Warning

 

Close
Confirm Action

Are you sure you wish to do this?

Cancel Confirm
AR15.COM
Armory Sponsor
Previous Page
/ 11
Next Page
8/6/2009 8:53:36 PM EDT
[#1]
Subbed for pic. The more I look at this, the more I want to paint one of mine.
8/6/2009 9:54:00 PM EDT
[#2]
I pine strawed my B today (well, actually for the last 3 days) and about 8 mags.

Funny, it looks "greener" in photos. I just used the khaki for base and OD for the pine straw "shadowing".  












8/30/2009 10:29:15 PM EDT
[Last Edit: Wormydog1724][Edited] [#4]


I think it looks really really good.

8/31/2009 10:51:23 AM EDT
[#5]
Originally Posted By vermilla:
Here you go –– not sure how I feel about it yet.


Your pattern looks good - I'd add some darker colors, though.

Can I hunt it? No? Not interested.
8/31/2009 10:53:28 AM EDT
[#6]





I think it looks great.



 
Have you visited your Hometown Forum today?

http://www.ar15.com/forums/board.html?b=8

"Site Staff remembers when you could buy a keg of musket balls for $1.75"
8/31/2009 4:52:55 PM EDT
[#7]
Originally Posted By rizzo1318:
Originally Posted By vermilla:
Here you go –– not sure how I feel about it yet.


Your pattern looks good - I'd add some darker colors, though.



I thought about going with some dark lines in it, but the test batch didn't look too good with the dark brown.  It stood out too much IMO.

Thanks for the feedback. - AV
8/31/2009 5:07:46 PM EDT
[#8]
Originally Posted By vermilla:
Originally Posted By rizzo1318:
Originally Posted By vermilla:
Here you go –– not sure how I feel about it yet.


Your pattern looks good - I'd add some darker colors, though.



I thought about going with some dark lines in it, but the test batch didn't look too good with the dark brown.  It stood out too much IMO.

Thanks for the feedback. - AV


It looks like it would be a good match to that "texas mud" ya'll have down there, went to the nascar race in DFW and that sh*t stuck to my truck forever it seemed. its worse, imo, than the red dirt we have here!
8/31/2009 5:42:28 PM EDT
[#9]
Originally Posted By Wormydog1724:
Originally Posted By vermilla:
Originally Posted By rizzo1318:
Originally Posted By vermilla:
Here you go –– not sure how I feel about it yet.


Your pattern looks good - I'd add some darker colors, though.



I thought about going with some dark lines in it, but the test batch didn't look too good with the dark brown.  It stood out too much IMO.

Thanks for the feedback. - AV


It looks like it would be a good match to that "texas mud" ya'll have down there, went to the nascar race in DFW and that sh*t stuck to my truck forever it seemed. its worse, imo, than the red dirt we have here!


You are right about the environment down here.  I am not home very much, but TX is the only place that rifle goes out in the bush.

Thanks again for the feedback.- AV
8/31/2009 10:24:07 PM EDT
[#10]
What do you think?  My second attempt at painting a stock.







"If ever time should come, when vain and aspiring men shall possess the highest seats in Government, our country will stand in need of its experienced patriots to prevent its ruin." -Samuel Adams
9/1/2009 10:01:56 AM EDT
[Last Edit: Heineken][Edited] [#11]
Also posted this in the refinishing pic thread...

here is my first try, i am SUPER happy with the outcome, looks great in person, so far everyone who sees it is like WOW who did that for you!  I used krylon camo series.

It looks WAY better in natural light, when i get home today ima try to get some pics outside...did not have time last night, everything was done except the foregrip, it can in but by the time i got it painted and put on it was too dark for outside pics...


the paint seems like its gonna hold up great!!!  the only place it got dicked up at all was on the front sight and it was because im not patient and put it on the gun only 10 minutes after painting it...i figured its gonna get beat up anyway, and i wanted to see it all together!

BEFORE:



AFTER:






OBAMA = [img]anim_bs.gif[/img]
<Seriously, stop talking shit about our prices, we just edit it every time, we will kill your dog> - edited by CTD
9/2/2009 11:32:15 AM EDT
[#12]
and outside in natural lighting:










OBAMA = [img]anim_bs.gif[/img]
<Seriously, stop talking shit about our prices, we just edit it every time, we will kill your dog> - edited by CTD
9/2/2009 11:51:44 AM EDT
[#13]
Needs more purple.
Can I hunt it? No? Not interested.
9/2/2009 12:26:14 PM EDT
[#15]
Originally Posted By Heineken:
and outside in natural lighting:

http://i6.photobucket.com/albums/y247/Heineken420/Shotgun%20Paint%20Job/DSCN2138.jpg
quote]

Great work.
9/5/2009 4:50:12 PM EDT
[#16]
I decided to give it a try myself.  I am very pleased with the way it turned out.    

