Armory Sponsor
Sig MCX/MPX Photo Thread (Page 38 of 46)
Joined:
Apr 2022
Posts:
1
EE: 0% (0)
OH, USA
|
Does anyone know if the Midwest handguard will cover a Rexsilentium mg7 supressor? I have an mg7 in jail and an MPX waiting on it to be free. Rex says on their website the mg7 is 1.7" and midwest says the handguards are 1.8" but figured I would see if anyone has this combination to confirm the clearances. Thanks |
never underestimate the stupidity of other people
Joined:
Oct 2016
Posts:
14518
EE: 100% (29)
GA, USA
|
Originally Posted By fitchsky: Does anyone know if the Midwest handguard will cover a Rexsilentium mg7 supressor? I have an mg7 in jail and an MPX waiting on it to be free. Rex says on their website the mg7 is 1.7" and midwest says the handguards are 1.8" but figured I would see if anyone has this combination to confirm the clearances. Thanks great timing... I have the same can in jail for the same use. Debating getting a longer rail or just keeping it sticking out the front. Lancer makes some but they are $$$ |
"every exercise is a low back exercise if you do it wrong enough"
@MacManus
@MacManus
|
Originally Posted By northcoastwizard: https://i.imgur.com/IHJkesW.jpg My dept is gonna get rid of our MCXs, shot what will probably be my last rifle qual with this big baby  https://i.imgur.com/8CSSwv7.jpg Not gonna miss cleaning all the hard-to-reach nooks and crannies though. The places I find unburnt powder and carbon buildup kinda surprises me sometimes. Why are they getting rid of them, and how can I buy all of them? |
Member
Joined:
Feb 2022
Posts:
134
EE: 100% (162)
MA, USA
|
Originally Posted By JAG2955: DOE? Why are they getting rid of them, and how can I buy all of them? DOI, a few reasons but mainly that our contract support is ending. I know, not sure where they're going but I'd like to take back my SN if they end up on the open market. I'll be sure to share if they do. |
|
Work in progress Attached File |
I'm not the one REEING, motherfucker! -FCSD2162
Joined:
Feb 2022
Posts:
14
EE: 0% (0)
AL, USA
never underestimate the stupidity of other people
Joined:
Oct 2016
Posts:
14754
EE: 100% (29)
GA, USA
|
Originally Posted By JohnnyUtah427: https://live.staticflickr.com/65535/52043713752_cd9c79a5c3_b.jpg I've said it before and I'll say it again. This is perfection and I'm copying it a good bit for my build.  can is in jail and I can't afford a cool light, but getting closer Attached File |
"every exercise is a low back exercise if you do it wrong enough"
@MacManus
@MacManus
Member
Joined:
Feb 2022
Posts:
150
EE: 100% (162)
MA, USA
Member
Joined:
Feb 2022
Posts:
151
EE: 100% (162)
MA, USA
|
Originally Posted By northcoastwizard: DOI, a few reasons but mainly that our contract support is ending. I know, not sure where they're going but I'd like to take back my SN if they end up on the open market. I'll be sure to share if they do. I know that when my SWAT team went from the 1911's to the 320's they sold them back to a local FFL and our department got first dibs before other departments could come in and grab them. I'm a proud owner of a 1911 TACOPS and it is the smoothest shooting 1911 I've ever shot. She's currently up at SIG getting some maintenance work done now. |
Full Semi-Automatic.
|
Originally Posted By bChau: My FDE TacOps setup is getting more and more shades of FDE, and I love it. https://i.imgur.com/5ZaLuYM.jpg I love it too. |
|
Attached File Just got the Timney trigger, so I will be swapping that out tomorrow. |
My personal defensive weapons self-identify as black-nitride-American high-speed wireless peacekeeping devices. Only bigoted, racist and anti-science oppose them... Never Surrender
|
Finally bought an MCX. Attached File SIG MCX Rattler Canebrake SIG Romeo4T BCQP Ret Crimson Trace CMR-301 Reptilia Dot Mount L⅓ FDE Now need a Suppressor and alot of ammo! |
Precious Metal Delivery Service
Member
Joined:
Feb 2022
Posts:
274
EE: 100% (162)
MA, USA
Joined:
Jun 2022
Posts:
7
EE: 67% (6)
GA, USA
|
Originally Posted By JohnnyUtah427: https://live.staticflickr.com/65535/52043713752_cd9c79a5c3_b.jpg Is that the Surefire 300sps? |
|
Picked up a Rattler in 300BO. Local store had a Rattler pistol, I waffled on it and didn't buy it in time and of course it disappeared. Another local store had a rattler 300BO SBR. They also had a 15% off sale for father's day. So, I bought it and all told, after the discount, what the minimalist stock would have cost, and the NFA tax, I will be into it less than the pistol at the other store would have cost me on its own. I won't have it for a couple of months, and since this is a pic thread this is the best I can do for now. I got an attorney to revise my NFA trust, I need to get it notarized this coming week and then I can submit my Form 1 for the K-Pistol. 
