AR Sponsor
Official Mk12 Mod0, Mod1, ModH Photo and Discussion Thread (Page 1219 of 1226)
Joined:
Jan 2025
Posts:
1140
EE: 100% (1)
FL, USA
|
Originally Posted By AZ_SBR: NOS Insight PEQ-2A from 2006. https://live.staticflickr.com/65535/54896486925_966181c645_c.jpg https://live.staticflickr.com/65535/54896430079_0b8bd349a7_c.jpg https://live.staticflickr.com/65535/54896486930_376fa3c001_c.jpg https://live.staticflickr.com/65535/54896416668_d3d9e5465f_c.jpg https://live.staticflickr.com/65535/54896486965_c38b649dac_c.jpg nice score! I'll take that LMT grip off your hands if you decide to swap it out |
|
Originally Posted By officerX: I've come to make atonement for my sins of many years ago (01/09/2019). (This is the only pic that still exists, and for good reason) https://www.ar15.com/media/mediaFiles/335460/gross-3670657.jpg To: J_MONEY cjwwd2 cdholmes WTFShane RTUtah ArmedFerret usnguns and anyone else I personally offended and to the cloner community as a whole, I’M SORRY! I hope this MK12 Mod H build will redeem me. https://www.ar15.com/media/mediaFiles/335460/IMG_0525-3670659.jpg Hydra-Matic Div. G.M. Corp. marked lower by IntlMilCo IntlMilCo LPK SSA-E trigger Stamped C keyhole Colt upper Old Colt BCG PRI military latch CH Noveske Mod H barrel LMT SOPMOD gen 1 stock PRI gen 3 tube Leupold Mark 4 3-10x40mm LR/t FDE M2 Turrets LaRue mount AEM5 can Atlas BT10 bipod  I’m honored to even be mentioned here  That’s a nice Mod H. I’m not much in the clone game anymore, but it does beckon to me from time to time. |
Put together a few more pics of the completed Mk12 Mod 1 build. I think this is as close as I think I can get it short of a transferable H&R M16A1 lower -- I’d like to do that somewhere down the line. I was fortunate enough to secure an Intl Mil Co H&R M16A1 lower in batch 1 about 5 years ago. I had originally planned on building it into an M16A1 clone but stumbled upon this thread and started on a Mod 1 instead.  Parts list: Lower: Intl Mil Co H&R M16A1 lower Original H&R lower parts kit w/ dimpled pivot and takedown pins NOS government contract Knight's 2-stage adjustable match trigger NOS Colt M16A2 grip Original M16A1 buffer tube and screw Original H&R M16A1 buffer w/ heavy machining marks on the face NOS M16A1 type E stock Upper: Colt M4 flat top upper w/keyhole forge mark/stamped C NOS Colt M16 BCG Old production laser marked PRI Gasbuster charging handle with cutout, patented, parkerized latch instead of nitrided, no production letter code, ‘www.pri-mounts.com’ Issued 2007 USMC rev 3 takeoff barrel Takeoff parkerized Crane Mk12 gas block Original Ops Inc manufactured brake and collar 2006-2007 transitional KAC 5.56 M-4 Match (FF) RAS, Titusville, FL (321) 607-9900 NOS KAC 600m rear sight, first pattern, long clamp NOS KAC front sight, unmarked, second pattern, long clamp Unmarked KAC sling adapter, slotted screw, long clamp, early swivel KAC RAS bipod adapter, first pattern, no NSN, logo on bottom, long clamp ~2008 production Harris BRM-S 6-9" bipod 2008 dated gen 1 KMW Pod Loc Issued 2007 dated Leupold Mk4 MR/T 2.5-8x36mm, M2 turrets with Mk262 BDC, illuminated TMR reticle Issued ARMS #22 H rings, old pattern with no lever stops NOS 2006 dated Butler Creek front/rear scope covers Ops Inc 12th model suppressor, 5XXX serial block that matches deployment case Deployment Kit: 2006 dated USMC-issued Pelican 1700 case serialized to an H&R M16A1 lower Issued Otis M4/M16 5.56 cleaning kit (black, NSN marked) NOS KAC broom handle grip Original USMC issued Mk12 Mod 1 operator's manual NOS early Mildot Master (registered trademark, patent 5960576 & 6196455, “WWW.MILDOT.COM/MADE IN U.S.A.) and large instruction manual Reproduction USMC round count log (Modern Arm Resources) Reproduction Materiel tag (Modern Arm Resources) 2004 DeltaMax rev. 2 Ballisticard (Modern Arm Resources) Reproduction 22CF-30 Dewey rod (Modern Arm Resources) Reproduction bore guide (Modern Arm Resources) NOS Eagle TAS-1 sling w/ UMSS adapter NOS Uncle Mike’s sling swivel       Thanks to Chris at Intl Mil Co, wakebrdr142, Engineer5, PerfectTurn, ringer706, and all the other folks here who helped me put this together over the last few years. Still shoots pretty good with the takeoff barrel. 
