User Panel
[Last Edit: pants222]
[#1]
Originally Posted By lsujim: Is there any way to fit an AEM5 on a 11.5 with fsb? View Quote I think this adapter would do the trick: https://ottercreeklabs.com/product/midway-adapter/ |
|
|
[#2]
Originally Posted By Eruoen: I would assume the M4 can is quieter? How do they compare to each other? View Quote https://www.ar15.com/forums/Armory/Ops-Inc-Allen-Engineering-Picture-and-Discussion-Thread/20-445848/?page=61#i5602850 |
|
|
[Last Edit: TyrannyOfTheMinority]
[#3]
Who's got experience with an AE M24/Ops 3rd on a bolt gun? All my Ops/AE stuff is AR centered, but Ron mentioning them a few pages back has my gears turning on project possibilities.
Pics? Range reports? Ideal barrel length without begin too long? Is ADCO still the best for doing the contouring (in the precision bolt gun world)? You know how it goes... dreaming up a fictional rifle that I can then use to rationalize buying a suppressor I have no gun for... which I can then use to rationalize buying another rifle I don't need. |
|
|
[#5]
Someone please put one of the direct thread gordy cans on a 20inch rifle please!
Also, if not out of bounds, what are they running for? |
|
|
[#6]
this is the best thread here in years. thanks, Ron Allen.... youse the Man!
|
|
|
[#7]
Originally Posted By UnknownPatriot: Looks like some Aem5 are available on e silencers. Saw the pic of their big stack for sale. Awesome to see all that hard work. Wonder what state these are marked. View Quote UnknownPatriot, thanks to your post. I was able to purchase one from John. And, they are market Sparks, NV. Forever thankful, Jim |
|
|
[#8]
Originally Posted By Garthe: UnknownPatriot, thanks to your post. I was able to purchase one from John. And, they are market Sparks, NV. Forever thankful, Jim View Quote Attached File Well done! For me the aem5 was my bucket list silencer. Just iconic. So grateful that I had the opportunity to buy one. |
|
|
[Last Edit: bradpierson26]
[#9]
|
|
I wouldn't stand in front of a piss-filled supersoaker. Does that make it a good pistol? - Caboose314
I thought I was covered for 22 cans, but the NFAids is a bitch when it mutates - themagikbullet |
[#11]
Sent an email on the website regarding purchasing a Gordon collar and AEMB.
|
|
That which does not kill us makes us stronger. - Friedrich Nietzsche
I've stayed relatively employed most of my adult life. That should count as miracle #1 - Wandering_Moses |
[#12]
I’ve had a CA MK12 barrel in the parts bin for a few years. Then I fell asleep at the wheel and did not buy a AEM5 when I would have. Now I got 6-12 months to get my shit together. Let the clone games begin...lol.
|
|
|
[Last Edit: bimmertech87]
[#13]
I apologize if this has been asked before, anyone have specs on the Gordy can length and weight specifically?
For those who have experience with both the Gordy and the aem5 is having both a necessity for the Gordon rifle? I have the aem5 and am trying to justify getting the Gordy can. I know it ain’t cloning if it’s not the same. Just need the nudge. |
|
|
[#14]
I have both, AEM5 on my MK12 and Gordy on a 14.5. The Gordy is 100% worth it, it's silly quiet for a 5.56/.223. I haven't personally experienced a .300 Blackout yet but people have mistaken my Gordy for one on both indoor and outdoor ranges.
|
|
|
[#15]
That's what I want to hear. I emailed a few weeks back about one too. Hope that another batch happens at some point. Wicked cool part of history to own.
|
|
|
[#16]
Ok, I always thought the AEM5/OPS 12 was the Gordy can. What's the difference between a Gordy can and a AEM5?
