Posted: 7/1/2012 2:39:20 PM EDT
| Can anyone recommend a gunsmith around Orange county, having difficulty with trigger installation. |
|
Quoted:
Ordered an ALG defense combat trigger for a stripped CD-15 defense lower, installed the trigger and disconnector but cannot get the hammer and pivot pin through (keeps getting misaligned) and don't want to damage the receiver. Did you try using a punch to align the hammer while under tension from the spring? |
|
Yeah I tried using a 1/8 punch to help align the pivot hammer but every time I get the pivot pin started it seems to offset the hammer by a couple millimeters preventing me from driving the pin through the hole on opposite side (simply initiating the pivot pin pulls hammer to one side) the ...I've tried a few dozen times and am growing increasingly frustrated... I installed a DD trigger before and it was not this tight or difficult.
Sloatsburg area... |
|
Quoted:
Yeah I tried using a 1/8 punch to help align the pivot hammer but every time I get the pivot pin started it seems to offset the hammer by a couple millimeters preventing me from driving the pin through the hole on opposite side (simply initiating the pivot pin pulls hammer to one side) the ...I've tried a few dozen times and am growing increasingly frustrated... I installed a DD trigger before and it was not this tight or difficult. Sloatsburg area... Does the pin fit through the hammer when not in the receiver? |