|
|
Originally Posted By Svensson: Put together a few more pics of the completed Mk12 Mod 1 build. I think this is as close as I think I can get it short of a transferable H&R M16A1 lower -- I’d like to do that somewhere down the line. I was fortunate enough to secure an Intl Mil Co H&R M16A1 lower in batch 1 about 5 years ago. I had originally planned on building it into an M16A1 clone but stumbled upon this thread and started on a Mod 1 instead. https://i.imgur.com/fKQSs3f.jpeg Parts list: Lower: Intl Mil Co H&R M16A1 lower Original H&R lower parts kit w/ dimpled pivot and takedown pins NOS government contract Knight's 2-stage adjustable match trigger NOS Colt M16A2 grip Original M16A1 buffer tube and screw Original H&R M16A1 buffer w/ heavy machining marks on the face NOS M16A1 type E stock Upper: Colt M4 flat top upper w/keyhole forge mark/stamped C NOS Colt M16 BCG Old production laser marked PRI Gasbuster charging handle with cutout, patented, parkerized latch instead of nitrided, no production letter code, ‘www.pri-mounts.com’ Issued 2007 USMC rev 3 takeoff barrel Takeoff parkerized Crane Mk12 gas block Original Ops Inc manufactured brake and collar 2006-2007 transitional KAC 5.56 M-4 Match (FF) RAS, Titusville, FL (321) 607-9900 NOS KAC 600m rear sight, first pattern, long clamp NOS KAC front sight, unmarked, second pattern, long clamp Unmarked KAC sling adapter, slotted screw, long clamp, early swivel KAC RAS bipod adapter, first pattern, no NSN, logo on bottom, long clamp ~2008 production Harris BRM-S 6-9" bipod 2008 dated gen 1 KMW Pod Loc Issued 2007 dated Leupold Mk4 MR/T 2.5-8x36mm, M2 turrets with Mk262 BDC, illuminated TMR reticle Issued ARMS #22 H rings, old pattern with no lever stops NOS 2006 dated Butler Creek front/rear scope covers Ops Inc 12th model suppressor, 5XXX serial block that matches deployment case Deployment Kit: 2006 dated USMC-issued Pelican 1700 case serialized to an H&R M16A1 lower Issued Otis M4/M16 5.56 cleaning kit (black, NSN marked) NOS KAC broom handle grip Original USMC issued Mk12 Mod 1 operator's manual NOS early Mildot Master (registered trademark, patent 5960576 & 6196455, “WWW.MILDOT.COM/MADE IN U.S.A.) and large instruction manual Reproduction USMC round count log (Modern Arm Resources) Reproduction Materiel tag (Modern Arm Resources) 2004 DeltaMax rev. 2 Ballisticard (Modern Arm Resources) Reproduction 22CF-30 Dewey rod (Modern Arm Resources) Reproduction bore guide (Modern Arm Resources) NOS Eagle TAS-1 sling w/ UMSS adapter NOS Uncle Mike’s sling swivel https://i.imgur.com/AN8hG2zh.jpeg https://i.imgur.com/kF51rKBh.jpeg https://i.imgur.com/ZKzKzzxh.jpeg https://i.imgur.com/w0QDZS0h.jpeg https://i.imgur.com/yxWmPVnh.jpeg https://i.imgur.com/n5oZBgvh.jpeg Thanks to Chris at Intl Mil Co, wakebrdr142, Engineer5, PerfectTurn, ringer706, and all the other folks here who helped me put this together over the last few years. Still shoots pretty good with the takeoff barrel. https://i.imgur.com/JTTsYn2h.jpeg  You get my vote for best build/kit in this entire thread.
|
-Things do not happen. Things are made to happen. -JFK
-Beware the fury of a patient man.
-Thousands and thousands of laws....All for just ten commandments.
-"alot" is not a word.
-Beware the fury of a patient man.
-Thousands and thousands of laws....All for just ten commandments.
-"alot" is not a word.
