AR Sponsor
Official Mk12 Mod0, Mod1, ModH Photo and Discussion Thread (Page 447 of 1226)
|
Originally Posted By secretwheelman:
The low's won't work, you need #22M's. You can keep reading backwards, but the OP has all the info you need. Originally Posted By secretwheelman:
Originally Posted By GuynamedDave:
Right, obviously I'm leaning to the 22m, I just wanted to see if anyone knew for sure that the lows would be too low. As for te thread, I'm reading it backwards 
You can keep reading backwards, but the OP has all the info you need. I have the mediums with the swan sleeve on my mod 0 and I I was worried they would be too high. Honestly they might be slightly low haha. Medium are correct spec and highs would probably work. But start with mediums and sell on EE if you aren't happy. Your 3x9-40 is that a 1 inch tube or a proper 30mm tube? Edit because page ownage: an example of swan sleeve, mediums, and leup with 30mm tube 
|
|
Originally Posted By secretwheelman:
The low's won't work, you need #22M's. You can keep reading backwards, but the OP has all the info you need. Originally Posted By secretwheelman:
Originally Posted By GuynamedDave:
Right, obviously I'm leaning to the 22m, I just wanted to see if anyone knew for sure that the lows would be too low. As for te thread, I'm reading it backwards
You can keep reading backwards, but the OP has all the info you need. Thanks that's what I needed to know! I usually read the longer threads backwards, especially the ones that are several years old since a lot if the times the information changes and a lot of the older pictures are no longer linked to Photobucket. |
|
Originally Posted By GuynamedDave: Thanks that's what I needed to know! I usually read TD longer threads backwards, especially the ones that are several years old since a lot if the times the information changes and a lot of the older pictures are no longer linked to Photobucket. Originally Posted By GuynamedDave: Originally Posted By secretwheelman: Originally Posted By GuynamedDave: Right, obviously I'm leaning to the 22m, I just wanted to see if anyone knew for sure that the lows would be too low. As for te thread, I'm reading it backwards You can keep reading backwards, but the OP has all the info you need. Thanks that's what I needed to know! I usually read TD longer threads backwards, especially the ones that are several years old since a lot if the times the information changes and a lot of the older pictures are no longer linked to Photobucket. |
|
This place is quiet. Hopefully everyone else is at the range or out in God's country blasting away. John Adams wrote in 1776 that:
"I am apt to believe that it will be celebrated, by succeeding Generations, as the great anniversary Festival. It ought to be commemorated, as the Day of Deliverance by solemn Acts of Devotion to God Almighty. It ought to be solemnized with Pomp and Parade, with Shews, Games, Sports, GUNS, Bells, Bonfires and Illuminations from one End of this Continent to the other from this Time forward forever more...." God Bless America, and those who have served to keep it free. God Bless the MK12 Mod 0 5.56mm Special Purpose Rifle 
|
|
Went to my storage building tonight to check on my babies. Between the wife kids and building a house... I haven't seen my mk12s in a month. Sorry it was almost dark. |
OEF 10-11
|
Originally Posted By plante74: Went to my storage building tonight to check on my babies. Between the wife kids and building a house... I haven't seen my mk12s in a month. Sorry it was almost dark. https://c1.staticflickr.com/1/305/19455564951_244b8f0e46_k.jpgMk12s... by Kyle Plante, on Flickr |
|
Originally Posted By plante74:
Went to my storage building tonight to check on my babies. Between the wife kids and building a house... I haven't seen my mk12s in a month. Sorry it was almost dark. <a href="https://flic.kr/p/vDdRD2" target="_blank">https://c1.staticflickr.com/1/305/19455564951_244b8f0e46_k.jpg</a>Mk12s... by Kyle Plante, on Flickr <a href="https://flic.kr/p/vChLfA" target="_blank">https://c1.staticflickr.com/1/539/19445010782_216cc0eb84_k.jpg</a>Mk12s... by Kyle Plante, on Flickr Love the Mod 0 nice camo job Plante74. Some great paint jobs around these parts lately. Love me some MK12 mmmmm good. Still deciding what to paint her haven't made up my mind. Maybe a nice cornstalk camo job since Illinois is covered in the stuff this time of year. 
|
I have something to say!
