Armory Sponsor
Let's see your Mk11, M110, and military variants (: (Page 34 of 40)
|
Originally Posted By ShaneWang: It's getting really close to be finished. https://i.imgur.com/CJ9bIp0.jpg Oh damn!  Where'd you find a Premier? |
God will not look you over for medals, diplomas, or degrees – but for scars
|
Originally Posted By ShaneWang: The guy who just sold me the mk11 can also had it so I let him widen up my rear end a little further.  Originally Posted By ShaneWang: Originally Posted By SecretSquirell: Oh damn! Where'd you find a Premier? The guy who just sold me the mk11 can also had it so I let him widen up my rear end a little further. Fair trade. 
|
God will not look you over for medals, diplomas, or degrees – but for scars
|
Originally Posted By ShaneWang: It's getting really close to be finished. https://i.imgur.com/CJ9bIp0.jpg That is sick but I am thinking grab one of the presently available ambis to complete that and use the Vero for a MK11 time / money sink going forward - just saying... |
|
Originally Posted By AKR: That is sick but I am thinking grab one of the presently available ambis to complete that and use the Vero for a MK11 time / money sink going forward - just saying... I already secured an ambi, just gotta wait a few weeks. The vero lower actually belongs to this match rifle, I have an issued gas block, just need to get the barrel cut and reprofiled, mk11 can is pending form3 also. 
|
|
Originally Posted By 1320ydsniper: https://www.ar15.com/media/mediaFiles/286228/26C52592-D612-4B00-A440-3B2EF3481F26-2373644.jpg https://www.ar15.com/media/mediaFiles/286228/IMG_7028-2873336.jpg https://www.ar15.com/media/mediaFiles/286228/IMG_7030-2873337.jpg https://www.ar15.com/media/mediaFiles/286228/IMG_7029-2873338.jpg As much as I want to love my S&B on mine, the Mk6 just looks right on there. |
God will not look you over for medals, diplomas, or degrees – but for scars
|
Took some guns out last weekend to do some shooting at 200yd. I know that's not far for most, and definitely not far for the Mk12 or M110, but it's farther than I usually get to shoot so it was an absolute blast. The M110 was like cheating at that range. I did want to ask..what buffer springs are y'all using? I'm using a KAC M110 rifle buffer but I have just a standard AR10 spring in there. Was wondering if something a little "nicer" would be worth it. Attached File Attached File Attached File Man, I wish I could get a can but it looks like that'll likely never happen  . I'm not about to spend $7-9k on one  ETA: are there any concerns with taking the flashider off? I'm considering getting a Griffin taper mount for my F1 suppressor just so I can at least shoot this thing suppressed. I assume the muzzle is 5/8x24? |
Does this smell like chloroform to you?
|
Originally Posted By Blanco_Diablo: Took some guns out last weekend to do some shooting at 200yd. I know that's not far for most, and definitely not far for the Mk12 or M110, but it's farther than I usually get to shoot so it was an absolute blast. The M110 was like cheating at that range. I did want to ask..what buffer springs are y'all using? I'm using a KAC M110 rifle buffer but I have just a standard AR10 spring in there. Was wondering if something a little "nicer" would be worth it. https://www.ar15.com/media/mediaFiles/68140/signal-2023-07-02-12-44-36-164-5_jpg-2879618.JPG https://www.ar15.com/media/mediaFiles/68140/signal-2023-07-02-12-44-36-164-8_jpg-2879620.JPG