User Panel
[Last Edit: Vehemence]
[#1]
Originally Posted By DCRV: Is an "M4 CARBINE" roll-marked lower part of the clone correct universe for an M4A1 build? LGS only has an LE6920 in stock, at a very attractive price. And, does anyone know what the correct Part # would be for a UID for that exact lower? View Quote @DCRV If you’re interested (since you just bought one), there’s some recent info I learned regarding cloning with lowers marked specifically ‘M4 CARBINE’ here: Cloning w/M4 CARBINE marked lowers Of course as wally05 mentioned on the last page, it’s a Colt… sooo… doubt you’ll take much heat for using it for a block II build (I would) |
|
|
[Last Edit: Vehemence]
[#2]
Also, regarding the post I quoted above, I believe the correct part number for an M4 CARBINE would be: PART# 9390000
Attached File |
|
|
[Last Edit: Vehemence]
[#3]
The M4A1 CARBINE part number (correct for SOPMOD Block II) is: PART# 12972700
Attached File (both rifles above have Colt uppers on PSA GOVT marked lowers, hence the matching cage #s) Below is an M4A1 CARBINE square UID (on one of my old RRA non-clone-correct lowers, hence the weird cage #): Attached File I should mention the two part numbers I listed in this post and the one above are for Colt. I may be wrong, but I believe the part numbers may vary from other manufacturers like FN, etc. |
|
|
[#4]
|
|
|
[#5]
This is mine. Thanks for confirming I have the correct part#. It will be getting a rattlecan job tomorrow.
Attached File |
|
That which does not kill us makes us stronger. - Friedrich Nietzsche
I've stayed relatively employed most of my adult life. That should count as miracle #1 - Wandering_Moses |
[#6]
Originally Posted By Cowbell: This is mine. Thanks for confirming I have the correct part#. It will be getting a rattlecan job tomorrow. https://www.ar15.com/media/mediaFiles/259822/61161837-8A5E-4B0A-9890-D5F1328D79B4_jpe-2366684.JPG View Quote @Cowbell How did the paint job come out? Pics? |
|
|
[#7]
Originally Posted By Vehemence: @Cowbell How did the paint job come out? Pics? View Quote View All Quotes View All Quotes Originally Posted By Vehemence: Originally Posted By Cowbell: This is mine. Thanks for confirming I have the correct part#. It will be getting a rattlecan job tomorrow. https://www.ar15.com/media/mediaFiles/259822/61161837-8A5E-4B0A-9890-D5F1328D79B4_jpe-2366684.JPG @Cowbell How did the paint job come out? Pics? Ok I guess. It’s my first time Honest opinions? Just got don’t with it a couple hours ago. Attached File |
|
That which does not kill us makes us stronger. - Friedrich Nietzsche
I've stayed relatively employed most of my adult life. That should count as miracle #1 - Wandering_Moses |
[#8]
Originally Posted By StealthGuy: Anyone know what vfg this is? Looks like a zenitco rk-6. Not to sure though. https://i.imgur.com/tMxZ8Oh.jpg View Quote |
|
IG @bayou_bengal-rifles
|
[#9]
|
|
That which does not kill us makes us stronger. - Friedrich Nietzsche
I've stayed relatively employed most of my adult life. That should count as miracle #1 - Wandering_Moses |
[#10]
Originally Posted By LsuJon: Yes. Zenitco View Quote I wasn’t too sure. The 1000+ hour tarkov player in me was telling me rk-6. That’s definitely an interesting grip on a us mil gun. That’s probably going to be a bitch to get now. |
|
|
[Last Edit: brodband8]
[#11]
Originally Posted By Cowbell: Ok I guess. It’s my first time Honest opinions? Just got don’t with it a couple hours ago. https://www.ar15.com/media/mediaFiles/259822/E2068718-C8CC-4FB2-A1DC-DE1212D7C369_jpe-2367631.JPG View Quote Paint the front and the optic the same way. |
|
|
[#12]
