AR Sponsor
Official FBI/ HRT/ Reg. SWAT Clone Picture and Discussion Thread (Page 88 of 90)
The voices in my head say I’m just being paranoid
Joined:
Oct 2013
Posts:
39525
EE: 100% (120)
KY, USA
|
Originally Posted By NachoDip: Black Green is a lightweight barrel and tan is heavy, I don’t remember what black is supposed to be. TBH, very few people have even bothered to use the correct barrel so as long as it’s 11.5” I wouldn’t worry about it. |
If you aren't representing Jesus in a way that makes people want to hang out with you, you're doing it wrong.
|
Originally Posted By NachoDip: So. By the grace of G$ and the guys at GACS. I managed to get something interesting in the last 4th of July sale I got an original 10” federal rail. With the shorter bottom section. Measures out at 10”. So do I need to build a FBI clone gun now? I have a spare aimpoint T1 laying around. Not sure if I have the right barrel. I do have a SBR registered lower, and would consider doing another one for the heck of it. So how OG is your rail? Is this section flat or is it super OG like mine with the rounded ends. I believe the rounded ends are pre production and very first batch. 
|
|
Originally Posted By Bhavin22: So how OG is your rail? Is this section flat or is it super OG like mine with the rounded ends. I believe the rounded ends are pre production and very first batch. https://i.imgur.com/89GbOVh.jpg Rounded and then tapers down for the word super like yours. Looks the same. Just different color |
Esstac’s Retarded Social Media Influencer
|
Can anyone provide some clarity on gas block dimples? I thought I remember reading somewhere in this thread about the Geissele super gas block being installed with dimples but no cross pin. Is that correct? Who's dimpling the barrels? Do they come from Colt like that or is the FBI armorer doing it? Also are both the silver and black gas blocks kosher? |
|
Thinking about going down this rabbit hole, and need some advice. I just picked up a colt 11.5 barrel, cage code upper, from Brownells. Plus a ODG Fed rail from different vendor. I have a form 1 colt m4 marked lower RTG. After thinking about this I have a LE 6920 with the restricted LE / military only marked lower that has never been out of the safe since 2005. Should I take it out and swap out the barrel and furniture or go with the above listed options? Of course I will need to get the tax stamp. Plus this will take an OG 6920 and change it forever. Probably will never get the $1500 I paid for it after the sunset of the AWB so money is not a factor. Thanks |
|
I have a Spuhr HRT SM-2007B Mount which is 1.653 for lower 1/3 co-witness but it doesn’t seem to work with the Troy Battle BUIS thatwere issued with the recievers Are there different height HRT 2007-B mounts?? Everything I find says they are 1.653 so I don't know if the orignal uppers sights co-witnessed with the T1 |
|
Originally Posted By BobaDebt: I have a Spuhr HRT SM-2007B Mount which is 1.653 for lower 1/3 co-witness but it doesn’t seem to work with the Troy Battle BUIS thatwere issued with the recievers Are there different height HRT 2007-B mounts?? Everything I find says they are 1.653 so I don't know if the orignal uppers sights co-witnessed with the T1 This is what mine says. Attached File |
Free men do not ask for permission.
|
Originally Posted By BobaDebt: Does your BUIS co-witness with the red dot that ison this mount? Originally Posted By BobaDebt: Originally Posted By -MainDisconnect-: This is what mine says. Does your BUIS co-witness with the red dot that ison this mount? I would call it lower 1/3 ? Attached File |
Free men do not ask for permission.
|
Anyone knows if any of theses hrt stocks are the correct one for a gray build? https://maximdefense.com/hrt-stocks-braces/ |
|
Originally Posted By BobaDebt: I have decided to opt for the new RDS for my Field Agent upper I think I'm the first person to post a pic of this set up https://i.imgur.com/W9pEC5l.jpg What length is your barrel? Looks nice! |
Joined:
Sep 2024
Posts:
1
EE: 0% (0)
AZ, USA
The voices in my head say I’m just being paranoid
Joined:
Oct 2013
Posts:
39633
EE: 100% (120)
KY, USA
|
Originally Posted By PT1: Just getting ready to start my build on one of these for an sbr. Picked up a stripped upper, 11.5 heavy barrel, and a bcg. What gas block and gas tube are you guys using? The correct gas block is the silver Geissele, but they’re out of production and not all that great to be honest, I’d just use whatever you like. |
If you aren't representing Jesus in a way that makes people want to hang out with you, you're doing it wrong.