It's better to burn out than to fade away!
It's better to burn out than to fade away!
|
Appreciate it! I really like the ergo/SOPMOD combo so that will be a no-go on the A1! It's a shooter
Originally Posted By CloneDiseased:
This. Also, were you saying A1 as in stock, grip, or lower? I like the nodak lowers and want to get one for my Mod 1 because I think the A1 lower profile completes the Mk12 look. As far as stocks/grips, it doesn't matter to me nearly as much...but the SOPMOD/CQD rear/ERGO combo is working preeeeetty nice. 
Originally Posted By CloneDiseased:
Originally Posted By MILSPEC556:
Originally Posted By secretwheelman:
+1. Thing is clean as shit tho.
|
|
From the SPR/DMR match yesterday
ModH with a KAC NT4. Sounded great 
Mod1 
There were a few more but I did not have a chance to take many photos. |
Please EMAIL instead of IM, I am not able to check IM's often.
www.gungalleryjax.com
Selling Guns, Changing People's Lives
www.gungalleryjax.com
Selling Guns, Changing People's Lives
|
Originally Posted By wayfaerer320: Refresh my memory - the KAC sling adapter (p/n 98720) is the correct issued sling adapter for a Mod 1, correct? There isn't a "correct" one. Just use whatever. I had a KAC QD mount on mine. It was also personal purchase. Most of the other guys had some redneck engineering to make a Specter Sling work. So I guess that's the "correct" method...whichever method is free  |
Uncle
Sam's
Misguided
Children
I was cloning before cloning was cool:
Mk12, Mk13, Mk18, M4 Block II
Sam's
Misguided
Children
I was cloning before cloning was cool:
Mk12, Mk13, Mk18, M4 Block II
|
Originally Posted By dangerdan: There isn't a "correct" one. Just use whatever. I had a KAC QD mount on mine. It was also personal purchase. Most of the other guys had some redneck engineering to make a Specter Sling work. So I guess that's the "correct" method...whichever method is free Originally Posted By dangerdan: Originally Posted By wayfaerer320: Refresh my memory - the KAC sling adapter (p/n 98720) is the correct issued sling adapter for a Mod 1, correct? I had a KAC QD mount on mine. It was also personal purchase. Most of the other guys had some redneck engineering to make a Specter Sling work. So I guess that's the "correct" method...whichever method is free That works for me hah. Makes sense. |
|
Originally Posted By wayfaerer320: That works for me hah. Makes sense. Originally Posted By wayfaerer320: Originally Posted By dangerdan: Originally Posted By wayfaerer320: Refresh my memory - the KAC sling adapter (p/n 98720) is the correct issued sling adapter for a Mod 1, correct? I had a KAC QD mount on mine. It was also personal purchase. Most of the other guys had some redneck engineering to make a Specter Sling work. So I guess that's the "correct" method...whichever method is free That works for me hah. Makes sense. LC Engineering  :  |
Uncle
Sam's
Misguided
Children
I was cloning before cloning was cool:
Mk12, Mk13, Mk18, M4 Block II
Sam's
Misguided
Children
I was cloning before cloning was cool:
Mk12, Mk13, Mk18, M4 Block II
|
If anyone is looking for a set of ARMS 22H rings, I have a practically brand new pair with factory packaging and the included hex key. They have lever stops and have been mounted once.
$100 shipped Here's the EE ad |
|
Originally Posted By new-arguy: Here's a few more from the SPR/DMR match ModH with KAC NT4 https://scontent-mia1-1.xx.fbcdn.net/hphotos-xpf1/t31.0-8/10983173_10154031264683136_8204739118731958477_o.jpg Mod1 with Ops 12th https://scontent-mia1-1.xx.fbcdn.net/hphotos-xpt1/t31.0-8/11700629_10154031264808136_5542185882648334977_o.jpg Mod0 https://scontent-mia1-1.xx.fbcdn.net/hphotos-xtf1/t31.0-8/11411631_10154031265058136_2612232175359016496_o.jpg Nice! |
http://www.ar15.com/forums/t_1_5/1604816_Gentle_Propositions____BOOK_IS_LIVE_ON_AMAZON___.html
Well gents, soon my Gen III will rest, and awake a Mod H. Friday was her last trip out to the range as a Mod 0 riding my SBR lower w/ALG ACT trigger, my old man and I had fun doubling up at Mk12s, getting hit strings at 750, even a few at 1000. I let dad run the early SPR and said "until later" to my original Mk12 that started this whole thing. She goes under the knife this week probably. Some wheeling and dealing will happen, and hopefully she'll reappear with a 16" BA barrel. For now, it'll wear the AAC can still since my AEM5 isn't approved and I'd rather get to shoot 2x suppressed rifles when that happens rather than trade one can around (until I get a longterm host for that SPR/M4 that is...)