https://www.ar15.com/media/mediaFiles/68140/20230702_104546_jpg-2879626.JPG Man, I wish I could get a can but it looks like that'll likely never happen . I'm not about to spend $7-9k on one ETA: are there any concerns with taking the flashider off? I'm considering getting a Griffin taper mount for my F1 suppressor just so I can at least shoot this thing suppressed. I assume the muzzle is 5/8x24? With the spring, I think it would be worth trying the geissele rifle spring in it. Pretty cheap but gets rid of the twang and not overly complicated like the JP offerings. I have no experience using it yet in a mk11 or m110 as my build isn't done yet. |
|
Originally Posted By Blanco_Diablo: Took some guns out last weekend to do some shooting at 200yd. I know that's not far for most, and definitely not far for the Mk12 or M110, but it's farther than I usually get to shoot so it was an absolute blast. The M110 was like cheating at that range. I did want to ask..what buffer springs are y'all using? I'm using a KAC M110 rifle buffer but I have just a standard AR10 spring in there. Was wondering if something a little "nicer" would be worth it. https://www.ar15.com/media/mediaFiles/68140/signal-2023-07-02-12-44-36-164-5_jpg-2879618.JPG https://www.ar15.com/media/mediaFiles/68140/signal-2023-07-02-12-44-36-164-8_jpg-2879620.JPG https://www.ar15.com/media/mediaFiles/68140/20230702_104546_jpg-2879626.JPG Man, I wish I could get a can but it looks like that'll likely never happen . I'm not about to spend $7-9k on one ETA: are there any concerns with taking the flashider off? I'm considering getting a Griffin taper mount for my F1 suppressor just so I can at least shoot this thing suppressed. I assume the muzzle is 5/8x24? There’s a KAC M110 spring in the EE AR10 section. I have no affliction with the seller. |
|
Anyone got a lead on where I can get this mount (LaRue LT840H 34 0 MOA)? Attached File |
|
Originally Posted By duckhook02: Anyone got a lead on where I can get this mount (LaRue LT840H 34 0 MOA)? https://www.ar15.com/media/mediaFiles/523010/yqkJGvj_jpg-2881870.JPG The USMC run LT840H-34-0 on M40A6 and Mk13 Mod7. For M110 SASS and M110K1 they run LT840H-34-20. |
2nd Battalion 9th Marines Echo Company
3rd Battalion 8th Marines India Company
3rd Battalion 8th Marines India Company
|
Originally Posted By duckhook02: Anyone got a lead on where I can get this mount (LaRue LT840H 34 0 MOA)? https://www.ar15.com/media/mediaFiles/523010/yqkJGvj_jpg-2881870.JPG Attached File |
|
Originally Posted By cmdexe: https://www.ar15.com/media/mediaFiles/265309/Screen_Shot_2023-07-11_at_10_57_09_AM_pn-2881990.JPG Originally Posted By cmdexe: Originally Posted By duckhook02: Anyone got a lead on where I can get this mount (LaRue LT840H 34 0 MOA)? https://www.ar15.com/media/mediaFiles/523010/yqkJGvj_jpg-2881870.JPG https://www.ar15.com/media/mediaFiles/265309/Screen_Shot_2023-07-11_at_10_57_09_AM_pn-2881990.JPG What glass is that? 3-20 Or ultra-short 5-25? |
God will not look you over for medals, diplomas, or degrees – but for scars
|
Originally Posted By cmdexe: USMC M8541 Schmidt Bender 3-12x50 PM II Originally Posted By cmdexe: Originally Posted By SecretSquirell: What glass is that? 3-20 Or ultra-short 5-25? USMC M8541 Schmidt Bender 3-12x50 PM II Ah. It seemed really short compared to the 5-25 I've got right now on my EMC. It damn near reaches the end of the rail. Kinda want to find something shorter (that's NOT what she said) .
