Armory Sponsor
QDSS-NT4 Pic Thread (Page 2 of 5)
|
Attached File Only shot 120 rounds yesterday, but I am pleased with the new PRG. |
Let's get after it.
For the glory of the empire, so say we all.
I collect blank posts and use them
For the glory of the empire, so say we all.
I collect blank posts and use them
|
Originally Posted By P229SAS: Very nice! How does the PRG compare to the legacy can with noise, backpressure etc? Thank you. I really couldn't tell much difference between them. I was surrounded to my left and right by unsuppressed AKs and ARs and the time between running the legacy NT-4 and the PRG was probably 30 minutes. FWIW, the MRP on the left has a KAC legacy barrel and BCG that DWilson did his magic to and I was shooting my YHM .30 Ti on that setup. The recoil impulse with that gun is almost non existent. You can lay into it as fast as you want and it stays where you put it. |
Let's get after it.
For the glory of the empire, so say we all.
I collect blank posts and use them
For the glory of the empire, so say we all.
I collect blank posts and use them
|
The NT4 PRG gas reduction is awesome. I found the legacy NT4 still has a deeper tone (shooting outside during testing) compared to the NT4 PRG. The NT4 PRG sounds a little quieter than a 5.56 CRS PRT though. Then I think it comes down to really which mounts you want to use as well. 
|
|
That's awesome. I got a bunch of 2 day approvals this week. Filed Monday and approved Wednesday! |
|
Originally Posted By dmtsc: Thanks to PreSampleDepot! Eight day approval. https://i.imgur.com/uJIVdNl.jpeg I need one of these in my life |
Ownership doesn't equal knowledge or ability
Joined:
Feb 2007
Posts:
2735
EE: 100% (320)
NV, USA
|
Originally Posted By FRBaseball: https://www.ar15.com/media/mediaFiles/116300/IMG_3389-3309172.jpg 
|
Let's get after it.
For the glory of the empire, so say we all.
I collect blank posts and use them
For the glory of the empire, so say we all.
I collect blank posts and use them
|
Attached File |
Let's get after it.
For the glory of the empire, so say we all.
I collect blank posts and use them
For the glory of the empire, so say we all.
I collect blank posts and use them
|
They loosen up some after putting them on and off. |
|
Originally Posted By apocalypserisin: Anyone else have issues mounting the qdss-prg onto nt4 flash hiders? Tolerances seem way too tight, and likely need to tap it with a mallet to get it on, and I have no idea how I would take it off. Mine reacted the same way. Initially, some 93048s are easy, others not so much. My 3T and M4QD MAMS were all GTG though. |
Let's get after it.
For the glory of the empire, so say we all.
I collect blank posts and use them
For the glory of the empire, so say we all.
I collect blank posts and use them
|
Originally Posted By apocalypserisin: Anyone else have issues mounting the qdss-prg onto nt4 flash hiders? Tolerances seem way too tight, and likely need to tap it with a mallet to get it on, and I have no idea how I would take it off. Mine fit perfectly, not too loose or tight. |
|
Originally Posted By JCap: https://www.ar15.com/media/mediaFiles/297005/IMG_3915-3314186.jpg So much win in this rig. Nicely done JCap 
|
Let's get after it.
For the glory of the empire, so say we all.
I collect blank posts and use them
For the glory of the empire, so say we all.
I collect blank posts and use them
|
This has me a little concerned. Not so much the rotation (which is expected with the legacy NT4, right?), but more so the lateral (side-to-side) play. Technically, it's not ever touching the alignment rod, so maybe I'm just being overly paranoid? I'm probably just being anal about it all - what do you think?  Failed To Load Title |
|
Originally Posted By Mblades: Where is everyone getting their PRGs at? I’m not having much luck finding them in stock. Ironic because I asked when they were going to be available a year or two ago and Jack said never because nobody wants them. Riflegear and Freedom Trading have them in stock in black |
|
Originally Posted By Mblades: Where is everyone getting their PRGs at? I’m not having much luck finding them in stock. Ironic because I asked when they were going to be available a year or two ago and Jack said never because nobody wants them. TBAC had some recently too. |
|
Originally Posted By wayfaerer320: This has me a little concerned. Not so much the rotation (which is expected with the legacy NT4, right?), but more so the lateral (side-to-side) play. Technically, it's not ever touching the alignment rod, so maybe I'm just being overly paranoid? I'm probably just being anal about it all - what do you think?  https://www.youtube.com/watch?v=qw7IFHFrT7cCob Wob. It's such a cool can but insanely primitive. Good thing the bore on it is huge, that's what gives it such a deep tone too. |
|
Originally Posted By PacificNic: Riflegear and Freedom Trading have them in stock in black Originally Posted By PacificNic: Originally Posted By Mblades: Where is everyone getting their PRGs at? I’m not having much luck finding them in stock. Ironic because I asked when they were going to be available a year or two ago and Jack said never because nobody wants them. Riflegear and Freedom Trading have them in stock in black Thanks. I ran through the usual suspects and didn’t see either of those places when I searched. |
|
Originally Posted By wayfaerer320: This has me a little concerned. Not so much the rotation (which is expected with the legacy NT4, right?), but more so the lateral (side-to-side) play. Technically, it's not ever touching the alignment rod, so maybe I'm just being overly paranoid? I'm probably just being anal about it all - what do you think? https://www.youtube.com/watch?v=qw7IFHFrT7cI would source a new M4QD flash hider to see if the fit could be better. The extra time/cost is worth not damaging your can. Maybe see what Jack L thinks too. |
<2></2>
|
Originally Posted By DirtDiver06: I would source a new M4QD flash hider to see if the fit could be better. The extra time/cost is worth not damaging your can. Maybe see what Jack L thinks too. Originally Posted By DirtDiver06: Originally Posted By wayfaerer320: This has me a little concerned. Not so much the rotation (which is expected with the legacy NT4, right?), but more so the lateral (side-to-side) play. Technically, it's not ever touching the alignment rod, so maybe I'm just being overly paranoid? I'm probably just being anal about it all - what do you think? https://www.youtube.com/watch?v=qw7IFHFrT7cI would source a new M4QD flash hider to see if the fit could be better. The extra time/cost is worth not damaging your can. Maybe see what Jack L thinks too. I wish I would have thought about that before I rocksetted and torqued the M4QD on hah. Lesson learned I suppose. |
|
We’ve had them in stock for over a month. Guess we didn’t make the usual cut. |
|
Originally Posted By Mblades: Where is everyone getting their PRGs at? I’m not having much luck finding them in stock. Ironic because I asked when they were going to be available a year or two ago and Jack said never because nobody wants them. I got mine from Dennis Todd. 23 days from order to stamp in hand through my local SOT. |
Let's get after it.
