Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Arrow Left Previous Page
Page / 22
Posted: 5/2/2013 6:19:48 PM EDT
[Last Edit: 5/3/2013 10:39:46 AM EDT by TCBA_Joe]
I can't believe we don't have this yet...
Weapon Mounted IR Laser Pic Thread

Post a pic of your DBALs, PEQs, Vitals, etc... Bonus points for something unique like a Newcom LAM.
Please no Chinese knock-offs. Lot's of fake PEQ-15s in the Block II threads, lets keep that out of here.

PLEASE ADD DESCRIPTIONS OF LASER SETUPS AND FIREARM

I'll start:
Daniel Defense DDM4v1
TA31 ACOG
Surefire m600 with KM2 scout head
LDI DBAL I^2 w'/ Green Laser



Link Posted: 5/2/2013 6:26:50 PM EDT
I've looking forward to this thread.
Link Posted: 5/2/2013 7:01:51 PM EDT
Found this on my phone:
Vital-2 (I sold) on a BCM 14.5 A2X (that I also sold)
Link Posted: 5/2/2013 7:19:27 PM EDT
[Last Edit: 5/3/2013 10:11:08 AM EDT by SkyPup]
LDI DBAL-I2 IR & VIS Green



LDI DBAL-I2 IR & VIS Green



LDI DBAL-I2 at night



LDI DBAL-I2 IR & Vis Green



LDI DBAL-I2 & TNVC Torch Pro



LDI DBAL-D2 IR & IR Illum & Vis Green



SIG 556 TNVC PVS-14 3X Mag Eotech NV LDI DBAL-I2 Torch Pro



SIG 716 ACOG TAO2LED FLIR T-50 LEDI DBAL-D2



LDI DBAL-D2 with IR Neutral Density Filter



SIG 556 LDI DBAL-D2 FLIR T-60 ACOG TA02LED

Link Posted: 5/2/2013 7:23:17 PM EDT
Link Posted: 5/2/2013 7:30:36 PM EDT
[Last Edit: 5/3/2013 12:42:38 PM EDT by di1uted]
Nice pics joe

CQBL


Link Posted: 5/2/2013 7:37:16 PM EDT

An older picture with my older PAQ-4C. I've gone to an LDI LAS/TAC and a helmet mount now.


CHRIS
Link Posted: 5/2/2013 8:16:39 PM EDT
[Last Edit: 5/3/2013 6:19:44 PM EDT by Darkstar117]
SOCOM Block II Clone:
Laser Devices DBAL-D2



Link Posted: 5/2/2013 9:06:08 PM EDT
[Last Edit: 5/3/2013 6:20:01 PM EDT by Darkstar117]
FN SCAR 17S:
Laser Devices DBAL-I2


Link Posted: 5/2/2013 9:07:09 PM EDT
[Last Edit: 5/3/2013 6:20:20 PM EDT by Darkstar117]
FN SCAR 16S:
Laser Devices DBAL-I2


Link Posted: 5/2/2013 9:58:27 PM EDT
Link Posted: 5/2/2013 10:08:34 PM EDT
Shitty pic, but you get the idea.

Link Posted: 5/2/2013 10:19:16 PM EDT
Originally Posted By TNVC:
A few lasers in this mess!

http://img.photobucket.com/albums/v621/Clutch99/Shot_Prep1_zpsb18de16c.jpg


Holy crap!

Send to me immediately for product testing.
Link Posted: 5/2/2013 11:14:56 PM EDT
My work gun.





Link Posted: 5/2/2013 11:29:44 PM EDT
I like that camo.
Link Posted: 5/2/2013 11:41:14 PM EDT
[Last Edit: 5/7/2013 10:41:43 AM EDT by bobweaver]




Link Posted: 5/2/2013 11:50:36 PM EDT


I'm gonna go out on a limb here and say the purpose of the thread is for you to show us what "LASERS" you personally own and not to cut and paste some SEAL kit even if your a SEAL
Link Posted: 5/2/2013 11:58:40 PM EDT
[Last Edit: 5/3/2013 12:00:09 AM EDT by bobweaver]
Originally Posted By CTM1:


I'm gonna go out on a limb here and say the purpose of the thread is for you to show us what "LASERS" you personally own and not to cut and paste some SEAL kit even if your a SEAL


Threw in the bottom one as my wish list. Is that against the rules?
Link Posted: 5/3/2013 4:57:17 AM EDT
Wish I had something to post in here...