|
God will not look you over for medals, diplomas, or degrees – but for scars
|
Originally Posted By SecretSquirell: Ah. It seemed really short compared to the 5-25 I've got right now on my EMC. It damn near reaches the end of the rail. Kinda want to find something shorter (that's NOT what she said) .While not clone correct, I like the idea of the new S&B Ultra Short 5-20 (I believe it's around 11.75" in overall length). |
|
Originally Posted By duckhook02: While not clone correct, I like the idea of the new S&B Ultra Short 5-20 (I believe it's around 11.75" in overall length). Originally Posted By duckhook02: Originally Posted By SecretSquirell: Ah. It seemed really short compared to the 5-25 I've got right now on my EMC. It damn near reaches the end of the rail. Kinda want to find something shorter (that's NOT what she said) .While not clone correct, I like the idea of the new S&B Ultra Short 5-20 (I believe it's around 11.75" in overall length). Same. It's even shorter than the 3-20. I talked myself out of a good deal on one at EuroOptic a while back. It was MOA and I didn't really feel like having one optic that's MOA or sending it in to get them swapped to mil. |
God will not look you over for medals, diplomas, or degrees – but for scars
|
Originally Posted By cmdexe: https://www.ar15.com/media/mediaFiles/265309/Screen_Shot_2023-07-11_at_10_57_09_AM_pn-2881990.JPG Lmao. That pic shows nothing but a dog and pony show for the higher ups. That is probably a spare gun and spare M40A6 scope in the armory that they slapped together for him to fan shoot; big telltale is rear sight in front of angle cosine indicator. Get the 20 for M110/M110K1 cause that's the correct one. If you wanna see real work gun with the correct mount here's my buddy's issued K1:   And here's hi-res of the pic above: 
|
2nd Battalion 9th Marines Echo Company
3rd Battalion 8th Marines India Company
3rd Battalion 8th Marines India Company
|
Originally Posted By MNRidesHonda: Lmao. That pic shows nothing but a dog and pony show for the higher ups. That is probably a spare gun and spare M40A6 scope in the armory that they slapped together for him to fan shoot; big telltale is rear sight in front of angle cosine indicator. Get the 20 for M110/M110K1 cause that's the correct one. If you wanna see real work gun with the correct mount here's my buddy's issued K1: https://i.imgur.com/dcRVKkV.jpg https://i.imgur.com/x9OXpr3.jpg And here's hi-res of the pic above: https://i.imgur.com/XqLFSsX.jpg You are correct the 20moa were originally used with the m8541 and m8541a on the sass and k1 as the m40a6 and mod7 already have 20 moa I believe built into the top rails, however I've seen various instances where optics and mounts are swapped quite frequently between systems, maybe intentionally or unintentionally who knows. If going with with an atacr 5-25, I'm not sure if 20moa clears on the sass, hence maybe they recycled the 0moa mounts and glass (most likely from the mod7), on the sass in this capacity as well? Attached File Attached File |
|
A little more old school - MK11 Mod 0 mount with 30 MOA Attached File |
The 2nd amendment is not just a right, it's a responsibility. So train like it...
|
Originally Posted By Fongman: A little more old school - MK11 Mod 0 mount with 30 MOA https://www.ar15.com/media/mediaFiles/20771/IMG_1988_jpg-2883230.JPG 
|
God will not look you over for medals, diplomas, or degrees – but for scars
Joined:
Jul 2023
Posts:
1
EE: 0% (0)
VA, USA
|
Originally Posted By 1320ydsniper: https://www.ar15.com/media/mediaFiles/286228/26C52592-D612-4B00-A440-3B2EF3481F26-2373644.jpg https://www.ar15.com/media/mediaFiles/286228/IMG_7028-2873336.jpg https://www.ar15.com/media/mediaFiles/286228/IMG_7030-2873337.jpg https://www.ar15.com/media/mediaFiles/286228/IMG_7029-2873338.jpg Is, or was, there an official designation of this variant? Or is this a custom configuration? Pardon my ignorance if it's common knowledge either way. The full stock with shortened barrel , married up to a full rail, but with the diving board, is kind of the perfect amalgamation of the m110 and k1 I never knew I wanted so badly. Amazing kit! |
|
Originally Posted By gunsnmammons: This thing shoots lights out. And it’s older than I am  https://i.imgur.com/Nb6Z2b9.jpeg https://i.imgur.com/pylo6Fz.jpeg Vero Beach Knight’s Armament MK11 MOD0 Is that the 15x or 22x Nightforce? I would kill for a MK11 can |
|
Originally Posted By jgarn: Is, or was, there an official designation of this variant? Or is this a custom configuration? Pardon my ignorance if it's common knowledge either way. The full stock with shortened barrel , married up to a full rail, but with the diving board, is kind of the perfect amalgamation of the m110 and k1 I never knew I wanted so badly. Amazing kit! dont think so. k1 on a regular lower. |
| Not really. |
|
Originally Posted By ShaneWang: Got the ambi lower today, still need to make some changes of the small parts on the lower for clone autism purpose, then off for cerakote. https://i.imgur.com/M0KWhgL.jpg This makes me happy.