|
|
That which does not kill us makes us stronger. - Friedrich Nietzsche
I've stayed relatively employed most of my adult life. That should count as miracle #1 - Wandering_Moses |
[#17]
4" reflex on the Gordy and 2" reflex on the AEM5. The Gordy threads directly onto the 1/2x28 threads of a 14.5 barrel without a need for a muzzle device, and the Gordy is a bit (1.5"?) longer.
|
|
|
[#18]
I really want one for a heavy barrel .223 bolt gun the more I think about it…
|
|
|
[#19]
|
|
That which does not kill us makes us stronger. - Friedrich Nietzsche
I've stayed relatively employed most of my adult life. That should count as miracle #1 - Wandering_Moses |
[#20]
|
|
|
[#21]
I hate myself for giving the uboat captain business but I bought one of the gordon barrel/m4 suppressor combos charlies had available.
Emailed Ron about them and never heard back so I figured it was my best bet to get one.. |
|
|
[Last Edit: Eruoen]
[#23]
Originally Posted By TigerHawk:I hate myself for giving the uboat captain business but I bought one of the gordon barrel/m4 suppressor combos charlies had available. Emailed Ron about them and never heard back so I figured it was my best bet to get one.. View Quote Yeah, that's what I was hoping to avoid myself.... |
|
|
[#24]
Originally Posted By TIML: Gordon in the middle, AEM5 on the bottom. https://i.postimg.cc/B6zBRGmB/Screenshot-20221008-011555-588.png View Quote View All Quotes View All Quotes Originally Posted By TIML: Originally Posted By Cowbell: Originally Posted By Eruoen: 4" reflex on the Gordy and 2" reflex on the AEM5. The Gordy threads directly onto the 1/2x28 threads of a 14.5 barrel without a need for a muzzle device, and the Gordy is a bit (1.5"?) longer. Thank you for the explanation. Gordon in the middle, AEM5 on the bottom. https://i.postimg.cc/B6zBRGmB/Screenshot-20221008-011555-588.png Awesome collection. Thank you for the picture! |
|
That which does not kill us makes us stronger. - Friedrich Nietzsche
I've stayed relatively employed most of my adult life. That should count as miracle #1 - Wandering_Moses |
[#25]
|
|
|
[#26]
Originally Posted By TyrannyOfTheMinority: Thought you guys might find this comparison pic interesting. Took it while fiddling with some mounts and new collars. The middle one is a birdcage mount from Ron back in his Ops Inc days. Right hand side is a current production ADCO birdcage purchased recently. The brake is sitting on the crush washer as that's what I typically install them with. The Ops flash hider came installed on some very thin shimming when I ordered it from HCS way back when. Have not installed the ADCO flash hider on anything yet - looks like a washer would be a no-go and it would need thin shims also in order to maintain the same relative location of threading for the suppressor. https://i.postimg.cc/d1qfryV5/Ops-AE-Mounts.jpg And now that I post this pic, I see an M4S peeking in off the left edge of the frame... it's jealous, evidently. View Quote I have an adco profiled howa with the adco A1 fh, ill get u a pic of what they used :) |
|
|
[#27]
|
|
I wouldn't stand in front of a piss-filled supersoaker. Does that make it a good pistol? - Caboose314
I thought I was covered for 22 cans, but the NFAids is a bitch when it mutates - themagikbullet |
[#28]
Just got off the phone with Ron. What an incredibly helpful and nice individual. Gordon collar has been ordered.