Bring forth the inspiration, though!

~Augee
Link Posted: 5/3/2013 6:53:21 AM EDT
Link Posted: 5/3/2013 8:48:44 AM EDT
Originally Posted By TNVC:
A few lasers in this mess!

http://img.photobucket.com/albums/v621/Clutch99/Shot_Prep1_zpsb18de16c.jpg


I absolutely love that BEM IZ........that is the light saber of the IR world!
Link Posted: 5/3/2013 8:51:22 AM EDT


Link Posted: 5/3/2013 9:43:41 AM EDT
It'd be helpful to those of us that 1) don't live in Texas, where everyone seems to have at least one PVS14 or 2) don't work for TNVC if posters threw in a little description/ name of the lasers they're rocking. Browser keeps getting tired of swapping back and forth between AR15.com and TNVC's laser page trying to figure out what is what.

Other than that (slight) whine, great pics, and as always, thanks for the information and inspiration.
Link Posted: 5/3/2013 9:54:23 AM EDT
Link Posted: 5/3/2013 10:41:19 AM EDT


What is wrong with you?

Originally Posted By ncorry:
It'd be helpful to those of us that 1) don't live in Texas, where everyone seems to have at least one PVS14 or 2) don't work for TNVC if posters threw in a little description/ name of the lasers they're rocking. Browser keeps getting tired of swapping back and forth between AR15.com and TNVC's laser page trying to figure out what is what.

Other than that (slight) whine, great pics, and as always, thanks for the information and inspiration.


Good call, OP updated to request descriptions of setups
Link Posted: 5/3/2013 12:28:02 PM EDT

Link Posted: 5/3/2013 12:52:32 PM EDT
Originally Posted By RenegadeX:
<a href="http://s839.photobucket.com/user/Umbrarian/media/Guns/300BLKIR_zpsb6886da8.jpg.html" target="_blank">http://i839.photobucket.com/albums/zz314/Umbrarian/Guns/300BLKIR_zpsb6886da8.jpg</a>

<a href="http://s839.photobucket.com/user/Umbrarian/media/Guns/BlackOutUpper.jpg.html" target="_blank">http://i839.photobucket.com/albums/zz314/Umbrarian/Guns/BlackOutUpper.jpg</a>


Renegade,

How are your BDC holds with that set up? What's the POI and hold over changes like between super and subs? What distance do you zero the IR?

Been thinking of doing a similar 300 black. Thanks
Link Posted: 5/3/2013 1:21:56 PM EDT
Originally Posted By RenegadeX:
<a href="http://s839.photobucket.com/user/Umbrarian/media/Guns/300BLKIR_zpsb6886da8.jpg.html" target="_blank">http://i839.photobucket.com/albums/zz314/Umbrarian/Guns/300BLKIR_zpsb6886da8.jpg</a>

<a href="http://s839.photobucket.com/user/Umbrarian/media/Guns/BlackOutUpper.jpg.html" target="_blank">http://i839.photobucket.com/albums/zz314/Umbrarian/Guns/BlackOutUpper.jpg</a>


Nice setup M.

The ITAL is underrated IMHO, but is a perfect match for the mortar-like trajectory of the 300 BLK.
Link Posted: 5/3/2013 3:01:55 PM EDT
On the 300 black/whisper has anyone thought of approaching Laser Devices and having them make a DBAL-I2 or a CQBL with two IR lasers instead of the red or green laser as the second beam. Does anyone really use the red or green? With two IR's I see two scenarios, one IR for subs and one IR for supers or both for subs but for two different ranges.
Link Posted: 5/3/2013 3:07:39 PM EDT
Originally Posted By bobweaver:
Originally Posted By CTM1:


I'm gonna go out on a limb here and say the purpose of the thread is for you to show us what "LASERS" you personally own and not to cut and paste some SEAL kit even if your a SEAL


Threw in the bottom one as my wish list. Is that against the rules?