|
Originally Posted By Svensson: Put together a few more pics of the completed Mk12 Mod 1 build. I think this is as close as I think I can get it short of a transferable H&R M16A1 lower -- I’d like to do that somewhere down the line. I was fortunate enough to secure an Intl Mil Co H&R M16A1 lower in batch 1 about 5 years ago. I had originally planned on building it into an M16A1 clone but stumbled upon this thread and started on a Mod 1 instead. https://i.imgur.com/fKQSs3f.jpeg Parts list: Lower: Intl Mil Co H&R M16A1 lower Original H&R lower parts kit w/ dimpled pivot and takedown pins NOS government contract Knight's 2-stage adjustable match trigger NOS Colt M16A2 grip Original M16A1 buffer tube and screw Original H&R M16A1 buffer w/ heavy machining marks on the face NOS M16A1 type E stock Upper: Colt M4 flat top upper w/keyhole forge mark/stamped C NOS Colt M16 BCG Old production laser marked PRI Gasbuster charging handle with cutout, patented, parkerized latch instead of nitrided, no production letter code, ‘www.pri-mounts.com’ Issued 2007 USMC rev 3 takeoff barrel Takeoff parkerized Crane Mk12 gas block Original Ops Inc manufactured brake and collar 2006-2007 transitional KAC 5.56 M-4 Match (FF) RAS, Titusville, FL (321) 607-9900 NOS KAC 600m rear sight, first pattern, long clamp NOS KAC front sight, unmarked, second pattern, long clamp Unmarked KAC sling adapter, slotted screw, long clamp, early swivel KAC RAS bipod adapter, first pattern, no NSN, logo on bottom, long clamp ~2008 production Harris BRM-S 6-9" bipod 2008 dated gen 1 KMW Pod Loc Issued 2007 dated Leupold Mk4 MR/T 2.5-8x36mm, M2 turrets with Mk262 BDC, illuminated TMR reticle Issued ARMS #22 H rings, old pattern with no lever stops NOS 2006 dated Butler Creek front/rear scope covers Ops Inc 12th model suppressor, 5XXX serial block that matches deployment case Deployment Kit: 2006 dated USMC-issued Pelican 1700 case serialized to an H&R M16A1 lower Issued Otis M4/M16 5.56 cleaning kit (black, NSN marked) NOS KAC broom handle grip Original USMC issued Mk12 Mod 1 operator's manual NOS early Mildot Master (registered trademark, patent 5960576 & 6196455, “WWW.MILDOT.COM/MADE IN U.S.A.) and large instruction manual Reproduction USMC round count log (Modern Arm Resources) Reproduction Materiel tag (Modern Arm Resources) 2004 DeltaMax rev. 2 Ballisticard (Modern Arm Resources) Reproduction 22CF-30 Dewey rod (Modern Arm Resources) Reproduction bore guide (Modern Arm Resources) NOS Eagle TAS-1 sling w/ UMSS adapter NOS Uncle Mike’s sling swivel https://i.imgur.com/AN8hG2zh.jpeg https://i.imgur.com/kF51rKBh.jpeg https://i.imgur.com/ZKzKzzxh.jpeg https://i.imgur.com/w0QDZS0h.jpeg https://i.imgur.com/yxWmPVnh.jpeg https://i.imgur.com/n5oZBgvh.jpeg Thanks to Chris at Intl Mil Co, wakebrdr142, Engineer5, PerfectTurn, ringer706, and all the other folks here who helped me put this together over the last few years. Still shoots pretty good with the takeoff barrel. https://i.imgur.com/JTTsYn2h.jpeg Well done, sir. The attention to detail, and calling out those that helped, is fist class. Happy to see it shoots as well as it looks. Pic of a Mod H under thermal for Mk 12 thread Attached File |
|
Originally Posted By Svensson: Put together a few more pics of the completed Mk12 Mod 1 build. I think this is as close as I think I can get it short of a transferable H&R M16A1 lower -- I’d like to do that somewhere down the line. I was fortunate enough to secure an Intl Mil Co H&R M16A1 lower in batch 1 about 5 years ago. I had originally planned on building it into an M16A1 clone but stumbled upon this thread and started on a Mod 1 instead. https://i.imgur.com/fKQSs3f.jpeg Parts list: Lower: Intl Mil Co H&R M16A1 lower Original H&R lower parts kit w/ dimpled pivot and takedown pins NOS government contract Knight's 2-stage adjustable match trigger NOS Colt M16A2 grip Original M16A1 buffer tube and screw Original H&R M16A1 buffer w/ heavy machining marks on the face NOS M16A1 type E stock Upper: Colt M4 flat top upper w/keyhole forge mark/stamped C NOS Colt M16 BCG Old production laser marked PRI Gasbuster charging handle with cutout, patented, parkerized latch instead of nitrided, no production letter code, ‘www.pri-mounts.com’ Issued 2007 USMC rev 3 takeoff barrel Takeoff parkerized Crane Mk12 gas block Original Ops Inc manufactured brake and collar 2006-2007 transitional KAC 5.56 M-4 Match (FF) RAS, Titusville, FL (321) 607-9900 NOS KAC 600m rear sight, first pattern, long clamp NOS KAC front sight, unmarked, second pattern, long clamp Unmarked KAC