Originally Posted By brodband8: Paint the front and the optic the same way. View Quote View All Quotes View All Quotes Originally Posted By brodband8: Originally Posted By Cowbell: Ok I guess. It’s my first time Honest opinions? Just got don’t with it a couple hours ago. https://www.ar15.com/media/mediaFiles/259822/E2068718-C8CC-4FB2-A1DC-DE1212D7C369_jpe-2367631.JPG Paint the front and the optic the same way. I do need to hit the aimpoint but wouldn’t painting FDE over an anodized aluminum handguard in FDE be silly? |
|
That which does not kill us makes us stronger. - Friedrich Nietzsche
I've stayed relatively employed most of my adult life. That should count as miracle #1 - Wandering_Moses |
[#13]
Originally Posted By Cowbell: I do need to hit the aimpoint but wouldn’t painting FDE over an anodized aluminum handguard in FDE be silly? View Quote View All Quotes View All Quotes Originally Posted By Cowbell: Originally Posted By brodband8: Originally Posted By Cowbell: Ok I guess. It’s my first time Honest opinions? Just got don’t with it a couple hours ago. https://www.ar15.com/media/mediaFiles/259822/E2068718-C8CC-4FB2-A1DC-DE1212D7C369_jpe-2367631.JPG Paint the front and the optic the same way. I do need to hit the aimpoint but wouldn’t painting FDE over an anodized aluminum handguard in FDE be silly? This is a clone thread. It passed silly a long time ago. |
|
God will not look you over for medals, diplomas, or degrees – but for scars
|
[#14]
Originally Posted By SecretSquirell: This is a clone thread. It passed silly a long time ago. View Quote View All Quotes View All Quotes Originally Posted By SecretSquirell: Originally Posted By Cowbell: Originally Posted By brodband8: Originally Posted By Cowbell: Ok I guess. It’s my first time Honest opinions? Just got don’t with it a couple hours ago. https://www.ar15.com/media/mediaFiles/259822/E2068718-C8CC-4FB2-A1DC-DE1212D7C369_jpe-2367631.JPG Paint the front and the optic the same way. I do need to hit the aimpoint but wouldn’t painting FDE over an anodized aluminum handguard in FDE be silly? This is a clone thread. It passed silly a long time ago. I had to work myself up to doing what I did today. Let me get a few beers deep one Saturday and I’ll do the front |
|
That which does not kill us makes us stronger. - Friedrich Nietzsche
I've stayed relatively employed most of my adult life. That should count as miracle #1 - Wandering_Moses |
[#15]
Originally Posted By Cowbell: I do need to hit the aimpoint but wouldn’t painting FDE over an anodized aluminum handguard in FDE be silly? View Quote Definitely recommend it. Just painted the rail to match the rest of the gun on my MK18, and it looks infinitely better. Can check it out in the cqbr thread. |
|
|
[#16]
Originally Posted By Vehemence: @DCRV If you’re interested (since you just bought one), there’s some recent info I learned regarding cloning with lowers marked specifically ‘M4 CARBINE’ here: Cloning w/M4 CARBINE marked lowers Of course as wally05 mentioned on the last page, it’s a Colt… sooo… doubt you’ll take much heat for using it for a block II build (I would) View Quote Thanks a ton, for this and the Part Number post. |
|
|
[#17]
Originally Posted By DCRV: Thanks a ton, for this and the Part Number post. View Quote View All Quotes View All Quotes Originally Posted By DCRV: Originally Posted By Vehemence: @DCRV If you’re interested (since you just bought one), there’s some recent info I learned regarding cloning with lowers marked specifically ‘M4 CARBINE’ here: Cloning w/M4 CARBINE marked lowers Of course as wally05 mentioned on the last page, it’s a Colt… sooo… doubt you’ll take much heat for using it for a block II build (I would) Thanks a ton, for this and the Part Number post. |
|
|
[Last Edit: Tactical_Bucket]
[#18]
|
|
C14A05
|
[#19]
I have a KAC ‘USMC’ marked 200-600m rear sight that I’m thinking of putting on one of my block II FSB builds. Kosher or no-go?
