount/ https://i.imgur.com/81PIIFN.jpg https://i.imgur.com/sSxyg8d.png I wonder if the spacing and thread pitch is the same as LWRC (#8-32). LWRCI and Arisaka have some options if thats the case as well. The LWRCi version is a combo pic rail with Scout light slots in the pic rail. Ill measure the CTC on the LWRCi when I get to the house and update. Edit: I measured spacing on LWRCi threaded holes at 1-3/16" https://www.lwrci.com/Offset-Picatinny-Mount-Kit-LWRCI-Modular-Forends_p_54.html |
never underestimate the stupidity of other people
Joined:
Oct 2016
Posts:
19043
EE: 100% (29)
GA, USA
|
Originally Posted By Lenaburg: Pelican Air 1525. Internal dims are 20.50 x 11.31 x 6.75. If I take the mag out and have it angled it has more room to fit. @Lenaburg thanks for that, it looks great! I have a pelican air case for travel that's been across the country a few times now and holds up great. It's just a bit too small if I want to travel locally with my PC, helmet, and rattler. Still haven't figured out the right way to move that stuff all around without being obvious. I should grab just a cheap pink hardside suitcase I guess.
|
"every exercise is a low back exercise if you do it wrong enough"
@MacManus
@MacManus
|
Originally Posted By steviesterno16: @Lenaburg thanks for that, it looks great! I have a pelican air case for travel that's been across the country a few times now and holds up great. It's just a bit too small if I want to travel locally with my PC, helmet, and rattler. Still haven't figured out the right way to move that stuff all around without being obvious. I should grab just a cheap pink hardside suitcase I guess. I use a condition one 45" long trunk. Fits rifle, chest rig, belt, pistol. mags ammo, shoes, coms, jackets. Has wheels too and stays right under 50 lbs. |
|
Where does this one fit in the family? Found it on GB tonight...  https://www.gunbroker.com/item/1028962214 |
|
Originally Posted By red6actual: Where does this one fit in the family? Found it on GB tonight... https://www.ar15.com/media/mediaFiles/19923/mc_x-3087568.jpg https://www.gunbroker.com/item/1028962214 Appears to be a Legacy upper with Keymod handguard on a standard Sig lower receiver with stock adapter (i.e. not an MCX lower) and perhaps a Virtus barrel and muzzle device I believe the 300blk barrel shown is Legacy as well (Non tapered Lug) with Virtus Gas Valve?? |
> Have gun, will travel <
|
Originally Posted By MagnusActual: Appears to be a Legacy upper with Keymod handguard on a standard Sig lower receiver with stock adapter (i.e. not an MCX lower) and perhaps a Virtus barrel and muzzle device I believe the 300blk barrel shown is Legacy as well (Non tapered Lug) with Virtus Gas Valve?? Originally Posted By MagnusActual: Originally Posted By red6actual: Where does this one fit in the family? Found it on GB tonight... https://www.ar15.com/media/mediaFiles/19923/mc_x-3087568.jpg https://www.gunbroker.com/item/1028962214 Appears to be a Legacy upper with Keymod handguard on a standard Sig lower receiver with stock adapter (i.e. not an MCX lower) and perhaps a Virtus barrel and muzzle device I believe the 300blk barrel shown is Legacy as well (Non tapered Lug) with Virtus Gas Valve?? I like it quite a bit, it's thicker than a Legacy. It looks really nice with a 14.5" Virtus barrel. |
Member
Joined:
Feb 2022
Posts:
1368
EE: 100% (162)
USA
|
Originally Posted By MagnusActual: Appears to be a Legacy upper with Keymod handguard on a standard Sig lower receiver with stock adapter (i.e. not an MCX lower) and perhaps a Virtus barrel and muzzle device I believe the 300blk barrel shown is Legacy as well (Non tapered Lug) with Virtus Gas Valve?? Doesn't this qualify as "false advertising" in a sense? It technically isn't an MCX because of the build, but someone who doesn't know what to look for would think they're getting an actual MCX... |
|
Originally Posted By doolz: Doesn't this qualify as "false advertising" in a sense? It technically isn't an MCX because of the build, but someone who doesn't know what to look for would think they're getting an actual MCX... Originally Posted By doolz: Originally Posted By MagnusActual: Appears to be a Legacy upper with Keymod handguard on a standard Sig lower receiver with stock adapter (i.e. not an MCX lower) and perhaps a Virtus barrel and muzzle device I believe the 300blk barrel shown is Legacy as well (Non tapered Lug) with Virtus Gas Valve?? Doesn't this qualify as "false advertising" in a sense? It technically isn't an MCX because of the build, but someone who doesn't know what to look for would think they're getting an actual MCX... SIG sold some MCX setups with the AR15 SIG lower and conversion kit installed, with a MCX upper on top. |
|
Originally Posted By Zerlak: SIG sold some MCX setups with the AR15 SIG lower and conversion kit installed, with a MCX upper on top. Originally Posted By Zerlak: Originally Posted By doolz: Originally Posted By MagnusActual: Appears to be a Legacy upper with Keymod handguard on a standard Sig lower receiver with stock adapter (i.e. not an MCX lower) and perhaps a Virtus barrel and muzzle device I believe the 300blk barrel shown is Legacy as well (Non tapered Lug) with Virtus Gas Valve?? Doesn't this qualify as "false advertising" in a sense? It technically isn't an MCX because of the build, but someone who doesn't know what to look for would think they're getting an actual MCX... SIG sold some MCX setups with the AR15 SIG lower and conversion kit installed, with a MCX upper on top. Interesting. Thanks for the info Someone on Reddit posted an actual part number: pmcx-300b-9b-tfsal-400 Has the conversion M400 lower. Found an old link from Impact Guns ADDL INFO:M400 Lower with Adapter |
> Have gun, will travel <
| https://www.reddit.com/r/SigSauer/comments/154ffje/any_help_in_letting_me_know_if_this_mcx_is/ |
On ne voit bien qu'avec le cœur. L'essentiel est invisible pour les yeux.
|
Originally Posted By red6actual: That upper is looks to be heavier like the Virtus but as long as the original, Gen 2 Legacy perhaps? IIRC, one is a bit more radiused, and one is more angular. I'd have to look at mine again. |
Member
Joined:
Feb 2022
Posts:
1383
EE: 100% (162)
USA
|
Originally Posted By WUPHF: https://www.ar15.com/media/mediaFiles/294984/761C079A-23A0-4196-80EB-139D68C06E7C_jpe-2992785.JPG @WUPHF Did you not like the cantilevered IR laser mount? Curious as I am interested one of those for a Unity mount myself. |
Sig MCX/MPX Photo Thread (Page 43 of 46)
Armory Sponsor