 Mk12s together one last time by LanceCriminal86, on Flickr
Here's a dump of my crappy vids of the rifle, they don't do her justice. 
Her last ride:
|
|
Originally Posted By wayfaerer320:
Refresh my memory - the KAC sling adapter (p/n 98720) is the correct issued sling adapter for a Mod 1, correct? The KAC one is what's listed in the official TM when it was a SOCOM contract gun. That may have changed for the USMC guns though. I have an original Mk12 TM if there is any info you guys would like to see scanned and posted. |
|
Originally Posted By Glass1:
The KAC one is what's listed in the official TM when it was a SOCOM contract gun. That may have changed for the USMC guns though. I have an original Mk12 TM if there is any info you guys would like to see scanned and posted. Originally Posted By Glass1:
Originally Posted By wayfaerer320:
Refresh my memory - the KAC sling adapter (p/n 98720) is the correct issued sling adapter for a Mod 1, correct? The KAC one is what's listed in the official TM when it was a SOCOM contract gun. That may have changed for the USMC guns though. I have an original Mk12 TM if there is any info you guys would like to see scanned and posted. Yes please :) |
|
Originally Posted By Glass1:
The KAC one is what's listed in the official TM when it was a SOCOM contract gun. That may have changed for the USMC guns though. I have an original Mk12 TM if there is any info you guys would like to see scanned and posted. Originally Posted By Glass1:
Originally Posted By wayfaerer320:
Refresh my memory - the KAC sling adapter (p/n 98720) is the correct issued sling adapter for a Mod 1, correct? The KAC one is what's listed in the official TM when it was a SOCOM contract gun. That may have changed for the USMC guns though. I have an original Mk12 TM if there is any info you guys would like to see scanned and posted. Yes. |
Sheep, Sheepdog or Wolf? What are you?
Spent July 4th weekend with RTUtah and our buddy Clay. Had a blast shooting with them and drinking with RTUtah. Definitely an awesome deployment send off for me 
RTUtah's Mod1 
RTUtah's Holland 
Sensei RTUtah behind the Holland
Sensei RTUtah handling out hammer-pairs with the Holland
Clay behind his Remington 700 AAC-SD on McMillan A5 fully adjustable stock 
And I brought my Izzy TIGR out of the safe
Fun times! Can't wait to come back from deployment to hangout with these guys again
|
~2nd Battalion, 9th Marines~
13 July 2007 -- 01 April 2015
13 July 2007 -- 01 April 2015
|
Originally Posted By ArmedFerret:
I should be due back from TX around the same time, so hit me up and I'll make the drive from MDstan.  Originally Posted By ArmedFerret:
Originally Posted By MNRidesHonda:
Fun times! Can't wait to come back from deployment to hangout with these guys again I should be due back from TX around the same time, so hit me up and I'll make the drive from MDstan. Okay! I'll be back in CONUS the end of February '16 at the latest. I'll make sure get RTUtah to organize a mini Mk12 shoot
|
~2nd Battalion, 9th Marines~
13 July 2007 -- 01 April 2015
13 July 2007 -- 01 April 2015
|
Originally Posted By MNRidesHonda: Spent July 4th weekend with RTUtah and our buddy Clay. Had a blast shooting with them and drinking with RTUtah. Definitely an awesome deployment send off for me RTUtah's Mod1 http://imagizer.imageshack.us/v2/1280x1024q90/913/yP93Tu.jpg RTUtah's Holland http://imagizer.imageshack.us/v2/1280x1024q90/540/gGL07u.jpg Sensei RTUtah behind the Holland  https://youtu.be/7GFVC68GGogSensei RTUtah handling out hammer-pairs with the Holland https://youtu.be/arqiwD2bTVIClay behind his Remington 700 AAC-SD on McMillan A5 fully adjustable stock https://youtu.be/QXDEJePouAMAnd I brought my Izzy TIGR out of the safe https://youtu.be/SmS8HXlJB7k https://youtu.be/2HFscsNYObcFun times! Can't wait to come back from deployment to hangout with these guys again So much awesome in one post |