|
|
|
[#20]
Originally Posted By Tactical_Bucket: Did crane work on the block IIs? Would it be clone correct to build one from a crane colt receiver? Or were those just used on MK18s? https://imgur.com/lPfyI1z.jpg View Quote Crane being Navy, did them for SEALs. Never seen a Mk18 Mod 0 (Crane with anchor) receiver reused as a Mk 18 Mod 1 (which is a Block II) At this point they just used Colt M4A1 Carbine receivers with that lined out and added "NAVY 18-1" If posted that numberous times here and Mk18 thread. CD |
|
De Oppresso Liber
Iraq: 91,03,04,05,06,08,09,15&16' Afghanistan: 09,10,11',14',17',18',19',20'&21' |
[#21]
Originally Posted By Vehemence: I have a KAC ‘USMC’ marked 200-600m rear sight that I’m thinking of putting on one of my block II FSB builds. Kosher or no-go? View Quote MARSOC to my knowledge didn't purchase the DD M4A1 RIS II with FSB. Only SF used that. So it would be wrong from a pure clone route. But its your gun. CD |
|
De Oppresso Liber
Iraq: 91,03,04,05,06,08,09,15&16' Afghanistan: 09,10,11',14',17',18',19',20'&21' |
[#22]
Originally Posted By Combat_Diver: MARSOC to my knowledge didn't purchase the DD M4A1 RIS II with FSB. Only SF used that. So it would be wrong from a pure clone route. But its your gun. CD View Quote Thanks CD. I’ll just keep the Matech I have on the block II FSB and use the USMC KAC on an MWS build or on my M16A4. |
|
|
[#23]
|
|
|
[#24]
|
|
|
[#25]
Originally Posted By oldbrowndog: Not CD, but.... MARSOC has the standard M4A1 SOPMOD Block II setup, non-FSP. All the BUIS are USMC-marked KAC micro 600m rear and black or taupe 99051 fronts. View Quote View All Quotes View All Quotes Originally Posted By oldbrowndog: Originally Posted By Vehemence: @Combat_Diver Did MARSOC purchase Non-FSBs? Would it be correct on one? Not CD, but.... MARSOC has the standard M4A1 SOPMOD Block II setup, non-FSP. All the BUIS are USMC-marked KAC micro 600m rear and black or taupe 99051 fronts. Correct. MARSOC used DD M4A1 RIS II non FSB rails CD |
|
De Oppresso Liber
Iraq: 91,03,04,05,06,08,09,15&16' Afghanistan: 09,10,11',14',17',18',19',20'&21' |
[Last Edit: Vehemence]
[#26]
Thanks CD & oldbrowndog. Exactly the info I was looking for.
|
|
|
[Last Edit: Vehemence]
[#27]
|
|
|
[Last Edit: leerx]
[#28]
|
|
|
[#29]
Originally Posted By LsuJon: Yes. Very common. my old setup clone: https://www.ar15.com/media/mediaFiles/316069/83805B06-88F9-4879-A732-4931F5AC0B61_jpe-2302655.JPG USASOC: https://www.ar15.com/media/mediaFiles/316069/897BA298-C55D-4B97-BC86-2BE3C5B10391_jpe-2302661.JPG NSW: https://www.ar15.com/media/mediaFiles/316069/AAD6B213-2B24-4293-9BF9-A39FC9CAA6DA_jpe-2302658.JPG View Quote @LsuJon any idea what reticle those are? |
|
|
[#30]
Originally Posted By leerx: Hey gang, its been a while How rare are the Eotech SU-231a NAVSEA's now? https://i.imgur.com/rlgv9bS.jpeg View Quote Not $1800 rare. |
|
Not a Tennessee Squire
|
[#31]
|
|
IG @bayou_bengal-rifles
|
[#32]
Would a 2013 model Colt Le6920-Oem2 Carbine be a good staring place for a block ii?
|
|
|
[#33]
|
|
|
[#34]
|
|
|
[#35]
Originally Posted By FDEinAZ: https://i.postimg.cc/DzDGBTbG/BlkIIFSB.png Inspired by this pic I found buried in this thread somewhere I believe. My ATPIAL is on my 11.5 URGI but I don't use the tape switch so I guess I could hang it off the rail to get more correct. https://i.postimg.cc/0jZDGJGk/f12cc2a6-852a-47ba-a7d6-63d991e13553.jpg View Quote Anymore SF CTN in the wild photos out there? I got one practically new sitting on the bench and I much prefer it over the 4P. |
|
|
[#36]
Need some inspiration to finish out my M4A1 FSP build. Anyone got some pics of their M4A1 FSP wearing a SU230? Thanks in advance!
