AR Sponsor
Lets see your AR-10s (Page 7 of 60)
The Super Snipers are only $299 for the rear focus and $399 for the side focus. The Leapers were about $130 for the larger 3-12x44, about $150 for the smaller version, and the T168 was about $60. I am not sure on that last one because it has been with me for some time. |
If it's a Colt, it's a copy of an original ArmaLite.
Run for it??? Runnin's not a plan. No, runnin's what you do when a plan fails.
I am not LARRYG36.
Racing is life. Anything that happens before or after is just waiting.
Run for it??? Runnin's not a plan. No, runnin's what you do when a plan fails.
I am not LARRYG36.
Racing is life. Anything that happens before or after is just waiting.
Thats a steal actually... You highly recommend it I take it? 
|
Breakfast well, for tonight we all dine in hell." - King Leonidas 480 B.C. @ Battle of Thermopoli
Proud member of the 299th Engineering Co, Ft Belvoir VA. 63B
Proud member of the 299th Engineering Co, Ft Belvoir VA. 63B
It ain't gonna be as good as the Super Sniper or a Leupold, etc, but it's worth more than they are asking. It's a very good scope. I would get the smaller one. It has the side focus AND the target turrets. That's my only complaint with the larger one.........it has the side focus and finger adjustments, but no target turrets. If you look at the picture of the larger one, you will see that you have to remove the caps. That said, I will make you a deal on the larger one I have because I want to get another one of the smaller ones. IM me if interested. |
If it's a Colt, it's a copy of an original ArmaLite.
Run for it??? Runnin's not a plan. No, runnin's what you do when a plan fails.
I am not LARRYG36.
Racing is life. Anything that happens before or after is just waiting.
Run for it??? Runnin's not a plan. No, runnin's what you do when a plan fails.
I am not LARRYG36.
Racing is life. Anything that happens before or after is just waiting.
|
If someone can post these pics for me ... Thanks Here is a fresh AR10T that I just got back from GA Precision on 3/1/06. 22" 1:11 twist Mike Rock Barrel Threaded barrel. Bolt/Barrel Extension all matched 2-Stage trigger ARMS #53 MR SIR Harris BRS 6-9 Bipod Leupold 3.5-10X M1 Mildot 30mm & Badger Rings.885 Magpul PSR Stock & Grip. I put 50 rnds threw it today with Winchester Surpreme Match 168gr. @ 100yrds and this is the groups I got. Better range report to come.  http://i2.tinypic.com/qplyd4.jpg http://i2.tinypic.com/qplz4k.jpg http://i2.tinypic.com/qplzsn.jpg http://i2.tinypic.com/qpm1cx.jpg http://i2.tinypic.com/qpm26b.jpg http://i2.tinypic.com/qpm2ox.jpg |
|
Very nice rifle ya got there bottomtime
|
Breakfast well, for tonight we all dine in hell." - King Leonidas 480 B.C. @ Battle of Thermopoli
Proud member of the 299th Engineering Co, Ft Belvoir VA. 63B
Proud member of the 299th Engineering Co, Ft Belvoir VA. 63B
That is a extremely low serial number, if I remember right the first one was 50001. |
Colt probably has staplers or carpet stains in their building that have been there far longer than RRA has been in business. new-arguy, 2005
|
|
Just picked up my AR10A2 today. A couple minor scratches, but the bore and chamber are very nice. It came with two 10 round magazines, the owners manual and about 200 rounds of Indian 308. It also came with a $90 red dot scope and mount. Supposedly it has about 300 rounds down the pipe, and I see no reason not to believe it. The AR10 is the one on top, in case you couldn't tell http://i37.photobucket.com/albums/e87/seahawkdodge/DSCN0082.jpg SN starts with a 2. I guess that means a 2002 manufacture date? http://i37.photobucket.com/albums/e87/seahawkdodge/DSCN0081nsn.jpg |
That is a sweet set up new-arguy. What scope is that? |
...I will support and defend the constitution...