sling adapter, slotted screw, long clamp, early swivel KAC RAS bipod adapter, first pattern, no NSN, logo on bottom, long clamp ~2008 production Harris BRM-S 6-9" bipod 2008 dated gen 1 KMW Pod Loc Issued 2007 dated Leupold Mk4 MR/T 2.5-8x36mm, M2 turrets with Mk262 BDC, illuminated TMR reticle Issued ARMS #22 H rings, old pattern with no lever stops NOS 2006 dated Butler Creek front/rear scope covers Ops Inc 12th model suppressor, 5XXX serial block that matches deployment case Deployment Kit: 2006 dated USMC-issued Pelican 1700 case serialized to an H&R M16A1 lower Issued Otis M4/M16 5.56 cleaning kit (black, NSN marked) NOS KAC broom handle grip Original USMC issued Mk12 Mod 1 operator's manual NOS early Mildot Master (registered trademark, patent 5960576 & 6196455, “WWW.MILDOT.COM/MADE IN U.S.A.) and large instruction manual Reproduction USMC round count log (Modern Arm Resources) Reproduction Materiel tag (Modern Arm Resources) 2004 DeltaMax rev. 2 Ballisticard (Modern Arm Resources) Reproduction 22CF-30 Dewey rod (Modern Arm Resources) Reproduction bore guide (Modern Arm Resources) NOS Eagle TAS-1 sling w/ UMSS adapter NOS Uncle Mike’s sling swivel https://i.imgur.com/AN8hG2zh.jpeg https://i.imgur.com/kF51rKBh.jpeg https://i.imgur.com/ZKzKzzxh.jpeg https://i.imgur.com/w0QDZS0h.jpeg https://i.imgur.com/yxWmPVnh.jpeg https://i.imgur.com/n5oZBgvh.jpeg Thanks to Chris at Intl Mil Co, wakebrdr142, Engineer5, PerfectTurn, ringer706, and all the other folks here who helped me put this together over the last few years. Still shoots pretty good with the takeoff barrel. https://i.imgur.com/JTTsYn2h.jpeg Now that's a fuckin clone. Gorgeous build and shoots like a dream. What ammo was that group with? P.S. whatever you do, don't paint it :D |
FBHO
|
Originally Posted By ArpaioFan: Now that's a fuckin clone. Gorgeous build and shoots like a dream. What ammo was that group with? P.S. whatever you do, don't paint it :D Originally Posted By ArpaioFan: Originally Posted By Svensson: Put together a few more pics of the completed Mk12 Mod 1 build. I think this is as close as I think I can get it short of a transferable H&R M16A1 lower -- I’d like to do that somewhere down the line. I was fortunate enough to secure an Intl Mil Co H&R M16A1 lower in batch 1 about 5 years ago. I had originally planned on building it into an M16A1 clone but stumbled upon this thread and started on a Mod 1 instead. https://i.imgur.com/fKQSs3f.jpeg Parts list: Lower: Intl Mil Co H&R M16A1 lower Original H&R lower parts kit w/ dimpled pivot and takedown pins NOS government contract Knight's 2-stage adjustable match trigger NOS Colt M16A2 grip Original M16A1 buffer tube and screw Original H&R M16A1 buffer w/ heavy machining marks on the face NOS M16A1 type E stock Upper: Colt M4 flat top upper w/keyhole forge mark/stamped C NOS Colt M16 BCG Old production laser marked PRI Gasbuster charging handle with cutout, patented, parkerized latch instead of nitrided, no production letter code, ‘www.pri-mounts.com’ Issued 2007 USMC rev 3 takeoff barrel Takeoff parkerized Crane Mk12 gas block Original Ops Inc manufactured brake and collar 2006-2007 transitional KAC 5.56 M-4 Match (FF) RAS, Titusville, FL (321) 607-9900 NOS KAC 600m rear sight, first pattern, long clamp NOS KAC front sight, unmarked, second pattern, long clamp Unmarked KAC sling adapter, slotted screw, long clamp, early swivel KAC RAS bipod adapter, first pattern, no NSN, logo on bottom, long clamp ~2008 production Harris BRM-S 6-9" bipod 2008 dated gen 1 KMW Pod Loc Issued 2007 dated Leupold Mk4 MR/T 2.5-8x36mm, M2 turrets with Mk262 BDC, illuminated TMR reticle Issued ARMS #22 H rings, old pattern with no lever stops NOS 2006 dated Butler Creek front/rear scope covers Ops Inc 12th model suppressor, 5XXX serial block that matches deployment case Deployment Kit: 2006 dated USMC-issued Pelican 1700 case serialized to an H&R M16A1 lower Issued Otis M4/M16 5.56 cleaning kit (black, NSN marked) NOS KAC broom handle grip Original USMC issued Mk12 Mod 1 operator's manual NOS early Mildot Master (registered trademark, patent 5960576 & 6196455, “WWW.MILDOT.COM/MADE IN U.S.A.) and large instruction manual Reproduction USMC round count log (Modern Arm Resources) Reproduction Materiel tag (Modern Arm Resources) 2004 DeltaMax rev. 2 Ballisticard (Modern Arm Resources) Reproduction 22CF-30 Dewey rod (Modern Arm Resources) Reproduction bore guide (Modern Arm Resources) NOS Eagle TAS-1 sling w/ UMSS adapter NOS Uncle Mike’s sling swivel https://i.imgur.com/AN8hG2zh.jpeg https://i.imgur.com/kF51rKBh.jpeg https://i.imgur.com/ZKzKzzxh.jpeg https://i.imgur.com/w0QDZS0h.jpeg https://i.imgur.com/yxWmPVnh.jpeg https://i.imgur.com/n5oZBgvh.jpeg Thanks to Chris at Intl Mil Co, wakebrdr142, Engineer5, PerfectTurn, ringer706, and all the other folks here who helped me put this together over the last few years. Still shoots pretty good with the takeoff barrel. https://i.imgur.com/JTTsYn2h.jpeg Now that's a fuckin clone. Gorgeous build and shoots like a dream. What ammo was that group with? P.S. whatever you do, don't paint it :D Don’t listen to this guy. Rattle can up!  Attached File |