Joined:
Sep 2024
Posts:
2
EE: 0% (0)
AZ, USA
|
Originally Posted By Sputnik556: The correct gas block is the silver Geissele, but they’re out of production and not all that great to be honest, I’d just use whatever you like. I appreciate it sir. Im excited to get this one done. Just need to order the hand guard, gas block, gas tube, and forward assist. And the waiting game for all this stuff to arrive. On a side note I’m an idiot and now I have 3 colt bcg’s. Went to the gun show today and bought one forgetting that I ordered one last night after work and won another on GB! Guess it’s always good to have extras |
 Full Auto FBI SWAT Clone Slapped the Swat Clone upper on a full auto lower. Ran great and was surprisingly easy to control. |
Free men do not ask for permission.
|
Originally Posted By BobaDebt: Thanks It's a 10.3, I know that is wrong but all of my other SBR uppers are 10.3 or .4 so it's what I stick with I have a setup similar to yours, except I used an Expo 10.3 chrome lined barrel and a DDC G Fed rail. I also used Precision Armament shims to get the closed tine Warcomp to mount my Surefire RC-2. I'll try and post some pics of it later. |
 This is my build so far. Colt m4 lower Colt upper Colt 6933 barrel with shaved F marked FSB pined on. Colt 4 position tube with magpul crt Geissele SSA trigger group Stock colt upper and lower parts Magpul back up sights Aimpoint T1 with DD base Need sling, and SF light I got the ODG government CH, and trigger guard on sale but not sure if I like it so I have a black CH and Colt trigger guard RTG. Thoughts? Attached File Attached File Attached File Attached File |
|
Originally Posted By CQB762: https://imgur.com/a/eimXuzc This is my build so far. Colt m4 lower Colt upper Colt 6933 barrel with shaved F marked FSB pined on. Colt 4 position tube with magpul crt Geissele SSA trigger group Stock colt upper and lower parts Magpul back up sights Aimpoint T1 with DD base Need sling, and SF light I got the ODG government CH, and trigger guard on sale but not sure if I like it so I have a black CH and Colt trigger guard RTG. Thoughts? https://www.ar15.com/media/mediaFiles/96823/IMG_0131_jpeg-3325394.JPG https://www.ar15.com/media/mediaFiles/96823/IMG_0132_jpeg-3325395.JPGhttps://www.ar15.com/media/mediaFiles/96823/IMG_0134_jpeg-3325397.JPGhttps://www.ar15.com/media/mediaFiles/96823/IMG_0136_jpeg-3325400.JPG Not bad. I did the bombproof install with the G gas block. I haven’t seen any pictures of the ODG changing handle in use. I had one, sold it and currently using the black Gov handle. |
Free men do not ask for permission.
|
My goal was to use the G gas block on a stripped 6933 barrel but it seems to be out of spec. The gas block fits perfectly on 3 different barrels, 2 Colt’s that I removed the FSB on ,and a stripped FN. But I can’t get it to fit the striped Colt 6933 barrel. So that one is going back to the vendor. |
Joined:
Sep 2023
Posts:
201
EE: 100% (44)
TN, USA
|
I have the MK4 FED ODG Gen1 rail. Looking at barrel options: Is this the barrel for "clone" correct? https://www.brownells.com/gun-parts/rifle-parts/rifle-barrels-parts/ar-15-le6933-5.56-barrel-11.5in/?msockid=01702d2b3a4e6a7f187738153bdc6b3e Any feedback on this barrel for gassing, accuracy, reliability? I am also thinking DD 11.5, have ADCO pin my Giessele gas block. Thanks in advance. |
The voices in my head say I’m just being paranoid
Joined:
Oct 2013
Posts:
40064
EE: 100% (120)
KY, USA
|
Originally Posted By dms888: I have the MK4 FED ODG Gen1 rail. Looking at barrel options: Is this the barrel for "clone" correct? https://www.brownells.com/gun-parts/rifle-parts/rifle-barrels-parts/ar-15-le6933-5.56-barrel-11.5in/?msockid=01702d2b3a4e6a7f187738153bdc6b3e Any feedback on this barrel for gassing, accuracy, reliability? I am also thinking DD 11.5, have ADCO pin my Giessele gas block. Thanks in advance. That is the correct barrel for a SWAT (OD) gun. |
If you aren't representing Jesus in a way that makes people want to hang out with you, you're doing it wrong.