For the glory of the empire, so say we all.
I collect blank posts and use them
For the glory of the empire, so say we all.
I collect blank posts and use them
Joined:
Jan 2023
Posts:
207
EE: 100% (2)
TX, USA
|
@eyekhan Is that a WC 11.3 barrel? If so, how much gap do you have with the Mid RAS? |
Not a Tennessee Squire
|
Originally Posted By Eyekahn: It's a 12" Larue barrel that was chopped to like 11.2". The Wilson is just a hair longer. Shoulders are about in the same spot though. https://i.imgur.com/Bxr17QO.jpeg https://i.imgur.com/Yp4XHqL.jpeg Originally Posted By Eyekahn: Originally Posted By Subpar: @eyekhan Is that a WC 11.3 barrel? If so, how much gap do you have with the Mid RAS? It's a 12" Larue barrel that was chopped to like 11.2". The Wilson is just a hair longer. Shoulders are about in the same spot though. https://i.imgur.com/Bxr17QO.jpeg https://i.imgur.com/Yp4XHqL.jpeg goes off to find suitable components to clone this gun |
Let's get after it.
For the glory of the empire, so say we all.
I collect blank posts and use them
For the glory of the empire, so say we all.
I collect blank posts and use them
|
Originally Posted By oldbrowndog: Is the NT4 still in production? A well known dealer told me that they think they just received their last shipment and expect is is/will be discontinued soon. Dealers recently received new NT4s, both the 96062s and the PRG variants. |
Let's get after it.
For the glory of the empire, so say we all.
I collect blank posts and use them
For the glory of the empire, so say we all.
I collect blank posts and use them
|
Originally Posted By Eyekahn: It's a 12" Larue barrel that was chopped to like 11.2". The Wilson is just a hair longer. Shoulders are about in the same spot though. https://i.imgur.com/Bxr17QO.jpeg https://i.imgur.com/Yp4XHqL.jpeg Appreciate the pics, dude. That's a great looking setup! |
Not a Tennessee Squire
|
Originally Posted By Eyekahn: It's a 12" Larue barrel that was chopped to like 11.2". The Wilson is just a hair longer. Shoulders are about in the same spot though. https://i.imgur.com/Bxr17QO.jpeg https://i.imgur.com/Yp4XHqL.jpeg Very nice. I did a 11.5 medium ras build but with MCQ/shroud. This has become my favorite handguard. |
|
Originally Posted By dmtsc: I just got a 2 day approval for my NT4 that I got from PresampleDepot. Finally an old school nt4 to go with my nt4prg. Note, went to Texas last week and finally understand “Hell’s half acre”.
|
Let's get after it.
For the glory of the empire, so say we all.
I collect blank posts and use them
For the glory of the empire, so say we all.
I collect blank posts and use them
|
I found a few. The black one was from a local shop - owner had bought it years ago and used it some. He tossed in a MAMS. The taupe one is a new production one I found online that came with the NT4 muzzle device. 3 to 4 day approvals on both. What is not pictured is my Black PRG that I got on sale at Riflegear - that one is still in jail. For some reason my quick approvals stopped after these two (I have picked up over 10 cans in the last two months so maybe I triggered some watchlist.) Attached File |
|
Originally Posted By dmtsc: More nt4! Picked up the legacy one today. https://i.imgur.com/IwLmmtZ.jpeg corn cob goodness
|
Let's get after it.
For the glory of the empire, so say we all.
I collect blank posts and use them
For the glory of the empire, so say we all.
I collect blank posts and use them
|
Originally Posted By Rattle_head: https://live.staticflickr.com/65535/54096959056_f1fba2c3f0_k.jpg Perfection. |
Let's get after it.
For the glory of the empire, so say we all.
I collect blank posts and use them
For the glory of the empire, so say we all.
I collect blank posts and use them
|
Attached File First KAC can. Hopefully m110's hit the market again. |
QDSS-NT4 Pic Thread (Page 2 of 5)
Armory Sponsor