Not trying to poke you, but was trying to say lets keep with the OP's wishes of keeping the thread to "real lasers owned and no fake stuff".
Link Posted: 5/3/2013 3:09:41 PM EDT

Originally Posted By bobweaver:
Originally Posted By RenegadeX:
<a href="http://s839.photobucket.com/user/Umbrarian/media/Guns/300BLKIR_zpsb6886da8.jpg.html" target="_blank">http://i839.photobucket.com/albums/zz314/Umbrarian/Guns/300BLKIR_zpsb6886da8.jpg</a>

<a href="http://s839.photobucket.com/user/Umbrarian/media/Guns/BlackOutUpper.jpg.html" target="_blank">http://i839.photobucket.com/albums/zz314/Umbrarian/Guns/BlackOutUpper.jpg</a>


Renegade,

How are your BDC holds with that set up? What's the POI and hold over changes like between super and subs? What distance do you zero the IR?

Been thinking of doing a similar 300 black. Thanks

I use 220 subsonic and it is BZ to about 125 yards. I initially used 50 yards as the zero, but upon advice from Robert I switched to 100 which is a little flatter. There are some very minor differences between T-1 and laser since the laser sits a little lower than the T-1, but it is negligible for the distances I shoot this gun at. So with BZ I know the laser is about +- 2 inches from POI out to about 125 yards. I do not do holdover past that, the 220s drop pretty fast.

Also, the WML works fine for these shorter ranges.
Link Posted: 5/3/2013 3:56:16 PM EDT
[Last Edit: 5/3/2013 6:35:04 PM EDT by SkyPup]


Also has TNVC Torch Pro and Olight M-20 Crimson Red Led mounted too.


Without the IR laser:












Due to numerous PM inquires as to a bull barrel picitanny rail mount with three rails on my Ruger 10-22, here where you can get the LaserLyte shotgun mount, I put a thin ring of rubber strap around the barrel prior to mounting it, it fits good and tight and works excellent:



http://www.amazon.com/Laserlyte-Shotgun-Rail-Mount-Exte/dp/B0041FPG40
Link Posted: 5/3/2013 6:34:31 PM EDT
M16A4 Clone-ish:
Laser Devices DBAL-I2
With an Aussie behind the sights.

Link Posted: 5/3/2013 9:53:19 PM EDT
I finally get to play... Got it today.. DBAL-D2



Link Posted: 5/3/2013 11:53:31 PM EDT
Originally Posted By bg10:

Originally Posted By r-allen:

I like that camo.


Yep... Details on that camo?


Thanks.

The camo is just a homebrew Krylon job. I did it on my back deck about 3 feet to the left of where those pictures were taken. Nothing special really I just used a bunch of different vegetation as a template. I thought it turned out pretty good.

As far as the laser is concerned it is a Laser Devices CQBL-1.
Link Posted: 5/4/2013 12:53:45 AM EDT



My Block 2 w DBAL-I2. Just got it from Mod Armory. It has the hi/lo IR setting and green laser.
Link Posted: 5/4/2013 1:12:43 AM EDT
Originally Posted By CTM1:
On the 300 black/whisper has anyone thought of approaching Laser Devices and having them make a DBAL-I2 or a CQBL with two IR lasers instead of the red or green laser as the second beam. Does anyone really use the red or green? With two IR's I see two scenarios, one IR for subs and one IR for supers or both for subs but for two different ranges.


Tried that exact thing with .22lr subs and supers using a 2A. Dialed illuminator down to same size as laser: Left laser for subs ( 25 yards ) and right for supers ( 50 yards ). Found that the difference in POI was enough to warrant the two separate lasers.
Link Posted: 5/4/2013 6:15:48 AM EDT
[Last Edit: 5/4/2013 6:19:27 AM EDT by patriot_man]
For all of you guys with the SR-D-IT's how the hell do you guys hold your weapons or activate them? I've tried them mounted on the 9 or 3 o clock where my support hand would be but they make the width too wide and in turn I can not get a good grip on the gun. I actually see that many of you guys run them in conjunction with vertical foregrips, maybe that's why I haven't had much luck.
Link Posted: 5/4/2013 8:02:22 AM EDT
Originally Posted By patriot_man:
For all of you guys with the SR-D-IT's how the hell do you guys hold your weapons or activate them? I've tried them mounted on the 9 or 3 o clock where my support hand would be but they make the width too wide and in turn I can not get a good grip on the gun. I actually see that many of you guys run them in conjunction with vertical foregrips, maybe that's why I haven't had much luck.


