AR Sponsor
You Must Be Logged In To Vote
|
Nice |
Joined:
Jul 2022
Posts:
49
EE: 0% (0)
NC, USA
|
Originally Posted By 11boomboom: Deets? Originally Posted By 11boomboom: Deets? Originally Posted By Primetime_1: I'll second....give us the specs Here you go Lower - LMT MARS L, SBR - Geissele SSAE-X - Driven Arms Co SCG grip - Magpul CTR - FCD Trigger Pins - FCD 50° q lever Safety - FCD Take Down Pins - FCD End Plate - FCD A5 Castle Nut - FCD A5 Buffer Tube - FCD Buffer Retainer - FCD Mag Catch & Release - FCD Bolt Release for LMT - BCM Mk.2 Buffer, T1 - Geissele Super 42 Rifle Spring Upper - LMT SpecWar Upper Receiver - LMT Enhanced Carrier HM Nitride Coated by RCA, LMT Enhanced Bolt, FCD/SOTAR Cam Pin - FCD Low Drag FA - Geissele USASOC Airborne Charging Handle - FCD Port Door Cover - Triarc Track 3.0 12.5" Midlength Barrel converted by d.Wilson for LMT MRP - Riflespeed RS7524 Gasblock - Aparition Instruments Nano MD - B&T Print XH SC, Munkworks Recessed 1x16 LH Mount - Railscales XOS-H, XOS-W Rail Covers, Railscales Karve-P - Modlite PLHV2 Head, Arisaka Body, Surefire DS00 Tailcap, Unity Axon Switch, FCD Cable Management Mlok Panels, Arisaka Inline Scout Mount - Scalarworks BUIS - Reptilia AUS 1.70" - Vortex Razor Gen 3 1-10 |
|
Originally Posted By ObiWanKannoli: Here you go Lower - LMT MARS L, SBR - Geissele SSAE-X - Driven Arms Co SCG grip - Magpul CTR - FCD Trigger Pins - FCD 50° q lever Safety - FCD Take Down Pins - FCD End Plate - FCD A5 Castle Nut - FCD A5 Buffer Tube - FCD Buffer Retainer - FCD Mag Catch & Release - FCD Bolt Release for LMT - BCM Mk.2 Buffer, T1 - Geissele Super 42 Rifle Spring Upper - LMT SpecWar Upper Receiver - LMT Enhanced Carrier HM Nitride Coated by RCA, LMT Enhanced Bolt, FCD/SOTAR Cam Pin - FCD Low Drag FA - Geissele USASOC Airborne Charging Handle - FCD Port Door Cover - Triarc Track 3.0 12.5" Midlength Barrel converted by d.Wilson for LMT MRP - Riflespeed RS7524 Gasblock - Aparition Instruments Nano MD - B&T Print XH SC, Munkworks Recessed 1x16 LH Mount - Railscales XOS-H, XOS-W Rail Covers, Railscales Karve-P - Modlite PLHV2 Head, Arisaka Body, Surefire DS00 Tailcap, Unity Axon Switch, FCD Cable Management Mlok Panels, Arisaka Inline Scout Mount - Scalarworks BUIS - Reptilia AUS 1.70" - Vortex Razor Gen 3 1-10 I think a 12.5 with a K can is the prefect LPVO setup. How's the backpressure with the print XC? |
|
Gonna play with this Frankenstein for a bit. BCM upper BCM BCG BCM ambi charging handle BCM MCMR 15" rail BRT 16" Optimum CL barrel with gas system Surefire 3-prong Surefire RC2 KAC 600m commercial sights Anderson lower CMMG parts kit ARC-FIRE V1 trigger Larue A-peg grip BCM buffer tube Sprinco Red buffer spring LBE H3 buffer Magpul CTR stock Magpul MS1 sling with DD QDs Attached File |
Why is the sky blue?
What makes the green grass grow?
What makes the green grass grow?
Joined:
Jul 2022
Posts:
51
EE: 0% (0)
NC, USA
|
Originally Posted By Primetime_1: I think a 12.5 with a K can is the prefect LPVO setup. How's the backpressure with the print XC? Absolutely agreed. The back pressure is effectively non existent between the LMT eBCG, mid length gas with Riflespeed agb, and the Print XH. Its definitely not the quietest can out there, but its light weight, compact, and quiet enough. The sparking on mine dropped off significantly after 1k Rounds. For the $600 I paid for mine, im happy. |
|
Originally Posted By ObiWanKannoli: Absolutely agreed. The back pressure is effectively non existent between the LMT eBCG, mid length gas with Riflespeed agb, and the Print XH. Its definitely not the quietest can out there, but its light weight, compact, and quiet enough. The sparking on mine dropped off significantly after 1k Rounds. For the $600 I paid for mine, im happy. Did you ever shoot it without the AGB? I had a Saker k on a 12.5 mid Sionics w/ the restricted gas port and it was a great setup. Of course, restless rifle syndrome struck 
|
Joined:
Jul 2022
Posts:
52
EE: 0% (0)
NC, USA
Just the old m4a1 6/9/26 drills Attached File |
Do Good
Be Dangerous
Live Free
Be Dangerous
Live Free
Let’s keep it going: Top one is a 14.5 URG-I “near clone” upper Razor 1-6 Acro P2 SureFire DFT2 Turbo SureFire RC2 MODTAC suppressor shield Aero lower w G$ parts kit SSA-E X Bottom one is 11.5 URG-I near clone SureFire RC2 SureFire DFT1 Turbo Aimpoint T2 Unity magnifier Ancient Stag lower before their decline G$ 3 gun trigger |
|
This is my main again: Attached File My "go-to" is still my 14.5 SOCOM build, but I'm building a dedicated lower for it since I got my MK18 upper back. Attached File |
Why is the sky blue?
