Posted: 2/8/2012 9:34:23 AM EDT
| Anybody know of a place that does good installs at a good price. The ones I've seen are about $65 |
|
Have you checked AO?
I to need to do this soon. Still debating on which is better the cut and drill knobs or the turn and thread knobs. Which one are you doing and why?edit for hot link to AO |
|
I went with this guy Keith from Pheonix Custom Rifles... excellent work and turned around in a day or two (plus shipping times). I got the 'Marksman' knob and am very pleased.
Here is lots of pics from sniper's hide forum. click here |
|
Quoted:
Have you checked AO? I to need to do this soon. Still debating on which is better the cut and drill knobs or the turn and thread knobs. Which one are you doing and why?edit for hot link to AO I watched Jason at AO for a few hours the other day do several bolt handles. They turn down the knob then thread it. The inside of a 700 handle will actually have tiny voids in the metal....the turn and thread leaves you with a whole lot more material and strength...It really is crazy to see the work they go threw just for a bolt knob. |
|
Quoted:
Thanks for the reminder. I've been meaning to get this done for awhile. Sent Rem700 bolt out UPS to AO today for a Badger Ord knob. 
Is it ready yet? 
Shipped it out five days ago (Thursday) and received it back today (following Tuesday). How is that for quick turnaround? Nice job Mark!
|
| Went with this one - not fancy but works fine and is cost effective: LINK |
|
Quoted:
Quoted:
Thanks for the reminder. I've been meaning to get this done for awhile. Sent Rem700 bolt out UPS to AO today for a Badger Ord knob.
Is it ready yet?
Shipped it out five days ago (Thursday) and received it back today (following Tuesday). How is that for quick turnaround? Nice job Mark! Pics with the knob removed please |
|
Quoted:
Quoted:
Quoted:
Thanks for the reminder. I've been meaning to get this done for awhile. Sent Rem700 bolt out UPS to AO today for a Badger Ord knob.
Is it ready yet?
Shipped it out five days ago (Thursday) and received it back today (following Tuesday). How is that for quick turnaround? Nice job Mark! Pics with the knob removed please We red Locktite (yes, see there actually IS a right time and place for red  ) the knobs on. I wouldn't try removing one as it may damage the knob.
Do you want a picture of how we thread them? Thanks for the business, Brownie63. We appreciate it. We batch up certain tasks sometimes and the knobs are one of those. Thus, the fast turnaround. 
Mark |
|
Red loctite :)
Fro mentioned something about voids in the handle while threading. I was actually curious if you cutoff see those in the threads. Does it show up the threads having a gap in them? Or am I just completely missing what he was saying? But, while I have you here, you turn down the handles instead of cutting them off and drilling a hole for an insert right? What's the difference in the two? Why one over there other? I am just curious. |
|
Yes, we thread the outside of the handle. Yes, the Remington handles often have voids.
This is a picture of a fairly typical void although this is on the larger side; many voids are much smaller. 
Threading the exterior of the handle provides the greatest structural integrity once the knob is in place. The void simply doesn't matter. We very much believe this is the strongest way to install a bolt handle. Don't worry much about the voids. They really aren't that big of a deal. Hope this helps. Mark |
|
I was wondering when someone was going to do that. At one time, I thought of doing something similar. I'm amazed that rifle manufacturers don't just make the bolt handle threaded from the factory. It would make their rifles more versatile for a variety of scope/optics options and open up a whole new industry of bolt handle designs and finishes. Kind of like the variety of shifter knobs for cars. |
| Many modern actions do come with threaded handles. It is more conducive to their manufacturing process. My guess regarding Remington 700s is that re-tooling from a cast handle they have been making for decades to a blank that can easily be threaded would add more cost to the rifle than the bean-counters can stomach. That, and FGI lawyers may somehow imagine a scenario where a loosened bolt knob can inadvertently cause a shooter to aim at a bystander's head and pull the trigger. |
|
Quoted:
Yes, we thread the outside of the handle. Yes, the Remington handles often have voids. This is a picture of a fairly typical void although this is on the larger side; many voids are much smaller. http://i1101.photobucket.com/albums/g426/AccurateOrdnance/Damage%20and%20Problems/boltVoidLarge.jpg Threading the exterior of the handle provides the greatest structural integrity once the knob is in place. The void simply doesn't matter. We very much believe this is the strongest way to install a bolt handle. Don't worry much about the voids. They really aren't that big of a deal. Hope this helps. Mark Wow! Interesting!!! I guess cast really does leave voids.... Thanks for the education! |
|
Quoted:
Quoted:
That's pretty weird looking with that void. Yep. First time I saw one I about freaked out. Then I was amazed to find out how common it is to find these. Now I'm over it. 
Mark Sounds like that time in elementary school when I accidentally wandered into the wrong locker room!
|
| The voids are a non-issue as long as something is covering it and structurally supporting it, like the metal from an unmodified knob, or a screw-on knob that is glued-on. If you think about it, most strong structures have intentional voids- either to improve rigidity for its mass, or reduce weight. On top of that, the end of the handle at the knob is one of the less-stressed parts. |