I used Krylon caqui camouflage as the base coat, followed by olive and brown, and finished up with two coats of matte finish.  

http://i37.photobucket.com/albums/e86/alleystang2000/camo2.jpg

and the other side

http://i37.photobucket.com/albums/e86/alleystang2000/camo1.jpg
9/25/2009 7:46:29 PM EDT
[#17]
You guys gave the krylon courage to try and give my ol m-4 the treatment...
11/19/2009 11:47:51 AM EDT
[#18]
It's been awhile since we've played find the rifle...
































I know, not that difficult but it does show some potential.
11/25/2009 11:21:33 PM EDT
[#19]
This was a BRAND NEW Remington 870 supermag. It almost pained me to strip off the new unfired stocks and lay the Krylon to them, but over all I like it. It will be used mainly for duck hunting so I stayed away from the brown and just used the Khaki and Olive with the straw from dissassembled broom.




Next up is my AR - .22LR its a spikes dedicated upper and a doublestar lower and LPK.
I painted a MOE handguard, A2 stock, grip, and a mag with the same colors as above.

I tired using some of the brown but it just looked too dark.




11/26/2009 3:58:53 PM EDT
[#20]
Bought a beat up rifle from a co-worker so I could test my hand at the broom straw camo.
Remington 700 ADL, 308Win, Bushnell 3-9x40.





"The most terrifying words in the English langauge are: I'm from the government and I'm here to help."
Ronald Reagan
11/29/2009 10:44:32 PM EDT
[#21]
Originally Posted By bjwar10:
It's been awhile since we've played find the rifle...I know, not that difficult but it does show some potential.


Actually that's a pretty damn good job. Think of it, your first photo looks like it was shot from 20-30' away. Unless an animal or enemy was sporting a white cane and sunglasses and you are as skinny as that tree, it's unlikely they wouldn't make out your human silhouette at such a distance. Or, for that matter, hear or even smell you. Camouflage really can't conceal much more than a fairly small item at such a distance. But back up that camera to 50 yards and shoot the photo with a 35mm lens setting. That focal length closely approximates normal human vision with a digital camera. Then let's play spot the AR again. There will be a BIG difference in how easy we can see your pinestraw artwork.




12/1/2009 11:17:00 PM EDT
[#22]
Convinced my brother-in-law (rustynails here on ARFCOM) to camo his AR before we headed out for some coyote killing. This is how it turned out, I think he did a good job.

Can I hunt it? No? Not interested.
12/3/2009 1:34:35 AM EDT
[#23]
Got some new glasses for driving at night and they came with this lame blue case. Well I couldn't let that slide! Flash kinda screws up the elk picture though - it's an RMEF sticker and I clear coated the whole case.

Can I hunt it? No? Not interested.
12/8/2009 8:29:54 PM EDT
[#24]
Originally Posted By kingston_fisher:
Bought a beat up rifle from a co-worker so I could test my hand at the broom straw camo.
Remington 700 ADL, 308Win, Bushnell 3-9x40.

http://i6.photobucket.com/albums/y239/kingston_fisher/700ADL031b.jpg

http://i6.photobucket.com/albums/y239/kingston_fisher/700ADL040b.jpg



Great job on your stock...
12/21/2009 9:04:53 PM EDT
[#25]
Did anyone see the History Channel last night...Sniper:Inside the Crosshairs?  Pretty good tribute.

I do believe I saw a pinestraw/broomstraw job on the Cpl's .308...the second or third story in...anyone else?
12/23/2009 10:41:21 PM EDT
[Last Edit: KB7DX][Edited] [#26]
Here's my submission.

Sterilized and on the operating table for a makeover.



Tack coat of Krylon khaki, then a second "full wet" coat and allowed to dry.


I used a whisk broom for my "straw" and found that pretty handy after I thinned it out a bit.
OD green applied.


Then the brown


and finally black


I wanted it more "greenish" than tanish, so I went back over it freelance with the OD green until I was satisfied.


I was hesitant to paint a new gun but what the heck, it's not a Parker..

ETA–– and page 12 OWNAGE
Joe Arpaio for Governor.
12/24/2009 12:25:22 AM EDT
[#27]
Wow, that turned out really good! Nice job.
Can I hunt it? No? Not interested.
12/28/2009 7:53:39 PM EDT
[#28]
Thanks rizzo. Actually, you were the inspiration for this gun. After reading your posts and replies to posts, I decided to get serious about coyote hunting, which led to the new shotty, which needed camo...
How can I buy a signed copy of your book?
Joe Arpaio for Governor.
12/28/2009 10:50:16 PM EDT
[#29]
Originally Posted By KB7DX:
Thanks rizzo. Actually, you were the inspiration for this gun. After reading your posts and replies to posts, I decided to get serious about coyote hunting, which led to the new shotty, which needed camo...
How can I buy a signed copy of your book?


That's the best compliment I've gotten in a while - thanks! IM inbound about the book.

Can I hunt it? No? Not interested.
1/19/2010 6:01:44 PM EDT
[#30]
Some good paint jobs here also...http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=127872#Post127872
(cut and paste in address bar)
1/19/2010 6:18:25 PM EDT
[Last Edit: Engineer5][Edited] [#31]
made it hot..... Here
-Nemo me impune lacesset.

-Beware the fury of a patient man.

-Thousands and thousands of laws....All for just ten commandments.