|
Originally Posted By ArpaioFan: Now that's a fuckin clone. Gorgeous build and shoots like a dream. What ammo was that group with? P.S. whatever you do, don't paint it :D Originally Posted By ArpaioFan: Originally Posted By Svensson: Put together a few more pics of the completed Mk12 Mod 1 build. I think this is as close as I think I can get it short of a transferable H&R M16A1 lower -- I’d like to do that somewhere down the line. I was fortunate enough to secure an Intl Mil Co H&R M16A1 lower in batch 1 about 5 years ago. I had originally planned on building it into an M16A1 clone but stumbled upon this thread and started on a Mod 1 instead. https://i.imgur.com/fKQSs3f.jpeg Parts list: Lower: Intl Mil Co H&R M16A1 lower Original H&R lower parts kit w/ dimpled pivot and takedown pins NOS government contract Knight's 2-stage adjustable match trigger NOS Colt M16A2 grip Original M16A1 buffer tube and screw Original H&R M16A1 buffer w/ heavy machining marks on the face NOS M16A1 type E stock Upper: Colt M4 flat top upper w/keyhole forge mark/stamped C NOS Colt M16 BCG Old production laser marked PRI Gasbuster charging handle with cutout, patented, parkerized latch instead of nitrided, no production letter code, ‘www.pri-mounts.com’ Issued 2007 USMC rev 3 takeoff barrel Takeoff parkerized Crane Mk12 gas block Original Ops Inc manufactured brake and collar 2006-2007 transitional KAC 5.56 M-4 Match (FF) RAS, Titusville, FL (321) 607-9900 NOS KAC 600m rear sight, first pattern, long clamp NOS KAC front sight, unmarked, second pattern, long clamp Unmarked KAC sling adapter, slotted screw, long clamp, early swivel KAC RAS bipod adapter, first pattern, no NSN, logo on bottom, long clamp ~2008 production Harris BRM-S 6-9" bipod 2008 dated gen 1 KMW Pod Loc Issued 2007 dated Leupold Mk4 MR/T 2.5-8x36mm, M2 turrets with Mk262 BDC, illuminated TMR reticle Issued ARMS #22 H rings, old pattern with no lever stops NOS 2006 dated Butler Creek front/rear scope covers Ops Inc 12th model suppressor, 5XXX serial block that matches deployment case Deployment Kit: 2006 dated USMC-issued Pelican 1700 case serialized to an H&R M16A1 lower Issued Otis M4/M16 5.56 cleaning kit (black, NSN marked) NOS KAC broom handle grip Original USMC issued Mk12 Mod 1 operator's manual NOS early Mildot Master (registered trademark, patent 5960576 & 6196455, “WWW.MILDOT.COM/MADE IN U.S.A.) and large instruction manual Reproduction USMC round count log (Modern Arm Resources) Reproduction Materiel tag (Modern Arm Resources) 2004 DeltaMax rev. 2 Ballisticard (Modern Arm Resources) Reproduction 22CF-30 Dewey rod (Modern Arm Resources) Reproduction bore guide (Modern Arm Resources) NOS Eagle TAS-1 sling w/ UMSS adapter NOS Uncle Mike’s sling swivel https://i.imgur.com/AN8hG2zh.jpeg https://i.imgur.com/kF51rKBh.jpeg https://i.imgur.com/ZKzKzzxh.jpeg https://i.imgur.com/w0QDZS0h.jpeg https://i.imgur.com/yxWmPVnh.jpeg https://i.imgur.com/n5oZBgvh.jpeg Thanks to Chris at Intl Mil Co, wakebrdr142, Engineer5, PerfectTurn, ringer706, and all the other folks here who helped me put this together over the last few years. Still shoots pretty good with the takeoff barrel. https://i.imgur.com/JTTsYn2h.jpeg Now that's a fuckin clone. Gorgeous build and shoots like a dream. What ammo was that group with? P.S. whatever you do, don't paint it :D 
|
God will not look you over for medals, diplomas, or degrees – but for scars
|
Originally Posted By ArpaioFan: Now that's a fuckin clone. Gorgeous build and shoots like a dream. What ammo was that group with? P.S. whatever you do, don't paint it :D IMI 77gr SMK is my go to. Always had good consistent groups with it. This one won’t get painted since it wouldn’t match my reference pics. But I am working on painting the SPR lower to match the issued upper, so it will be in good company. |
Member
Joined:
Feb 2023
Posts:
516
EE: 100% (3)
PA, USA
|