Joined:
Nov 2024
Posts:
1
EE: 0% (0)
USA
Joined:
Nov 2024
Posts:
2
EE: 0% (0)
USA
|
Originally Posted By daylapaul: Can anyone provide some clarity on gas block dimples? I thought I remember reading somewhere in this thread about the Geissele super gas block being installed with dimples but no cross pin. Is that correct? Who's dimpling the barrels? Do they come from Colt like that or is the FBI armorer doing it? Also are both the silver and black gas blocks kosher? Did anyone ever figure this out? |
|
Originally Posted By WhitlockedandLoaded: Did anyone ever figure this out? FBI guns haven’t used the g gas blocks in a long time. I think it may have been a one time/developmental thing. Most recent first hand info from swat members seem to indicate they are all using colt shaved FSBs now. You might have to read through this thread but the info is there |
The voices in my head say I’m just being paranoid
Joined:
Oct 2013
Posts:
40144
EE: 100% (120)
KY, USA
|
Has the OD Federal rail been discontinued? I was thinking about parting my upper out and went to check to see what they sell for and it’s no longer listed. |
If you aren't representing Jesus in a way that makes people want to hang out with you, you're doing it wrong.
|
Originally Posted By Sputnik556: Has the OD Federal rail been discontinued? I was thinking about parting my upper out and went to check to see what they sell for and it's no longer listed. |
The voices in my head say I’m just being paranoid
Joined:
Oct 2013
Posts:
40147
EE: 100% (120)
KY, USA
|
Originally Posted By Muzap: I just looked on their website and it doesn't look like they have green as an option for any rails. Originally Posted By Muzap: Originally Posted By Sputnik556: Has the OD Federal rail been discontinued? I was thinking about parting my upper out and went to check to see what they sell for and it's no longer listed. I’ve seen stuff go OOS for over a year and never be removed from the site, I don’t like the look of that. |
If you aren't representing Jesus in a way that makes people want to hang out with you, you're doing it wrong.
|
Bill said that ODG & Grey rails are going to be taken off the regular site, there focus is on the black & DDC stuff He said those two colors will come back for their sales though (I believe the sale before their BF sale had ODG) |
"Do you want to know who you are? Don't ask. Act! Action will delineate and define you." - Thomas Jefferson
VCDL Member
Volunteer Firefighter/EMT and damn PROUD to be! : Arfcom Callsign "Bucket 2"
VCDL Member
Volunteer Firefighter/EMT and damn PROUD to be! : Arfcom Callsign "Bucket 2"
The voices in my head say I’m just being paranoid
Joined:
Oct 2013
Posts:
40156
EE: 100% (120)
KY, USA
The voices in my head say I’m just being paranoid
Joined:
Oct 2013
Posts:
40157
EE: 100% (120)
KY, USA
|
Originally Posted By NachoDip: I saw that. Tempting for sure. Originally Posted By NachoDip: Originally Posted By Sputnik556: Posted my OD upper in the EE if anyone is looking, accepting offers. I saw that. Tempting for sure. You couldn’t build it for what it’s priced at, but it is admittedly priced on the high end of its value for used parts. I’ll probably add a few accessories to the listing without increasing the price much if at all. I don’t have to sell it, but I’ve pretty much lost interest in it. |
If you aren't representing Jesus in a way that makes people want to hang out with you, you're doing it wrong.
Official FBI/ HRT/ Reg. SWAT Clone Picture and Discussion Thread (Page 88 of 90)
AR Sponsor