|
Originally Posted By MNRidesHonda: Spent July 4th weekend with RTUtah and our buddy Clay. Had a blast shooting with them and drinking with RTUtah. Definitely an awesome deployment send off for me RTUtah's Mod1 http://imagizer.imageshack.us/v2/1280x1024q90/913/yP93Tu.jpg RTUtah's Holland http://imagizer.imageshack.us/v2/1280x1024q90/540/gGL07u.jpg Sensei RTUtah behind the Holland https://youtu.be/7GFVC68GGogSensei RTUtah handling out hammer-pairs with the Holland https://youtu.be/arqiwD2bTVIClay behind his Remington 700 AAC-SD on McMillan A5 fully adjustable stock https://youtu.be/QXDEJePouAMAnd I brought my Izzy TIGR out of the safe https://youtu.be/SmS8HXlJB7k https://youtu.be/2HFscsNYObcFun times! Can't wait to come back from deployment to hangout with these guys again Had an AWESOME time, brother. Bummed I forgot the damn turret and hex-key for the Mod1.  |
http://www.ar15.com/forums/t_1_5/1604816_Gentle_Propositions____BOOK_IS_LIVE_ON_AMAZON___.html
Off the record, I love your new bangs, Mrs. Obama
Joined:
Jan 2010
Posts:
4799
EE: 100% (725)
OR, USA
|
Originally Posted By wayfaerer320:
This rifle is the bee's knees with the AEM5 - really becoming the favorite in my collection: http://i1081.photobucket.com/albums/j352/javaman85/P1010439_zps5jq1gnjk.jpg http://i1081.photobucket.com/albums/j352/javaman85/P1010437_zpsrh7sx8nl.jpg http://i1081.photobucket.com/albums/j352/javaman85/P1010433_zpsqdbfsrd9.jpg How much $$$ you want for the KAC taupe panels? For reals... |
|
Originally Posted By Glass1:
Figured I'd post another pic of a Holland. This is a rare example of one with the iron sights mounted. https://www.badgerordnance.com/wp-content/uploads/2015/07/Holland2b.jpg (Utah, you have a PM.) Awesome. |
|
Originally Posted By Glass1:
Figured I'd post another pic of a Holland. This is a rare example of one with the iron sights mounted. https://www.badgerordnance.com/wp-content/uploads/2015/07/Holland2b.jpg (Utah, you have a PM.) Which SOCOM stock is that? Short or long? |
There are enough people in the world who could benefit from a good asswhipping that there was no need to be unpleasant to nice people.
|
Originally Posted By Dejavu:
Which SOCOM stock is that? Short or long? Originally Posted By Dejavu:
Originally Posted By Glass1:
Figured I'd post another pic of a Holland. This is a rare example of one with the iron sights mounted. https://www.badgerordnance.com/wp-content/uploads/2015/07/Holland2b.jpg (Utah, you have a PM.) Which SOCOM stock is that? Short or long? Carbine(Short) Correct MOD H stock 
Rifle(Long) 
|
|
Originally Posted By Glass1:
Figured I'd post another pic of a Holland. This is a rare example of one with the iron sights mounted. https://www.badgerordnance.com/wp-content/uploads/2015/07/Holland2b.jpg (Utah, you have a PM.) Is that a PRI RECCE rail? Were any other rails used on Hollands? |
|
Due to some changes in life I posted my mk12mod0 up fs on snipershide. I've owned it for a few years and it has been a safe queen. It was supposably built by someone who worked at crane and I picked it up on the hide, as it was turn key..... looking to get back what I have invested.