Originally Posted By Svensson: Put together a few more pics of the completed Mk12 Mod 1 build. I think this is as close as I think I can get it short of a transferable H&R M16A1 lower -- I'd like to do that somewhere down the line. I was fortunate enough to secure an Intl Mil Co H&R M16A1 lower in batch 1 about 5 years ago. I had originally planned on building it into an M16A1 clone but stumbled upon this thread and started on a Mod 1 instead. https://i.imgur.com/fKQSs3f.jpeg Parts list: Lower: Intl Mil Co H&R M16A1 lower Original H&R lower parts kit w/ dimpled pivot and takedown pins NOS government contract Knight's 2-stage adjustable match trigger NOS Colt M16A2 grip Original M16A1 buffer tube and screw Original H&R M16A1 buffer w/ heavy machining marks on the face NOS M16A1 type E stock Upper: Colt M4 flat top upper w/keyhole forge mark/stamped C NOS Colt M16 BCG Old production laser marked PRI Gasbuster charging handle with cutout, patented, parkerized latch instead of nitrided, no production letter code, 'www.pri-mounts.com' Issued 2007 USMC rev 3 takeoff barrel Takeoff parkerized Crane Mk12 gas block Original Ops Inc manufactured brake and collar 2006-2007 transitional KAC 5.56 M-4 Match (FF) RAS, Titusville, FL (321) 607-9900 NOS KAC 600m rear sight, first pattern, long clamp NOS KAC front sight, unmarked, second pattern, long clamp Unmarked KAC sling adapter, slotted screw, long clamp, early swivel KAC RAS bipod adapter, first pattern, no NSN, logo on bottom, long clamp ~2008 production Harris BRM-S 6-9" bipod 2008 dated gen 1 KMW Pod Loc Issued 2007 dated Leupold Mk4 MR/T 2.5-8x36mm, M2 turrets with Mk262 BDC, illuminated TMR reticle Issued ARMS #22 H rings, old pattern with no lever stops NOS 2006 dated Butler Creek front/rear scope covers Ops Inc 12th model suppressor, 5XXX serial block that matches deployment case Deployment Kit: 2006 dated USMC-issued Pelican 1700 case serialized to an H&R M16A1 lower Issued Otis M4/M16 5.56 cleaning kit (black, NSN marked) NOS KAC broom handle grip Original USMC issued Mk12 Mod 1 operator's manual NOS early Mildot Master (registered trademark, patent 5960576 & 6196455, "WWW.MILDOT.COM/MADE IN U.S.A.) and large instruction manual Reproduction USMC round count log (Modern Arm Resources) Reproduction Materiel tag (Modern Arm Resources) 2004 DeltaMax rev. 2 Ballisticard (Modern Arm Resources) Reproduction 22CF-30 Dewey rod (Modern Arm Resources) Reproduction bore guide (Modern Arm Resources) NOS Eagle TAS-1 sling w/ UMSS adapter NOS Uncle Mike's sling swivel https://i.imgur.com/AN8hG2zh.jpeg https://i.imgur.com/kF51rKBh.jpeg https://i.imgur.com/ZKzKzzxh.jpeg https://i.imgur.com/w0QDZS0h.jpeg https://i.imgur.com/yxWmPVnh.jpeg https://i.imgur.com/n5oZBgvh.jpeg Thanks to Chris at Intl Mil Co, wakebrdr142, Engineer5, PerfectTurn, ringer706, and all the other folks here who helped me put this together over the last few years. Still shoots pretty good with the takeoff barrel. https://i.imgur.com/JTTsYn2h.jpeg |
Collector, historian, and enthusiast of A.R.M.S. rails, mounts, and accessories.
|
Inspired by Svensson to post a few pics of her, some old pieces some new. Ops Inc can, full address fsgb, rev 3 barrel, circa 03 handguard, wingless 38, wingless 40, original nls arms 22, 04 3-9 illuminated mildot, Diemaco upper, Youngs manufacturing national match carrier, welded gasbuster, Attached File Intl Mil hydration lower, geissele ssa-e, older unmarked colt cs stock, built the same as newer stocks but shorter, a few things that probably should be changed if I ever found them. |
Member
Joined:
Feb 2023
Posts:
518
EE: 100% (3)
PA, USA
|
Originally Posted By tamboi: https://www.ar15.com/media/mediaFiles/28561/1000013880_jpg-3671727.JPG. Some day she may be close |
Collector, historian, and enthusiast of A.R.M.S. rails, mounts, and accessories.
|
Originally Posted By Blanco_Diablo: How about some Mod 0s with CAR stocks. Need some inspiration   
|
-Things do not happen. Things are made to happen. -JFK
-Beware the fury of a patient man.
-Thousands and thousands of laws....All for just ten commandments.
-"alot" is not a word.
-Beware the fury of a patient man.
-Thousands and thousands of laws....All for just ten commandments.
-"alot" is not a word.
|
Originally Posted By ATHRASH: Question homies thinking of picking up a LT104 mount as a stand in until I can find some medium ARMS rings for a mod 0 build anyone rocking that mount on a mod 0 and if so how you guys liking it ? Or is it wack I did exactly that and I liked the setup. I have ARMS mounts now, which are cooler, but the Larue setup was better, IMO. |
Why is the sky blue?
What makes the green grass grow?