|
God will not look you over for medals, diplomas, or degrees – but for scars
|
Originally Posted By duckhook02: Just waiting on glass at this point https://www.ar15.com/media/mediaFiles/523010/IMG_6738_jpeg-2926262.JPG  |
|
Originally Posted By duckhook02: Just waiting on glass at this point https://www.ar15.com/media/mediaFiles/523010/IMG_6738_jpeg-2926262.JPG
|
God will not look you over for medals, diplomas, or degrees – but for scars
|
Originally Posted By duckhook02: Just waiting on glass at this point https://www.ar15.com/media/mediaFiles/523010/IMG_6738_jpeg-2926262.JPG Pretty clean Delta you have there. What optic are you thinking about going with? I’ve been running a cqbss most of the time. But occasionally throw on my Mark 6 or Nightforce 4-16. 
|
|
Originally Posted By TigerHawk: Pretty clean Delta you have there. What optic are you thinking about going with? I’ve been running a cqbss most of the time. But occasionally throw on my Mark 6 or Nightforce 4-16. https://i.imgur.com/V8ODy9q.jpg Originally Posted By TigerHawk: Originally Posted By duckhook02: Just waiting on glass at this point https://www.ar15.com/media/mediaFiles/523010/IMG_6738_jpeg-2926262.JPG Pretty clean Delta you have there. What optic are you thinking about going with? I’ve been running a cqbss most of the time. But occasionally throw on my Mark 6 or Nightforce 4-16. https://i.imgur.com/V8ODy9q.jpg Awfully clean though. Needs some carbon staining. 
|
God will not look you over for medals, diplomas, or degrees – but for scars
|
Originally Posted By TigerHawk: Pretty clean Delta you have there. What optic are you thinking about going with? I’ve been running a cqbss most of the time. But occasionally throw on my Mark 6 or Nightforce 4-16. https://i.imgur.com/V8ODy9q.jpg Not clone correct, obviously, but I’m waiting on a S&B ultra short 5x20 with the tremor5 reticle. Been on order since early May and supposedly it’s in route from Germany. Also have a CQBSS but will probably throw that on the 14.5” 7.62 upper I have coming |
Joined:
Jan 2023
Posts:
111
EE: 100% (2)
TX, USA
|
Originally Posted By gunsnmammons: This thing shoots lights out. And it’s older than I am https://i.imgur.com/Nb6Z2b9.jpeg https://i.imgur.com/pylo6Fz.jpeg Vero Beach Knight’s Armament MK11 MOD0 Damn. Thanks a lot. Now I am going to have to wait no less than 20 minutes to get up from my desk so nobody sees the wood im packing under here after seeing these pics..... |
|
Originally Posted By wayfaerer320: Where does one find that M110 suppressor cover on the commercial side? Not sure what cover they are using above, but I had TAB Gear make me one for my MK11. It has worked well over the years. https://www.tabgear.com/collections/supressor-covers/products/sas1-sas2-sas3-sasr-suppressor-antimirage-shield |
The 2nd amendment is not just a right, it's a responsibility. So train like it...
|
Originally Posted By Teufelhunden1: Post up if anyone knows specifically one in photo ETA: Supp cov is from Liberty Defense Originally Posted By Teufelhunden1: Originally Posted By wayfaerer320: Where does one find that M110 suppressor cover on the commercial side? Post up if anyone knows specifically one in photo ETA: Supp cov is from Liberty Defense Jeebus, they're proud of those things. |
God will not look you over for medals, diplomas, or degrees – but for scars
|
Originally Posted By SecretSquirell: https://www.ar15.com/media/mediaFiles/204916/20230909_201743-2948448.jpg Attached File |
Let's see your Mk11, M110, and military variants (: (Page 34 of 40)
Armory Sponsor