Took the Citadel 45 colt out for it's maiden voyage. It has a threaded barrel, it is threaded .578x28 and luckily Griffen Armament makes an adapter in that size.
It is a basically a Rossi 92, made in Brazil.
Attached FileHas a gold bead front sight, the rear sight is a peep. The front gold bead is right at the top tip of the suppressor when looking through the sights. The rear sight is on ramps, the set screw clamps it down. You can see where I moved the sight and the ramps are marred up. It also printed about 3" high, but I only shot at 15 yards. One downside is the mirage through the peep sights after shooting 10 rounds or so.
Attached File Attached FileI tested 3 loads, all with 230gr V-Crowns and Alliant E3 Powder. This is a faster powder, without much pistol data. In summary, the 6.0gr load was good. I might try 6.2 or 6.3 just for a little more velocity, but the standard deviation was very nice at 6.0
Attached File