What makes the green grass grow?
What makes the green grass grow?
Lots of drills today 6/22/26 drop down to the prone. 2 shots at 100 yards  6/22/26 drills. Multiple targets while moving I got a ton of malfunctions today. I attribute them to my reloading practice. I reload my reloads multiple times and only toss them when they split necks. Last few loading sessions I noticed a bunch of primers that seated realy light but I figured they were tight enough. Dummy. Ive never had so many popped primers in my life. Eventually I got a primer that locked up my selector. Im going to have to shoot through about 40 mags and gauge the primer pockets before loading them again. |
Do Good
Be Dangerous
Live Free
Be Dangerous
Live Free
Took the SPR out to the (formerly IWI) E Coast gas gun match and ended up taking first / 69. This is a first for me. I am mostly a 2 gun and pistol shooter, and it's great to be able to take one rifle to a 2 gun match that's caps at 100 yd one day, then shoot to 700+ the next.  Specs are, Mk2 lower SSA-E trigger BCM stock Geissele super 42 buffer kit Larue upper receiver set SOLGW SPR barrel FCD Keymo brake Random bolt Riflespeed gas BCM charging handle with silicon seal Harris bipod on a stud ATACR MIL-R in ADM 1.54 mount T2 in arisaka offset mount TLR VIR |
|
Originally Posted By 03RN: Lots of drills today  https://www.youtube.com/watch?v=TqsHUZIg3VQ https://www.youtube.com/watch?v=q_JuGuZuoT0I got a ton of malfunctions today. I attribute them to my reloading practice. I reload my reloads multiple times and only toss them when they split necks. Last few loading sessions I noticed a bunch of primers that seated realy light but I figured they were tight enough. Dummy. Ive never had so many popped primers in my life. Eventually I got a primer that locked up my selector. Im going to have to shoot through about 40 mags and gauge the primer pockets before loading them again. Quoting myself because more malfunctions with the same batch of reloads.  M16A4  Transitions, reloads, and malfunctions  Shoot and movement drills  More drills 6/29/26 |
Do Good
Be Dangerous
Live Free
Be Dangerous
Live Free
|
Attached File 1990s Bushmaster SL upper Mixed lower internals, Continental Machine lower rec Trijicon reflex, rebuilt by Trijicon H1 buffer, Brownells buffer spring Blackhawk sling Go to carbine for 30 years. As in poker, never switch a winner.. |
Another old guy
Joined:
Jan 2022
Posts:
1479
EE: 0% (0)
USA
This has been my regular truck gun for a while. 10.3 chrome lined pencil profile. Noveske rail and milspec receivers. Super lightweight. Polo K suppressor, but I'm looking to get something a little smaller. Thinking Rhodoie K or Tisha.
|
What have the Romans ever done for us?
Joined:
Jul 2008
Posts:
45966
EE: 100% (212)
TN, USA
|
Originally Posted By -OdieGreen-: Could be possible RQRWS syndrome like I have. (Realizing quad rails were superior.)  https://www.ar15.com/media/mediaFiles/61399/Photoroom_20260527_111204_jpeg-3774852.JPG @-odiegreen- how do you like the BCM quad rail? I need a 12" for a 14.5 upper. Want an OG LaRue but they are vaporware and if you do find one like $400. |
Panem et Circenses
I have also learned from experience that the greater part of our happiness or misery depends upon our dispositions, and not upon our circumstances.
Kites rise highest against the wind, not with it. - Churchill
I have also learned from experience that the greater part of our happiness or misery depends upon our dispositions, and not upon our circumstances.
Kites rise highest against the wind, not with it. - Churchill
|
Originally Posted By Finslayer83: @-odiegreen- how do you like the BCM quad rail? I need a 12" for a 14.5 upper. Want an OG LaRue but they are vaporware and if you do find one like $400. It’s probably my favorite rail but haven’t used any laser aiming devices. Irons hold zero and it’s a thermal fit on the barrel nut. (You’ll see people who beat the rail on with a hammer complain the barrel nut design is bad regarding that.) Waiting on another sale to replace a couple other rails with QRF’s actually. |
|
Mine has been solid but I cant vouch for it shifting poi of lasers or sights Attached File |
Do Good
Be Dangerous
Live Free
Be Dangerous
Live Free
|
Go to HD/night rifle Upper: BCM upper, Geissele 10.3" barrel & gas system, G REBCG, G ACH, G 9.3" MK14, ECCO 5x5 with YHM sRx mini brake, Holosun AEMS on china Unity mount to test height, Holosun IRIS 4 green Lower: PSA lower, CMMG ambi mag release, G buffer tube, G Super 42 w/H2, G SSA-E X, ARC-Fire V2, B5 grip, CTR stock  Go to "do all" rifle Upper: Geissele upper, Centurion 12.4" 6 ARC barrel, Griffin adjustable gas block, Griffin gas pocket carrier w/Rexus bolt, G ACH, 13.5" G MK14 chopped to 11.75", OCL Polonium with YHM sRx mini brake, Vector 2-12 in Reptilia mount (will eventually add a red dot) Lower: APC lower, CMMG ambi mag release, G Super 42 w/H2, G SSA, FCD ASF-50Q, B5 grip, B5 Bravo stock 
|
AR Sponsor