Joined:
Jul 2003
Posts:
2098
EE: 100% (2)
USA
| I agree the LaRue mount is about the finest single piece mount you can get for a scope on an AR, its the third one I own, and my girlfiend has a 4th on her Recce. On our AR15's we'd have nothing else as the LaRue's do the job better than anything else I can think of. Solid, attached to the reciever only, and gets the scope out and away from our eyes like nothing else can. But to be honest, the AR10 has more rail on the upper to mount a scope. So the extention the LaRue offers (its biggest asset) isnt really needed on the .308. I could have just as easily used a good set of rings like Leupold, Badger, ARMS, PRI or even LaRue scope rings etc, and have been just as well. Could have even spaced the rings out a little further. But I got a good deal on the SPR mount, and it works as well as the others I named, so I went with it. |
FDCC - 1*
FL Defensive Carbine Club; www.fdcc.us/
Go chrome or go home!
FL Defensive Carbine Club; www.fdcc.us/
Go chrome or go home!
|
Rifle Specs: GA Precision built 20" Rock Barrel with Vortex FH PRI FF tube Badger Gas Block Vltor AR-10 Buffer Tube Vltor Carbine Mod-Stock Enidine Buffer Ergo Ambi Grip Chip McCormick 2-stage Curved Trigger KNS Trigger Pins Schmidt & Bender, PMII, 3-12x50, L/P, Gen-II Reticle Badger 22MOA Base Badger 34mm High (1.0") Rings US Optics Folding Bubble Level Harris 6-9 BR-S, KMW Pod-Loc ARMS #32 QR Adapter 14 lbs (as pictured)   |
|
http://www.madmunki.com/pics/ar10.jpg ArmaLite AR10A4 Barska SWAT Tactical Scope 8-32 x 44IR Harris Bipod w/Harris adapter #5 (wanting to buy an AR10T barrel, and swap my A4 barrel for a carbine barrel) |
|
I am the proud owner of a new GA Precision AR10 upper in .308. It has a mid weight 16" Mike Rock barrel w/ a Badger muzzle brake and PRI carbon fiber handguard. The brake is beautifully machined and unless you look closely you can see the seem between the barrel and brake. The handguard is full length, covering the Badger gas block and has three short rails at 3', 6', 9' and a long rail on top for forward mounting optics. The 3' and 9' rails can be relocated farther to the rear if desired. It is a half inch shorter than the JP AR15 but a little heavier due to the beefed up AR10 reciever. I still haven't decided what optic I want to put on it. It is capable of .75" easy. I am thinking about a 1-4x or an 4x ACOG and leave the EOTech on my M4gery. http://i21.photobucket.com/albums/b287/gbtx01/GapandJP.jpg http://i21.photobucket.com/albums/b287/gbtx01/PRIandBadgerBrake.jpg http://i21.photobucket.com/albums/b287/gbtx01/18AR10.jpg |
Damn good looking rifle.  ETA: what is it and where can I get one? |
Now that you have a second Eagle Arms tube , I think you should put a low profile gas block on the 10T carbine and put the long tube over it! 
|
The Penguin Credo: Never bathe in hot oil and Bisquick
I just got an Eagle Arms 10T barrel and tube from the ArmaLite Spring sale. Also picked up a blem stripped upper from the same sale, it said the port door does not close properly, whatever that means. Also got a .223 FF barrel nut and the lockring for the tube. I tried it on the tube I got from you and it fits, but the stud inside the tube won't match the holes in the .223 barrel nut. Dang it. I am trying to use it on my M15A4. I am gonna see if there is some way to cut down that stud enough to get the barrel nut on there.
|
If it's a Colt, it's a copy of an original ArmaLite.
Run for it??? Runnin's not a plan. No, runnin's what you do when a plan fails.
I am not LARRYG36.
Racing is life. Anything that happens before or after is just waiting.
Run for it??? Runnin's not a plan. No, runnin's what you do when a plan fails.
I am not LARRYG36.
Racing is life. Anything that happens before or after is just waiting.
...I will support and defend the constitution...