|
|
That which does not kill us makes us stronger. - Friedrich Nietzsche
I've stayed relatively employed most of my adult life. That should count as miracle #1 - Wandering_Moses |
[Last Edit: TyrannyOfTheMinority]
[#29]
For mounting an M24 model can on a bolt gun-
How much meat do I need on the barrel profile to machine in the mounting taper (i.e. outer diameter of bbl at aft end of suppressor)? Do I need a proper big boy M24 barrel profile to do it, or does it work with other "heavy" profiles like a Remington varmint style? Flagging for @k31user or @BigBore or @Shlouf |
|
|
[Last Edit: Shlouf]
[#30]
0.92” min per the AE drawings. M24 can is the same as the ae30 just more reflex length and different thread pitch
|
|
|
[#31]
Originally Posted By TyrannyOfTheMinority: For mounting an M24 model can on a bolt gun- How much meat do I need on the barrel profile to machine in the mounting taper (i.e. outer diameter of bbl at aft end of suppressor)? Do I need a proper big boy M24 barrel profile to do it, or does it work with other "heavy" profiles like a Remington varmint style? Flagging for @k31user or @BigBore or @Shlouf View Quote .920 to contour directly into the barrel. A collar can be made for a bolt gun barrel just like an AR barrel. There are very few (almost none) factory bolt guns barrels that are big enough to not need a collar. |
|
I'm no good at telling people what they want to hear when I dont believe it myself :)
|
[#32]
Perfect. Thanks for the info, gents. I will go forth and conquer.
|
|
|
[#33]
Hi guys, I just picked up a AEM5. Can the collar kit for the muzzle devise be used on a cage code colt socom 14.5” barrel? Or, is the profile of the barrel were in contacts the collar to big? Thank you for the help! Jim
|
|
|
[#34]
Originally Posted By Garthe: Hi guys, I just picked up a AEM5. Can the collar kit for the muzzle devise be used on a cage code colt socom 14.5” barrel? Or, is the profile of the barrel were in contacts the collar to big? Thank you for the help! Jim View Quote You need a M4 to AEM5 collar. SPR collar won't work on a M4 barrel without work. |
|
|
[#35]
Anyone know any nice rails that would provide a flush fit for a 16” SPR barrel?
|
|
|
[#36]
|
|
|
[#37]
|
|
|
[#38]
Originally Posted By bigbore: .920 to contour directly into the barrel. A collar can be made for a bolt gun barrel just like an AR barrel. There are very few (almost none) factory bolt guns barrels that are big enough to not need a collar. View Quote Can the contoured area be bead blasted or should it remain raw (perhaps blackened/phosphated at most)? |
|
|
[#39]
|
|
I'm no good at telling people what they want to hear when I dont believe it myself :)
|
[#40]
Originally Posted By Gremyashchy1911: https://i.imgur.com/P2oVI9Q.jpg Upper in question and a 12.5 project https://i.imgur.com/1UfKhIn.jpg .170 gap off the end of the rail View Quote Looks good! I went with a Midwest Industries combat rail in 13.375" and a 16" SPR barrel with the Ops contour. If my math isn't off, there should be about .1625 gap. |
|
|
[#41]
|
|
|
[Last Edit: HaveBlue83]
[#42]
|
|
|
[Last Edit: Wctrirn]
[#43]
Nevermind
|
|
|
[Last Edit: stainlineho]
[#44]
|
|
|
[Last Edit: bradpierson26]
[#45]
Originally Posted By stainlineho: Just waiting on a 3 slot pic rail section to actually attach the bipod... https://i.imgur.com/jGXnL4F.jpg Fitment: https://i.imgur.com/43otxe9.jpg View Quote That’s an impressive gap. I like your rifle |
|
I wouldn't stand in front of a piss-filled supersoaker. Does that make it a good pistol? - Caboose314
I thought I was covered for 22 cans, but the NFAids is a bitch when it mutates - themagikbullet |
[#46]
Just finished the batch of M24's. As soon as they get back from cerakote I will start down the list. I did put the knurling on the front end
this time. |
|
|
[#47]
@k31user
Are there any extras, or are they all spoken for? |
|
|
[#48]
@k31user
Gordons going into production after? |
|
|
[#49]
Is there a reputable place that has AEM5’s in stock ? I’m putting together a MK12 mod O.
|
|
|
[#50]
Originally Posted By home_alone1: Is there a reputable place that has AEM5’s in stock ? I’m putting together a MK12 mod O. View Quote https://esilencers.com/product/allen-engineering-aem5-knurled-556/ |
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.