-"alot" is not a word.
1/25/2010 5:22:52 PM EDT
[#32]
Thanks for all of the great posts and info. And that last link was awesome ––it answered of my questions about what to cover and prep. This will really help me with my coyote rifle.
1/26/2010 9:27:37 PM EDT
[#33]
First try, this is the fun gun, it may get painted several more times
http://i51.photobucket.com/albums/f366/grayghost03/Hunting/AR15FullCamo.jpg
1/26/2010 9:55:11 PM EDT
[#34]
Originally Posted By grayghost03:
First try, this is the fun gun, it may get painted several more times
http://i51.photobucket.com/albums/f366/grayghost03/Hunting/AR15FullCamo.jpg


Looks good...How about a few ,ore pics outside and close up?
1/27/2010 8:08:14 PM EDT
[#35]
I will being calling with it this weekend, I will takes some field pictures and post.
1/28/2010 2:38:43 AM EDT
[#36]
OST
"Just name a hero and I'll prove he's a bum." - Gregory "Pappy" Boyington
2/4/2010 6:47:50 PM EDT
[#37]
Here is mine. It needs one more shade of tan for the local straw in the plains, but it's a good start.

I shot these at 50mm, which is supposed to be the closest to the human field of view.

40 feet


20 feet


10 feet


5 feet


This weekend I'll go out to get some field shots.
2/6/2010 2:40:16 PM EDT
[#38]








Primer red and khaki base coat, with OD green and brown sprayed through the broom straw.
2/6/2010 2:46:40 PM EDT
[#39]
F'in Sweet Bro!

Someone has rattle can skills
2/9/2010 9:21:38 PM EDT
[Last Edit: bap][Edited] [#40]
My humble attempt....inspired by this thread

My 10/22


And I was really bored and unhappy with the RIA factory grips, so sanded, stippled and rattle-canned them.


3/10/2010 12:36:26 AM EDT
[#41]



Originally Posted By bap:


My humble attempt....inspired by this thread



My 10/22

http://i430.photobucket.com/albums/qq26/DESRATBAP/22003.jpg



And I was really bored and unhappy with the RIA factory grips, so sanded, stippled and rattle-canned them.

http://i430.photobucket.com/albums/qq26/DESRATBAP/ria014.jpg





I really like how those grips turned out.








 
Trust. But verify.

That includes this, and all other posts.

Not only is this one a Fed, but seems to be another Airedale Wingnut Squid. -JS98010
3/14/2010 11:57:44 PM EDT
[#42]
6.8 SPC - 18" WOA 1:11 Before & After







4/3/2010 5:05:18 PM EDT
[Last Edit: QP031][Edited] [#43]
Mine was tiger, but I re-did it with pine straw.
It might be a bit too dark. Might do it again, trying to make it lighter.

<center id=center>صليبي
REMEMBER 911!
Google: JOE HOOPER.

III - O.K.
</center id=center>
4/6/2010 3:21:10 PM EDT
[#44]
Originally Posted By QP031:
Mine was tiger, but I re-did it with pine straw.
It might be a bit too dark. Might do it again, trying to make it lighter.

http://i165.photobucket.com/albums/u70/stitch2rbn/Host/DSC01035.jpg


Looks great to me.  I would like to see a few more pics outside.
4/16/2010 12:46:57 PM EDT
[Last Edit: Hoodooman][Edited] [#45]
Well, I finally took the plunge & rattle canned' my 870 - just in time for Turkey season...
I used Rust-oleum Camouflage paints - Khaki for the basecoat, then Deep Forest Green & Earth Brown (& a light dusting of flat black Krylon) with the pine straw. Areas that came out too solid dark got hit with pinestraw khaki highlights, then I used a Valspar flat clearcoat.

My plain old 870 Express Magnum


With the 20 inch Mossy Oak Breakup barrel that I got for 75 bucks on sale @ Remington's online store...


Now to get to work...











6/4/2010 1:42:46 AM EDT
[#46]
My Dad bought a Mossberg 500 12ga pump at a yard sale for $50, and the finish on the metal was all but gone. A little pinstraw and BAM! - ugly to awesome in less than an hour.





Can I hunt it? No? Not interested.
6/5/2010 2:20:32 PM EDT
[#47]
I have a couple of shotguns with poor finishes that I would love to paint with the pine-straw technique. Thanks to everyone who posted pictures and explanations. I hope to get one of mine painted soon.

jonblack
7/2/2010 3:49:06 PM EDT
[#48]
Here's the latest work in progress...
7/3/2010 12:07:51 PM EDT
[#49]
Originally Posted By Hoodooman:
Here's the latest work in progress...
http://i990.photobucket.com/albums/af25/arhoodooman/Truckcamo011.jpg


You have gone to a whole new level!
7/8/2010 8:05:47 PM EDT
[#50]
I kinda used the pine straw method but instead of using pine straw, I used burlap strands and dandi lion weeds!

Sign up to continue the discussion

Create a free account to share your thoughts, follow topics, and connect with the AR15.COM community.

Already a member? Sign In

Previous Page
/ 11
Next Page
Armory Sponsor