link http://www.scout.com/military/snipers-hide/forums/5552-firearms-px/13937322-mk12-mod0/ms/172400805 |
|
Originally Posted By JAR-SPR:
Is that a PRI RECCE rail? Were any other rails used on Hollands? Originally Posted By JAR-SPR:
Originally Posted By Glass1:
Figured I'd post another pic of a Holland. This is a rare example of one with the iron sights mounted. https://www.badgerordnance.com/wp-content/uploads/2015/07/Holland2b.jpg (Utah, you have a PM.) Is that a PRI RECCE rail? Were any other rails used on Hollands? Yes. Lots of MOD Hs in pics have had the Recce rail. 
|
|
Originally Posted By ankratz: How much $$$ you want for the KAC taupe panels? For reals... Originally Posted By ankratz: Originally Posted By wayfaerer320: This rifle is the bee's knees with the AEM5 - really becoming the favorite in my collection: http://i1081.photobucket.com/albums/j352/javaman85/P1010439_zps5jq1gnjk.jpg http://i1081.photobucket.com/albums/j352/javaman85/P1010437_zpsrh7sx8nl.jpg http://i1081.photobucket.com/albums/j352/javaman85/P1010433_zpsqdbfsrd9.jpg How much $$$ you want for the KAC taupe panels? For reals... Just picked them up the other day - OperationParts has them. Of course, like anything KAC, they're ridiculously expensive. |
|
Originally Posted By JAR-SPR:
Is that a PRI RECCE rail? Were any other rails used on Hollands? Originally Posted By JAR-SPR:
Originally Posted By Glass1:
Figured I'd post another pic of a Holland. This is a rare example of one with the iron sights mounted. https://www.badgerordnance.com/wp-content/uploads/2015/07/Holland2b.jpg (Utah, you have a PM.) Is that a PRI RECCE rail? Were any other rails used on Hollands? The PRI Recce was the solution for the Mod Holland since the ARMS Swan Sleeve was discarded. Although they were provided for each Mod Holland not all individuals chose to use the Recce Rail, with the Larue SPR being a common alternative. I've seen both SPR-S and SPR-1.5 used. The vast majority of the ones I've seen have retained the Recce Rail in conjunction with a handful of different ring options. (ARMS #22M from the Mod 0s, NF rings that came off of other guns, PRI rings, Badger Ordnance, etc.) |
|
Originally Posted By Glass1:
The PRI Recce was the solution for the Mod Holland since the ARMS Swan Sleeve was discarded. Although they were provided for each Mod Holland not all individuals chose to use the Recce Rail, with the Larue SPR being a common alternative. I've seen both SPR-S and SPR-1.5 used. The vast majority of the ones I've seen have retained the Recce Rail in conjunction with a handful of different ring options. (ARMS #22M from the Mod 0s, NF rings that came off of other guns, PRI rings, Badger Ordnance, etc.) Originally Posted By Glass1:
Originally Posted By JAR-SPR:
Originally Posted By Glass1:
Figured I'd post another pic of a Holland. This is a rare example of one with the iron sights mounted. https://www.badgerordnance.com/wp-content/uploads/2015/07/Holland2b.jpg (Utah, you have a PM.) Is that a PRI RECCE rail? Were any other rails used on Hollands? The PRI Recce was the solution for the Mod Holland since the ARMS Swan Sleeve was discarded. Although they were provided for each Mod Holland not all individuals chose to use the Recce Rail, with the Larue SPR being a common alternative. I've seen both SPR-S and SPR-1.5 used. The vast majority of the ones I've seen have retained the Recce Rail in conjunction with a handful of different ring options. (ARMS #22M from the Mod 0s, NF rings that came off of other guns, PRI rings, Badger Ordnance, etc.) Thanks to everyone for the info! As for iron sights, were the PRI/ARMS flip ups the only ones used? |
|
Originally Posted By JAR-SPR:
Thanks to everyone for the info! As for iron sights, were the PRI/ARMS flip ups the only ones used? The PRI front was provided with the Holland and the rear was the retained ARMS #40 from the Mod 0. While its possible some personally purchased iron sights may have ended up on Hollands, I've only seen two examples with iron sights actually mounted (including this photo). |
Official Mk12 Mod0, Mod1, ModH Photo and Discussion Thread (Page 447 of 1226)
AR Sponsor