|
|
|
[#37]
|
|
|
[#38]
|
|
“The only thing necessary for the triump of evil is for good men to do nothing.” - Edmund Burke
|
[#39]
Originally Posted By Dobs013: Trigger swap this weekend and still need a couple more things, but it’s coming along… https://i.imgur.com/UCMGi5u.jpg View Quote Good choice. I run the Larue in mine and it’s one of the best in my opinion. |
|
|
[#40]
Originally Posted By Washpipe: New optic on the block 2. Not exactly clone correct, but I don’t care. https://www.ar15.com/media/mediaFiles/557527/863E0FCB-952F-4D39-9862-522E343BA425_jpe-2405546.JPG View Quote Very nice |
|
|
[#41]
Finally got my light tail cap, CQD front sling mount and and some arson machine wire guides so this one is done for now. Maybe some more spray paint in its future though.
Attached File |
|
That which does not kill us makes us stronger. - Friedrich Nietzsche
I've stayed relatively employed most of my adult life. That should count as miracle #1 - Wandering_Moses |
[#42]
Originally Posted By Cowbell: Finally got my light tail cap, CQD front sling mount and and some arson machine wire guides so this one is done for now. Maybe some more spray paint in its future though. https://www.ar15.com/media/mediaFiles/259822/494AC4F5-788B-4721-B967-67145686856F_jpe-2406539.JPG View Quote What head is on the light? |
|
God will not look you over for medals, diplomas, or degrees – but for scars
|
[#43]
Originally Posted By SecretSquirell: What head is on the light? View Quote View All Quotes View All Quotes Originally Posted By SecretSquirell: Originally Posted By Cowbell: Finally got my light tail cap, CQD front sling mount and and some arson machine wire guides so this one is done for now. Maybe some more spray paint in its future though. https://www.ar15.com/media/mediaFiles/259822/494AC4F5-788B-4721-B967-67145686856F_jpe-2406539.JPG What head is on the light? KM3 white/IR |
|
That which does not kill us makes us stronger. - Friedrich Nietzsche
I've stayed relatively employed most of my adult life. That should count as miracle #1 - Wandering_Moses |
[#44]
Originally Posted By Cowbell: Originally Posted By SecretSquirell: Originally Posted By Cowbell: Finally got my light tail cap, CQD front sling mount and and some arson machine wire guides so this one is done for now. Maybe some more spray paint in its future though. https://www.ar15.com/media/mediaFiles/259822/494AC4F5-788B-4721-B967-67145686856F_jpe-2406539.JPG What head is on the light? KM3 white/IR I see it now. The locking collar on your can blends in with the head and made it look like something different. |
|
God will not look you over for medals, diplomas, or degrees – but for scars
|
[#45]
Originally Posted By Vehemence: https://www.ar15.com/media/mediaFiles/317025/FAFF8722-1464-44E3-808A-4DE866A0B6E3_jpe-2402537.JPG View Quote Nice. I need to get me a FSP rail. Seem to be unobtanium right now. |
|
|
[#46]
Originally Posted By Washpipe: New optic on the block 2. Not exactly clone correct, but I don’t care. https://www.ar15.com/media/mediaFiles/557527/863E0FCB-952F-4D39-9862-522E343BA425_jpe-2405546.JPG View Quote What is the height of that scope mount? 1.54"? |
|
|
[#47]
|
|
|
[#48]
If anybody knows of a deal on an FSP rail at a good price, hook a brother up.
|
|
|
[#49]
|
|
IG @bayou_bengal-rifles
|
[#50]
Originally Posted By RichieRich562: Finally picked up a Geissele Razor mount. Now just need to find a new lower. The poverty pony makes me feel like a pleb, and my Colts are already being used. https://i.imgur.com/17GwJpP.jpg https://i.imgur.com/qmhfEDD.jpg View Quote A horse is a horse of course |
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.