What makes the green grass grow?
|
Got this in my email this morning. Some drop is coming for MK12s on the 19th at Wet Worx. Attached File I'll cross post this in the other Mk12 thread. |
Why is the sky blue?
What makes the green grass grow?
What makes the green grass grow?
|
Progress on my clone-enough build. Someone sell me an SPR 38 rail please and/or a TAS-1 kit. TIA. Attached File |
Joined:
Mar 2022
Posts:
11
EE: 100% (1)
WI, USA
Joined:
Dec 2025
Posts:
4
EE: 0% (0)
USA
|
Recently picked up a PSA Mk 12 MOD 0 upper from PSA. This has the ARMS Sawn Sleeve on top that goes to the front of the hand guard. My question is: Before I end up mounting any glass, do I need to loctite the sleeve (monolithic rail) or do I need to be concerned with it coming loose in the future? Silly question, I know. My neuroticism is getting the best of me. https://palmettostatearmory.com/psa-sabre-mk12-mod-0-spr-upper.html I already tried asking my wife's boyfriend but he wouldn't help me because it's date night for them. Thanks. |
|
Originally Posted By MicrowavedIceCream: Recently picked up a PSA Mk 12 MOD 0 upper from PSA. This has the ARMS Sawn Sleeve on top that goes to the front of the hand guard. My question is: Before I end up mounting any glass, do I need to loctite the sleeve (monolithic rail) or do I need to be concerned with it coming loose in the future? Silly question, I know. My neuroticism is getting the best of me. https://palmettostatearmory.com/psa-sabre-mk12-mod-0-spr-upper.html I already tried asking my wife's boyfriend but he wouldn't help me because it's date night for them. Thanks. I don’t see how it could hurt. |
|
Originally Posted By MicrowavedIceCream: Recently picked up a PSA Mk 12 MOD 0 upper from PSA. This has the ARMS Sawn Sleeve on top that goes to the front of the hand guard. My question is: Before I end up mounting any glass, do I need to loctite the sleeve (monolithic rail) or do I need to be concerned with it coming loose in the future? Silly question, I know. My neuroticism is getting the best of me. https://palmettostatearmory.com/psa-sabre-mk12-mod-0-spr-upper.html I already tried asking my wife's boyfriend but he wouldn't help me because it's date night for them. Thanks. Mine fit kinda funky, so I used blue Loctite to secure it. |
Why is the sky blue?
What makes the green grass grow?
What makes the green grass grow?
Member
Joined:
Feb 2023
Posts:
521
EE: 100% (3)
PA, USA
|
Originally Posted By MicrowavedIceCream: Recently picked up a PSA Mk 12 MOD 0 upper from PSA. This has the ARMS Sawn Sleeve on top that goes to the front of the hand guard. My question is: Before I end up mounting any glass, do I need to loctite the sleeve (monolithic rail) or do I need to be concerned with it coming loose in the future? Silly question, I know. My neuroticism is getting the best of me. https://palmettostatearmory.com/psa-sabre-mk12-mod-0-spr-upper.html I already tried asking my wife's boyfriend but he wouldn't help me because it's date night for them. Thanks. |
Collector, historian, and enthusiast of A.R.M.S. rails, mounts, and accessories.
|
Originally Posted By stoner63a: Remanufactured TAS-1 good enuff? Probably better than the blue force gear I have on it. I'd be interested. Also, here she is finished for everyone's viewing pleasure. Think this will be about as accurate as I get for the time being. Host: Colt AR-15A4, NOS, Roll marked, keyhole upper and lower Barrel: HCS Douglas Barrel, flats machined by Adco Anodizing: Hunter Rifleworks 70s Colt Grey Handguard: Precision Reflex Gen II Rail: PRI peq rail for now FSB: PRi early gas block with set-screw, flat bottom Stock: new production H&R A1 Grip: Colt A1 Trigger: Geissele SSA Charging handle: PRi Gas Buster M-84 new production Muzzle device: OPS Inc 12th Model, with long collar Rear iron sight: A.R.M.S. #40 new production Scope rings: A.R.M.S. #22 Medium rings with lever stops, #22 Tactical Ring Cap and #22 Tactical Ring Rail Optic: Leupold LR/T 3.5-10x40 LR, M3 turrets, Illuminated TMR (couldn't find mildot version) Bipod: Harris with A.R.M.S. #32 Attached File Attached File Attached File |
|
Originally Posted By 11boomboom: Got this in my email this morning. Some drop is coming for MK12s on the 19th at Wet Worx. https://www.ar15.com/media/mediaFiles/523928/Untitled_jpg-3674115.JPG I'll cross post this in the other Mk12 thread. It's the gen 3 SOCOM stocks. |
Anyone else reproducing these stickers? There is a vendor (more than likely a member here) on eBay but they have ceased doing them now. After all these years of having my build and an original deployment case, I wasn't paying attention and dropped the ball on getting a set. Any help would be appreciated. Thanks all. 