|
When faced with crisis, the man of character falls back on himself.
|
Originally Posted By viralinsurgency: https://www.ar15.com/media/mediaFiles/491499/B7339681-5619-4857-8EBC-6B785C16015C_jpe-2376711.JPG Just got the Timney trigger, so I will be swapping that out tomorrow. Trying to build / buy this exact setup. Is that the MPX-K with a longer barrel and handguard? |
|
Here is my .300BO Rattler that I recently acquired. It is outfitted with the following: SIG SAUER Folding Pivoting Contour Brace w/ Gear Head Works Tailhook Mod.1 C Parker Mountain MCX BCD (Battery Control Device) Geissele Super MCX SSA Trigger Knights Armament Micro Sights (front and rear) Rail Scales HTP Scales M-LOK (Black, Honeycomb) SIG SAUER Rattler SD Handguard SIG SAUER 7.62 Inert Training Device (2402292-R) Radian Raptor MCX Charging Handle Trijicon MRO w/ ARD (Anti-Reflection Device) KDG SIDELOK™ Trijicon MRO Mount Lower 1/3 Co-witness Arisaka Defense M-LOK Finger Stop - Black Attached File Attached File Attached File Attached File |
"A bad day shooting beats a great day working!"
never underestimate the stupidity of other people
Joined:
Oct 2016
Posts:
15218
EE: 100% (29)
GA, USA
|
So tiny. 16” lever gun for scaleAttached File |
"every exercise is a low back exercise if you do it wrong enough"
@MacManus
@MacManus
The stampman made a deposit in my email's inbox today. Filed the Form 1 for the sbr on June 22nd and it came in today. Not bad for a weekend holiday.  Still waiting on my Rattler 300BO. Also need to pick up a couple of suppressors, thinking an Omega 9k for this MPK and a Sig SLH300Ti for the Rattler. I can get both of those at a shop down the street. |
When faced with crisis, the man of character falls back on himself.
|
Need to let the wallet cool off before I get a light setup for the MPX. Attached File |
|
Attached File Attached File Picked up an AGM TC35 clipon thermal. Haven't gotten a chance to shoot it yet but it's comical on the Rattler. Attached File Attached File Attached File Attached File Attached File |
Joined:
Jun 2022
Posts:
23
EE: 67% (6)
GA, USA
never underestimate the stupidity of other people
Joined:
Oct 2016
Posts:
15368
EE: 100% (29)
GA, USA
|
Originally Posted By astrocreep96: Still waiting on my Rattler 300BO. Also need to pick up a couple of suppressors, thinking an Omega 9k for this MPK and a Sig SLH300Ti for the Rattler. You're going to put Sig's longest suppressor on their shortest barrel? Consider the SLH762C(seen here on my 6.75" Virtus) or SLH762CTi. It's a very compact package, above my SRD9-MPX on my 4.5" MPX for a size comparison. 
|
|
Originally Posted By brazos609: You're going to put Sig's longest suppressor on their shortest barrel? Consider the SLH762C(seen here on my 6.75" Virtus) or SLH762CTi. It's a very compact package, above my SRD9-MPX on my 4.5" MPX for a size comparison. https://www.ar15.com/media/mediaFiles/151059/20220709_134301-2468454.jpg For him, I would think that it depends on what his priorities are. Sound suppression vs size. One or the other. No free lunch. If shooting subs, barrel length doesn't really matter that much. |
|
Originally Posted By brazos609: You're going to put Sig's longest suppressor on their shortest barrel? Consider the SLH762C(seen here on my 6.75" Virtus) or SLH762CTi. It's a very compact package, above my SRD9-MPX on my 4.5" MPX for a size comparison. https://www.ar15.com/media/mediaFiles/151059/20220709_134301-2468454.jpg @brazos609 How does that SLH762C sound? I'm hearing that it doesn't do much for noise reduction. |
Never Forget Those Who Died.
Never Forget Those Who Killed Them.
Never Forget Those Who Killed Them.
Joined:
Jun 2022
Posts:
38
EE: 67% (6)
GA, USA
|
My very loosely based “lvaw” rattler bastard clone Attached File |
Joined:
Jun 2022
Posts:
48
EE: 67% (6)
GA, USA
|
Fixing the image link. 
|
Sig MCX/MPX Photo Thread (Page 38 of 46)
Armory Sponsor
Join the Community
Your next conversation starts here.
Create your free account to join discussions, share your experience, save topics, and connect with the AR15.COM community.
- Join discussions
- Follow topics and replies
- Connect with fellow enthusiasts
Already a member? Sign in
Stay informed by subscribing to our Newsletter