User Panel
Posted: 8/8/2022 11:37:46 PM EDT
Ok so it’s pretty light. Dsa aluminum bcg I think it’s like 5 oz. Taccom 1 ounce buffer. Faxon match pencil 16” mid length. I really really really want to get a titanium adjustable gas block but they are hell of expensive. I can hardly find any and when I do they are $210 . A non-adjustable battle arms development titanium gas block is only 60 bucks and it is really lightweight. Can I tune it with a different buffer spring or is that Jerry rigging it? Do I have to go to a stiffer spring or a lighter spring?
|
|
I have a LW BCG build with a pencil barrel and Seekins AGB. 3oz Buffer. I think you would probably want a lighter buffer spring but no experience there. My build is standard components aside from the LW carrier and AGB.
|
|
Lighter buffer spring from Taccom will definitely help you maximize the recoil reduction.
You can always get a normal lightweight gasblock and see if BRT has a EZTune gas tube that can work with that setup. |
|
From what I understand, and I hope others can chime in on this, but you want to figure your gas system out before messing with the buffer.
It is far better to have a proper sized gas hole for the barrel length if you are using a non adjustable gas block. If your gas port is over or undersized for that typical barrel length, and you use a non-adj gas block, tuning the buffer system is a bandaid. |
|
Quoted: From what I understand, and I hope others can chime in on this, but you want to figure your gas system out before messing with the buffer. It is far better to have a proper sized gas hole for the barrel length if you are using a non adjustable gas block. If your gas port is over or undersized for that typical barrel length, and you use a non-adj gas block, tuning the buffer system is a bandaid. View Quote Usually that is true. When it comes to Lightweight internals, don't think there is any production barrels really optimized for that. |
|
You can always add a heavier buffer.
Just get an adjustable gas block, you can get the titanium one next paycheck. Winter is coming, the rifle needs to be able to run & soon. In the 27" pencil build, I ran rifle +3" gas & had to run a lightweight steel carrier & pull all the weights out of the buffer. |
|
I gotta ask, ( no offense intended ) Why an Aluminum BCG ?
The service life will be short with an Aluminum BCG, and they can be a real pain to tune, and limit your factory ammo choices. Are you running one for a competition AR ? Are you just trying to make a LtWt AR ? Are you trying to minimize the impulse of the rifle caused by reciprocating mass ? FWIW, there are much better ways to limit recoil impulse's. What ammo will you be using ? Factory 5.56 or a custom tuned, lightly loaded .223 round ?... Full power 5.56 ammo will beat the heck out of your AR with a Alum. BCG. Places like JP and with their Alum. BCG , strongly suggest and use long bearing surfaces on the BCG , not sand cuts. Upper wear WILL be an issue. You will want to run VERY well lubed... ALWAYS. Your hammer will cause wear at the BCG contact area. IMHO, a Aluminum BCG isn't worth the weight savings. I would try to use the longest gas system length you can, and use a Adj. GB, something easily tuned if you are heck bent on using a Alum. BCG. Not trying to be a PITA, but there is a reason Aluminum BCG's aren't used more frequently. Buy a LtWt Steel BCG, and forget the few oz. added to the overall weight. Even then I would still use a Adj. GB. I am saying a lot of this, because lots of newer AR owners, can be seduced by marketing .... and honestly a lot of those marketing gizmo's just ain't worth it. |
|
Quoted: I gotta ask, ( no offense intended ) Why an Aluminum BCG ? The service life will be short with an Aluminum BCG, and they can be a real pain to tune, and limit your factory ammo choices. Are you running one for a competition AR ? Are you just trying to make a LtWt AR ? Are you trying to minimize the impulse of the rifle caused by reciprocating mass ? FWIW, there are much better ways to limit recoil impulse's. View Quote Are there? I've held an aluminum bolt carrier before during the parts shortage, gal was hellbound determined to build her own AR and the full-retail shop in town sold her the last bolt carrier they had on the shelf. It was amazing. It weighed nothing, you could float it around the shop w/ a couple of helium balloons. Yes, it will wear, and yes, you need to keep it well lubed, but w/ the recommended tuned gas it won't beat up your AR even w/ full power loads. I don't think the JP is supposed to run on carbine gas, if I remember right. OP is trying to get a titanium gas block - clearly he's going for an ultralilght rifle. He will be the envy of many in the coming winter who have to carry much heavier guns. |