Joined:
Jul 2003
Posts:
2238
EE: 100% (2)
USA
Now that is a damn fine AR-10. In fact, it looks like you've got one hell of a collection. |
http://carbine308.home.att.net
I would not do a thing except possibly free float the barrel. I never understood why a rifle that is basically a long distance shooter needs all the rails, etc. |
If it's a Colt, it's a copy of an original ArmaLite.
Run for it??? Runnin's not a plan. No, runnin's what you do when a plan fails.
I am not LARRYG36.
Racing is life. Anything that happens before or after is just waiting.
Run for it??? Runnin's not a plan. No, runnin's what you do when a plan fails.
I am not LARRYG36.
Racing is life. Anything that happens before or after is just waiting.
I always get at least two of everything. One will stay stock and the other I'll build similar to Duffy's. |
Here is my latest AR10, an Eagle Arms AR10T. Built the upper from closeout items and blem parts bought from ArmaLite and bought complete Eagle Arms lower with ArmaLite 2 stage NM trigger: It functions perfectly and is accurate as hell. I broke in the barrel last Monday.
|
If it's a Colt, it's a copy of an original ArmaLite.
Run for it??? Runnin's not a plan. No, runnin's what you do when a plan fails.
I am not LARRYG36.
Racing is life. Anything that happens before or after is just waiting.
Run for it??? Runnin's not a plan. No, runnin's what you do when a plan fails.
I am not LARRYG36.
Racing is life. Anything that happens before or after is just waiting.
The tube is ArmaLite but the barrel looks like an Eagle unless it is the stainless and someone has finished it in black. |
If it's a Colt, it's a copy of an original ArmaLite.
Run for it??? Runnin's not a plan. No, runnin's what you do when a plan fails.
I am not LARRYG36.
Racing is life. Anything that happens before or after is just waiting.
Run for it??? Runnin's not a plan. No, runnin's what you do when a plan fails.
I am not LARRYG36.
Racing is life. Anything that happens before or after is just waiting.
|
Here is a fresh AR10 that I just get ready. 26" Lothar 1:10 twist 18x1 threaded barrel. 2 Stage trigger. A.R.M.S #35QD base and #35 rings canted in 20 MOA. Harris BRS 6-8 bipod with A.R.M.S #32. Zeiss 3-12x56 Diavari VM/V 30mm Fin-Dot Sniper Scope. Daniel Defence 12.0 handguard. Troy BUIS. BR Suppressor. -TLA-      |
|
Here is my AR-10A4 in REALTREE CAMO. I had been looking for an AR-10 for a wile and when I saw this one in realtree I couldn't resist. Has anyone else seen one in Realtree? It has a Gen III Springfield Armory Scope 4-14x56 GOVT model. It also has an Armalight 2 stage trigger kit. Also I added my Eagle Arms CAR-15. The 16" upper has an EOTECH Holosight, Knights Armament Rail System and a Surefire Tac light. The 20" has a Surefire Pistolgrip Tac Light and a Knights Armament rails system. The lower is a stock Eagle arms with an LMT buttstock but I am planning for a trigger kit in the near future. http://i42.photobucket.com/albums/e347/jasf316/Picture001.jpg http://i42.photobucket.com/albums/e347/jasf316/Picture002.jpg http://i42.photobucket.com/albums/e347/jasf316/Picture003.jpg http://i42.photobucket.com/albums/e347/jasf316/Picture004.jpg |
|
I just LOVE the PRS! The following parts are... CMC 2 stage trigger SPR grip PRS SWS tube ARMS, Harris bipod and Pod-Lock ARMS #35 base and medium #35 rings Loopy M3 mildot GG&G MAD Larue gas block and I have a MI Troylike fornt sight on it's way to me from Bravo Co. 
|
Lets see your AR-10s (Page 7 of 60)
AR Sponsor
Join the Community
Your next conversation starts here.
Create your free account to join discussions, share your experience, save topics, and connect with the AR15.COM community.
- Join discussions
- Follow topics and replies
- Connect with fellow enthusiasts
Already a member? Sign in
Stay informed by subscribing to our Newsletter