Posted: 5/26/2015 3:45:10 PM EDT
| Anyone in the North Haven area have a AK rivet tool I could use/borrow? I have an Izhmash that I converted with a CSS kit. I would like to replace the machine screws used in that kit with rivets. Have to weld up the old fire control holes, too. Thanks. |
|
Quoted:
I appreciate it, but I just need the rivet tool for the triggerguard. After looking into it, I should be able to take care of it with my shop press and a dimpled piece of steel for a bucking bar I've got one you can borrow or use, located in North Branford. |
|
Quoted:
I've got one you can borrow or use, located in North Branford. Quoted:
Quoted:
I appreciate it, but I just need the rivet tool for the triggerguard. After looking into it, I should be able to take care of it with my shop press and a dimpled piece of steel for a bucking bar I've got one you can borrow or use, located in North Branford. Figured you would get here sooner or later- glad for the op that you have arrived! 
|
|
Quoted:
Figured you would get here sooner or later- glad for the op that you have arrived! Quoted:
Quoted:
Quoted:
I appreciate it, but I just need the rivet tool for the triggerguard. After looking into it, I should be able to take care of it with my shop press and a dimpled piece of steel for a bucking bar I've got one you can borrow or use, located in North Branford. Figured you would get here sooner or later- glad for the op that you have arrived! I've got a spare.  honestly I've had some bad luck with some folks on here as of late so I was hesitant to offer my assistance, but as I said, I have a spare.
|
|
Quoted:
I've got a spare. honestly I've had some bad luck with some folks on here as of late so I was hesitant to offer my assistance, but as I said, I have a spare.Quoted:
Quoted:
Quoted:
Quoted:
I appreciate it, but I just need the rivet tool for the triggerguard. After looking into it, I should be able to take care of it with my shop press and a dimpled piece of steel for a bucking bar I've got one you can borrow or use, located in North Branford. Figured you would get here sooner or later- glad for the op that you have arrived! I've got a spare. honestly I've had some bad luck with some folks on here as of late so I was hesitant to offer my assistance, but as I said, I have a spare.Sorry to hear that! Never actually had any bad experiences with folks here.... Well, most folks here 
|