|
Quoted: I gotta ask, ( no offense intended ) Why an Aluminum BCG ? The service life will be short with an Aluminum BCG, and they can be a real pain to tune, and limit your factory ammo choices. Are you running one for a competition AR ? Are you just trying to make a LtWt AR ? Are you trying to minimize the impulse of the rifle caused by reciprocating mass ? FWIW, there are much better ways to limit recoil impulse's. What ammo will you be using ? Factory 5.56 or a custom tuned, lightly loaded .223 round ?... Full power 5.56 ammo will beat the heck out of your AR with a Alum. BCG. Places like JP and with their Alum. BCG , strongly suggest and use long bearing surfaces on the BCG , not sand cuts. Upper wear WILL be an issue. You will want to run VERY well lubed... ALWAYS. Your hammer will cause wear at the BCG contact area. IMHO, a Aluminum BCG isn't worth the weight savings. I would try to use the longest gas system length you can, and use a Adj. GB, something easily tuned if you are heck bent on using a Alum. BCG. Not trying to be a PITA, but there is a reason Aluminum BCG's aren't used more frequently. Buy a LtWt Steel BCG, and forget the few oz. added to the overall weight. Even then I would still use a Adj. GB. I am saying a lot of this, because lots of newer AR owners, can be seduced by marketing .... and honestly a lot of those marketing gizmo's just ain't worth it. View Quote I found you don't have to douse it in lube like JP suggests, but maybe I was putting too damn much on there. It's true, the bottom of the BCG is going to show wear, but they warranty that thing at 10,000 rounds. I would also say an adjustable gas block is a must for that set-up. |
|
Quoted: I gotta ask, ( no offense intended ) Why an Aluminum BCG ? The service life will be short with an Aluminum BCG, and they can be a real pain to tune, and limit your factory ammo choices. Are you running one for a competition AR ? Are you just trying to make a LtWt AR ? Are you trying to minimize the impulse of the rifle caused by reciprocating mass ? FWIW, there are much better ways to limit recoil impulse's. What ammo will you be using ? Factory 5.56 or a custom tuned, lightly loaded .223 round ?... Full power 5.56 ammo will beat the heck out of your AR with a Alum. BCG. Places like JP and with their Alum. BCG , strongly suggest and use long bearing surfaces on the BCG , not sand cuts. Upper wear WILL be an issue. You will want to run VERY well lubed... ALWAYS. Your hammer will cause wear at the BCG contact area. IMHO, a Aluminum BCG isn't worth the weight savings. I would try to use the longest gas system length you can, and use a Adj. GB, something easily tuned if you are heck bent on using a Alum. BCG. Not trying to be a PITA, but there is a reason Aluminum BCG's aren't used more frequently. Buy a LtWt Steel BCG, and forget the few oz. added to the overall weight. Even then I would still use a Adj. GB. I am saying a lot of this, because lots of newer AR owners, can be seduced by marketing .... and honestly a lot of those marketing gizmo's just ain't worth it. View Quote Cause I can. Lol jk. I have lots of ARs..... I wanted something ridiculous for coyote hunting which involves extremely long hikes and mostly point blank shots or close running shots. So I’m building a lightweight one. Low impulse. Lightens up my load. I will maybe shoot it 500 times my entire life as I hunt with my other rifles too |
|
The difference in weight between a Superlative Arms steel adj gas block and a Superlative Arms titanium adj gas block is 0.29oz
Just get a steel adjustable gas block and be done with it. |
|
Quoted: The difference in weight between a Superlative Arms steel adj gas block and a Superlative Arms titanium adj gas block is 0.29oz Just get a steel adjustable gas block and be done with it. View Quote Ya that’s what I was thinking. God damn it though I already bought a bunch of titanium small parts like a titanium bolt catch, titanium this titanium that. I just really need an adjustable titanium gas block that’s 125 bucks haha |
