Armory Sponsor
Posted: 12/2/2019 10:50:54 AM EDT
|
What's on your wish list?
1. MCX Spear, in 7.62/6.5 Jesusmoore 2. 80% MCX receivers 3. 6.5G barrel/bolt 4. ALL the aftermarket parts. |
Whatever it is, I want it explained by the SIG guy from SHOT Show 2018.
 Sig MCX Rattler, MCX Virtus, 6.5 Creedmor - SHOT Show 2018 Day 3 |
|
Quoted:
Whatever it is, I want it explained by the SIG guy from SHOT Show 2018.  https://www.youtube.com/watch?v=Rob7T355xeI |
A price reduction since it isn’t new anymore? 
A Virtus Patrol with a lightweight 16” barrel and intermediate-length 12-13” handguards in something like federal standard field drab 30118 or Magpul’s medium coyote tan. Hoping to see the Spear but I know it’ll be expensive. But more variety is always nice. |
|
Quoted:
Whatever it is, I want it explained by the SIG guy from SHOT Show 2018. https://www.youtube.com/watch?v=Rob7T355xeI
|
|
Quoted:
I'd settle for .40. With handloads and the 8" bbl, you should be able to get some impressive ballistics. The action certainly seams strong enough. Also, I don't know if the mags are wide enough to accommodate 10mm. Quoted:
Quoted:
10mm MPX would be fun. Also, I don't know if the mags are wide enough to accommodate 10mm. Either way, some MPX loving would be neat. ETA: Hell, I'd love a P320 in 10mm. Been holding out for either a "gen 5" Glock 10mm setup or a P320 10mm but so far that hasn't happened for either company. |
|
Quoted:
No, I meant what I said. I have no interest in Grendel but hope they have a conversion kit for those that do. Quoted:
Quoted:
Quoted:
6.5 After market barrels or Sig made barrels in different calibers. I have no interest in Grendel but hope they have a conversion kit for those that do. Now a big frame MCX? One that’s already been R&D’d and brings the same modularity of the MCX to .308 and 6.5CM? I’d be all about that. It’s a shame they’re so fond of rolling generational changes. I’d be in but I’d want to wait a few months for Gen 4 or so first.
|
|
Quoted:
That’s probably a ways off if ever. 6.5G is a niche round and orders of magnitude less in demand than 300BLK which is orders of magnitude less than 5.56. I say that as a fan and owner of the 6.5G. Now a big frame MCX? One that’s already been R&D’d and brings the same modularity of the MCX to .308 and 6.5CM? I’d be all about that. It’s a shame they’re so fond of rolling generational changes. I’d be in but I’d want to wait a few months for Gen 4 or so first. Hopefully it will be unveiled at SHOT. |
|
Quoted:
I will knock over old ladies to get the Spear, if finances permit. Hell, I might sell my 7.62 PredatOBR for one. Quoted:
Quoted:
I believe what you're asking about is the rumored MCX SPEAR. Hopefully it will be unveiled at SHOT. Hell, I might sell my 7.62 PredatOBR for one. |
|
Quoted:
I believe what you're asking about is the rumored MCX SPEAR. Hopefully it will be unveiled at SHOT. Quoted:
Quoted:
That’s probably a ways off if ever. 6.5G is a niche round and orders of magnitude less in demand than 300BLK which is orders of magnitude less than 5.56. I say that as a fan and owner of the 6.5G. Now a big frame MCX? One that’s already been R&D’d and brings the same modularity of the MCX to .308 and 6.5CM? I’d be all about that. It’s a shame they’re so fond of rolling generational changes. I’d be in but I’d want to wait a few months for Gen 4 or so first. Hopefully it will be unveiled at SHOT. |
|
Quoted:
I'd be down for a few 80% MCX receivers. Quoted:
Quoted:
What's on your wish list? 1. MCX Spear, in 7.62/6.5 Jesusmoore 2. 80% MCX receivers 3. 6.5G barrel/bolt 4. ALL the aftermarket parts. |
|
I just like the fact that it would be cheaper than the adapter, and it would still give you the ability to put a telescoping brace/stock on it. As a side note, I think I may put my adapter on my Seekins SBR for my Rattler. Haven't seen the adapter on a "deluxe" lower. |
|
Quoted:
Indeed but an 80% with my own custom engraved markings would be a bit more pleasing. Quoted:
Quoted: you know you can convert an AR15 receiver to accept an MCX right? |
|
Quoted:
Yup, It's not that pretty with an M4 lower. Attached File |
MCX Spear seen at a Yuropean arms show.
 SALON MILIPOL 2019 If you can read upside down at about 1:45 or so, it looks like 7.62x51, 6.8x51, and 6.5 Creedmoor.
Later on, you can see a 14" barreled 7.62 Rooshin version, which actually looks pretty good with a short handguard. |
|
Quoted:
MCX Spear seen at a Yuropean arms show. https://www.youtube.com/watch?v=YtbYuOELUmA
If you can read upside down at about 1:45 or so, it looks like 7.62x51, 6.8x51, and 6.5 Creedmoor.
Later on, you can see a 14" barreled 7.62 Rooshin version, which actually looks pretty good with a short handguard. For reference, the prior pic from TFB: 
Hnnnnggggg |
|
Quoted:
What hero of the wastes could possibly rescue us from such certain anguish . . . 
I'm guessing $2,200ish for the SPEAR? Hopefully? I dunno. It is pretty neat that the NGSW MG, if I'm using that term correctly, uses an upside-down Virtus gas system, at least that's what it looks like. |
Armory Sponsor