Go look at my pic on Pg 1. It's ambi, and won't ever get bumped doing barricades. That set up has the secondary advantage of being about as ambi as you can get it the tape switch is missing or disabled.
Link Posted: 5/4/2013 9:30:23 AM EDT
Originally Posted By patriot_man:
For all of you guys with the SR-D-IT's how the hell do you guys hold your weapons or activate them? I've tried them mounted on the 9 or 3 o clock where my support hand would be but they make the width too wide and in turn I can not get a good grip on the gun. I actually see that many of you guys run them in conjunction with vertical foregrips, maybe that's why I haven't had much luck.


I have seen pics where guys have tucked the pressure pad in between the groove of the 12 and 9 o'clock rails.
Link Posted: 5/4/2013 1:50:43 PM EDT
Originally Posted By CTM1:
Originally Posted By patriot_man:
For all of you guys with the SR-D-IT's how the hell do you guys hold your weapons or activate them? I've tried them mounted on the 9 or 3 o clock where my support hand would be but they make the width too wide and in turn I can not get a good grip on the gun. I actually see that many of you guys run them in conjunction with vertical foregrips, maybe that's why I haven't had much luck.


I have seen pics where guys have tucked the pressure pad in between the groove of the 12 and 9 o'clock rails.



That's what I did
Link Posted: 5/4/2013 4:53:11 PM EDT
LDI LAS/TAC2


LDI MP5 cocking tube IR laser



LDI DBAL I2


LDI OTAL C1 IR


LDI AR2A


I like me some LDI.
Link Posted: 5/4/2013 4:58:08 PM EDT
[Last Edit: 5/4/2013 5:00:23 PM EDT by TCBA_Joe]
Link Posted: 5/4/2013 5:02:56 PM EDT
LWRC with OTAL







Link Posted: 5/4/2013 6:24:26 PM EDT
Originally Posted By TCBA_Joe:
What is the LED looking thing under the muzzle?


It is just the hex set screw for clamping the foreend rail to the frame. It would be a great place for an IR laser illum though.

I really like the LDI cocking tube laser. They make a dual vis/ir setup I may have to get someday. I wish they were compatible with my MP5SD though, but alas.
Link Posted: 5/4/2013 7:32:07 PM EDT
[Last Edit: 5/4/2013 7:32:51 PM EDT by NorthStaR209]
Originally Posted By TDunn:
Originally Posted By TCBA_Joe:
What is the LED looking thing under the muzzle?


It is just the hex set screw for clamping the foreend rail to the frame. It would be a great place for an IR laser illum though.

I really like the LDI cocking tube laser. They make a dual vis/ir setup I may have to get someday. I wish they were compatible with my MP5SD though, but alas.


Is the IR civi unit available for the MP5 now? I keep checking around but only run into the high power version. The unit with the vis laser and ir point looks badass too.
Link Posted: 5/4/2013 7:38:33 PM EDT
Originally Posted By NorthStaR209:

Is the IR civi unit available for the MP5 now? I keep checking around but only run into the high power version. The unit with the vis laser and ir point looks badass too.


You have to call them and order it, there was another guy on here that has one on his MP5.
You'll have to wait a few weeks on it, I'm reluctant to purchase it just yet for my HK94.

IIRC he had an M600 with the vampire head and a thorntail mount on the surefire rail.

Link Posted: 5/4/2013 7:53:06 PM EDT
Originally Posted By NorthStaR209:

Is the IR civi unit available for the MP5 now? I keep checking around but only run into the high power version. The unit with the vis laser and ir point looks badass too.


Yes, the one in my MP5 (pictured) is a C1 civilian unit. In truth, 0.7mW is still quite a bit of power at subgun ranges with current gen NVG. I'm sure TNVC can order you one if you want it.
Link Posted: 5/4/2013 7:55:32 PM EDT
[Last Edit: 5/4/2013 8:24:24 PM EDT by NorthStaR209]
Has there not been a full release on them or just a product of little demand?
Laser Devices cqbl-1

Link Posted: 5/6/2013 12:51:56 AM EDT
[Last Edit: 5/6/2013 12:52:13 AM EDT by Ryan_Ruck]
LaRue OBR 7.62 20" with Newcon LAM2:



Glock 21 with LAS/TAC:



Robinson Armament XCR in 7.62x39 with DBAL-D2:
Link Posted: 5/6/2013 10:03:59 PM EDT
Scar 17S with FDE LDI CQBL-1



Arrow Left Previous Page
Page / 22
Top Top