|
Quoted: Cause I can. Lol jk. I have lots of ARs..... I wanted something ridiculous for coyote hunting which involves extremely long hikes and mostly point blank shots or close running shots. So I’m building a lightweight one. Low impulse. Lightens up my load. I will maybe shoot it 500 times my entire life as I hunt with my other rifles too View Quote Good enough !! And there wasn't any judging by me, so my apologizes if I sounded out of line ... just couldn't tell if the thread was from a newer AR owner. Lol, I was a very impressionable AR owner for my first one, as most of us are... Mine had to be a Colt 20" A2 HBar, just like the USMC taught me. Lol Please let us know your impressions after you get it assembled. |
|
Quoted: Ok so it’s pretty light. Dsa aluminum bcg I think it’s like 5 oz. Taccom 1 ounce buffer. Faxon match pencil 16” mid length. I really really really want to get a titanium adjustable gas block but they are hell of expensive. I can hardly find any and when I do they are $210 . A non-adjustable battle arms development titanium gas block is only 60 bucks and it is really lightweight. Can I tune it with a different buffer spring or is that Jerry rigging it? Do I have to go to a stiffer spring or a lighter spring? View Quote I have the exact set up and an adj block is required. You pay to play for ultra light weight. You can save some money and get an Aero adj block. I don’t remember the weights, but it’s small. Or you can try to tune with the BRT tubes but that will be a pain in the ass. |
|
Quoted: I gotta say, I run a JP aluminum BCG in my AR 308 and it's awesome. It's been flawless and I use it in my hunting rig, very lightweight and noticeably easier to haul around. I found you don't have to douse it in lube like JP suggests, but maybe I was putting too damn much on there. It's true, the bottom of the BCG is going to show wear, but they warranty that thing at 10,000 rounds. I would also say an adjustable gas block is a must for that set-up. View Quote @Demphna2 Could you, give details on your build ? From my lack of experience with Alum. BCG's... I am curious what parts you ended up using ? Buffer setup, barrel length , gas system length, whose Adj. GB ... stuff like that. And... if possible, how much difference in the recoil impulse ? I realize that is subjective... but ... Thanks ahead of time. |
|
Quoted: Not like cash is getting more valuable. View Quote Fully agree. Someday maybe I will find someone that has a Alum. BCG setup , and get to try it. I built a LtWt. steel BCG , adj. GB , 18" RLGS, 5.56, good muzzle brake setup... to be honest I didn't think it made enough difference in the perceived recoil impulse to matter to me and my 220lb build. I wasn't looking for a LtWt carry around rifle, so I focused on just the recoil aspect. Shoots great, but not enough difference to make me want to do another. Maybe I will swap the complete upper to a lighter weight setup, and see if that changes my impressions. |
|
Quoted: Ya that’s what I was thinking. God damn it though I already bought a bunch of titanium small parts like a titanium bolt catch, titanium this titanium that. I just really need an adjustable titanium gas block that’s 125 bucks haha View Quote View All Quotes View All Quotes Quoted: Quoted: The difference in weight between a Superlative Arms steel adj gas block and a Superlative Arms titanium adj gas block is 0.29oz Just get a steel adjustable gas block and be done with it. Ya that’s what I was thinking. God damn it though I already bought a bunch of titanium small parts like a titanium bolt catch, titanium this titanium that. I just really need an adjustable titanium gas block that’s 125 bucks haha I had a buddy do this. He didn’t do a Pareto analysis of weight lost per $. Pin material doesn’t change much weight even if they were aluminum. Most bang (weight loss) for buck is pencil barrel, no muzzle device and light handguards. You could get an aluminum gas block and tune the gas with an adjustable gas key. But you won’t save much weight because the aluminum ones usually have beefier walls and pic rails for front sights. |
|
"I gotta ask, ( no offense intended ) Why an Aluminum BCG ?