|
|
Probably missed this scrolling through, but what QD mount is that? |
|
Originally Posted By stoner63a: Message me after Christmas for the remfg TAS-1 Kits Thanks for repro sling. I'm extremely impressed with the quality. Now I just need to track down the KAC sling stud mount to actually use it. Attached File |
|
Originally Posted By ChemTrailZ: Anyone still making TAS-1 sling clones? Mostly interested in the buttstock adapter, but would purchase a full sling kit if available. Thanks Look up 4 posts. |
God will not look you over for medals, diplomas, or degrees – but for scars
|
Originally Posted By 5RWill: Been putting my mk12 mod h to work lately. Will have the 22 arc mod 0 in a couple of weeks. PRI sent me the wrong diy build kit. Ordered Gen II and received Gen III https://www.snipershide.com/shooting/attachments/img_4937-jpeg.8847895/ https://www.snipershide.com/shooting/attachments/img_4932-jpeg.8847893/ https://www.snipershide.com/shooting/attachments/img_4929-jpeg.8847894/https://www.snipershide.com/shooting/attachments/img_4928-jpeg.8847892/ How do you like that Steiner 2-12? |
|
Originally Posted By Three0h8: How do you like that Steiner 2-12? It’s perfect for the mk12. Honestly one of my favorite scopes ive had in recent years. If they had just had some kind of circle to draw your eye in on 2x rather than having to rely on illum so much it would be perfect. Otherwise it nails pretty much everything I’d want for an optic for the mk12 or spr. Its lightweight has great glass, good eye relief, good turrets, forgiving parallax for its design, and a very useable reticle at 12x. I lost my scope caps that night so I’m in need of new ones. Wish OHC would make some |
|
Originally Posted By 5RWill: Mk12 Mod 0 in 22 arc is finally done https://www.snipershide.com/shooting/attachments/img_4992-jpeg.8852770/ https://www.snipershide.com/shooting/attachments/img_4993-jpeg.8852771/ any reliability issues, hey, i see the HIDE attachments :D Catch you out there with Qs 
|
|
Originally Posted By xxflyingturtlexx: any reliability issues, hey, i see the HIDE attachments :D Catch you out there with Qs Oh yeah lol. 88s are breaking tips which is more of a bullet issue. I single fed them and shot a decent group yesterday it was locking back with 4 O'clock ejection. 62s are short stroking with the A2 buffer. JP low mass buffer and polished spring are on the way. Real issue is the ELD M shoot, that's what i want to shoot, and I'm afraid to run them cause of the tip issue which is a bummer. |
| Does anyone have an extra ARMS 38 SPR MOD rail they would be willing to lend me to digitize? A big ask I know, but doesn't hurt to ask. They are going for $2k if you can find one and PRI doesn't make their 38 repros in the correct finish. So, F it, I'll just do it myself. DM me you might be open to such an endeavor. Thanks. |
|
Originally Posted By 5RWill: Oh yeah lol. 88s are breaking tips which is more of a bullet issue. I single fed them and shot a decent group yesterday it was locking back with 4 O'clock ejection. 62s are short stroking with the A2 buffer. JP low mass buffer and polished spring are on the way. Real issue is the ELD M shoot, that's what i want to shoot, and I'm afraid to run them cause of the tip issue which is a bummer. Originally Posted By 5RWill: Originally Posted By xxflyingturtlexx: any reliability issues, hey, i see the HIDE attachments :D Catch you out there with Qs Oh yeah lol. 88s are breaking tips which is more of a bullet issue. I single fed them and shot a decent group yesterday it was locking back with 4 O'clock ejection. 62s are short stroking with the A2 buffer. JP low mass buffer and polished spring are on the way. Real issue is the ELD M shoot, that's what i want to shoot, and I'm afraid to run them cause of the tip issue which is a bummer. Is that a bullet issue, or a mag height issue? I’ve used 123gr ELD-Ms in my Larue 6.5G upper and rando lower with decade old CPD 7.62x39 mags without any problems. Is the mag a hair too low in the magwell, leading to the bullet tip impacting the top of the chamber and breaking off the tip? |
|
Originally Posted By towerofpower94: Is that a bullet issue, or a mag height issue? I’ve used 123gr ELD-Ms in my Larue 6.5G upper and rando lower with decade old CPD 7.62x39 mags without any problems. Is the mag a hair too low in the magwell, leading to the bullet tip impacting the top of the chamber and breaking off the tip? From what I've seen it's a bullet problem. 62s have no issues. It's just 88s. |
mil-surp gun parts warehouse extraordinaire
Joined:
Jun 2016
Posts:
1414
EE: 100% (17)
OH, USA
|
Originally Posted By tarheel7734: I'm using a nx8 2.5-18 on both my mod 0 and mod 1. is the nx8 2.5-18 a rare scope to find or typo? pics arent popping up of an nx8 2.5-18 they just keep showing nx8 2.5-10 and 2.5-20. |
independent fundamental baptist. NOT A COMMIE!
Official Mk12 Mod0, Mod1, ModH Photo and Discussion Thread (Page 1219 of 1226)
AR Sponsor