The service life will be short with an Aluminum BCG, and they can be a real pain to tune, and limit your factory ammo choices." A: So what? B: Not a "real pain to tune" for me. Install, shoot. No adjustable gas block. C: Again, so what? I'm fine and my gun is fine with 55 and 62 grain. My SE aluminum carrier has some obvious wear on it, but is still working after thousands of FA rounds. That upper doesn't serve any serious purpose for me. |
|
Quoted: "I gotta ask, ( no offense intended ) Why an Aluminum BCG ? The service life will be short with an Aluminum BCG, and they can be a real pain to tune, and limit your factory ammo choices." A: So what? B: Not a "real pain to tune" for me. Install, shoot. No adjustable gas block. C: Again, so what? I'm fine and my gun is fine with 55 and 62 grain. My SE aluminum carrier has some obvious wear on it, but is still working after thousands of FA rounds. That upper doesn't serve any serious purpose for me. View Quote |
|
Quoted: Reading this answer, I could've View Quote View All Quotes View All Quotes Quoted: Quoted: "I gotta ask, ( no offense intended ) Why an Aluminum BCG ? The service life will be short with an Aluminum BCG, and they can be a real pain to tune, and limit your factory ammo choices." A: So what? B: Not a "real pain to tune" for me. Install, shoot. No adjustable gas block. C: Again, so what? I'm fine and my gun is fine with 55 and 62 grain. My SE aluminum carrier has some obvious wear on it, but is still working after thousands of FA rounds. That upper doesn't serve any serious purpose for me. Reading this answer, I could've Attached File I'll try not to create any trigger responses for you in the future, |
|
Quoted: "I gotta ask, ( no offense intended ) Why an Aluminum BCG ? The service life will be short with an Aluminum BCG, and they can be a real pain to tune, and limit your factory ammo choices." A: So what? B: Not a "real pain to tune" for me. Install, shoot. No adjustable gas block. C: Again, so what? I'm fine and my gun is fine with 55 and 62 grain. My SE aluminum carrier has some obvious wear on it, but is still working after thousands of FA rounds. That upper doesn't serve any serious purpose for me. View Quote Am I understanding correctly that you simply installed an aluminum carrier, weighing a fraction of what a standard steel carrier weighs, you did nothing to tune the gun and run it in FA? What's the cyclic rate like on FA? Similar to a micro Uzi? |
|
Quoted: Am I understanding correctly that you simply installed an aluminum carrier, weighing a fraction of what a standard steel carrier weighs, you did nothing to tune the gun and run it in FA? What's the cyclic rate like on FA? Similar to a micro Uzi? View Quote 10" bbl with a rifle lower. It was fast. Mainly just for fun when we were regularly going to MG shoots. I like high ROF (when ammo is cheap.) SD/HD stuff is more sedate. |
|
Quoted: https://www.ar15.com/media/mediaFiles/6163/nasty_jpg-2485254.JPG I'll try not to create any trigger responses for you in the future, View Quote |
|
|
Quoted: I was getting around 1,400 r.p.m. With mine. This is the best of both worlds .a hybrid carrier with a titanium front attached to an aluminum rear Weight 3.9 ounces https://i.imgur.com/hDvXlYi.jpg View Quote |
|
Quoted: I was getting around 1,400 r.p.m. With mine. This is the best of both worlds….a hybrid carrier with a titanium front attached to an aluminum rear Weight 3.9 ounces https://i.imgur.com/hDvXlYi.jpg View Quote That’s the 2A right? |
|
Quoted: I was getting around 1,400 r.p.m. With mine. This is the best of both worlds….a hybrid carrier with a titanium front attached to an aluminum rear Weight 3.9 ounces https://i.imgur.com/hDvXlYi.jpg View Quote Based on that pic, it looks like 2A’s regulated bolt carrier. So essentially an adjustable gas block, just on the other end of the gas tube. |
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.