Posted: 1/15/2014 2:41:17 PM EDT
| WHATS EXERYONE USING FOR CHARGING HANDLES ON THERE AR? |
|
Quoted:
WHY IS ERABODY YELLING?! Badger tactical on a stock lever. BCM Mod 3 and 4 I got pinched with the 4 on the SBR, I may go back to the Badger. I got it cheap as a blem I will sell it for 2x what I paid for it BCM CHARGING HANDLE IS BEST CHARGING HANDLE MIL SPEC MAGNETIC PARTCLE AND CHROME TESTED BUILT TO COLT TECHNICUL DATAH PACKAGE ALL OTHER ARE SHIT AND WILL LEAVE YOU DEAD OR LOOKING LIKE ROCK RIVER DPMS USING FAILURE ON CARBINE COURSE WITH INSTRUCTOR DU JOIR BCM BEST 
|
|
Quoted:
WHATS EXERYONE USING FOR CHARGING HANDLES ON THERE AR? I use a PRI Gas Buster charging handle. I noticed that when using my .22 LR adapter, hot gasses and burned powder particles were spouting up from the gap between the lower and upper receivers and right into my face. This is because when firing .556 most of that crap goes down the barrel and into the gas tube while in a .22 LR it all stays in the receiver to push the bolt back in a blowback operation. These handles are designed to shield the escaping gasses from the receiver gap (plus the gas coming down the gas tube) and vent them off to the side. I don't want to sound like a commercial for PRI but they work extremely well. In case anyone cares.... PRI Gas Buster charging handle at Midway Inc 
|
|
Quoted:
I use a PRI Gas Buster charging handle. I noticed that when using my .22 LR adapter, hot gasses and burned powder particles were spouting up from the gap between the lower and upper receivers and right into my face. This is because when firing .556 most of that crap goes down the barrel and into the gas tube while in a .22 LR it all stays in the receiver to push the bolt back in a blowback operation. These handles are designed to shield the escaping gasses from the receiver gap (plus the gas coming down the gas tube) and vent them off to the side. I don't want to sound like a commercial for PRI but they work extremely well. In case anyone cares.... PRI Gas Buster charging handle at Midway Inc http://media.midwayusa.com/productimages/880x660/Primary/282/282711.jpg Quoted:
Quoted:
WHATS EXERYONE USING FOR CHARGING HANDLES ON THERE AR? I use a PRI Gas Buster charging handle. I noticed that when using my .22 LR adapter, hot gasses and burned powder particles were spouting up from the gap between the lower and upper receivers and right into my face. This is because when firing .556 most of that crap goes down the barrel and into the gas tube while in a .22 LR it all stays in the receiver to push the bolt back in a blowback operation. These handles are designed to shield the escaping gasses from the receiver gap (plus the gas coming down the gas tube) and vent them off to the side. I don't want to sound like a commercial for PRI but they work extremely well. In case anyone cares.... PRI Gas Buster charging handle at Midway Inc http://media.midwayusa.com/productimages/880x660/Primary/282/282711.jpg I have heard lots of good things about the Gas Buster, I may have to try one at some point. |
|
Quoted:
I have heard lots of good things about the Gas Buster, I may have to try one at some point. Quoted:
Quoted:
Quoted:
WHATS EXERYONE USING FOR CHARGING HANDLES ON THERE AR? I use a PRI Gas Buster charging handle. I noticed that when using my .22 LR adapter, hot gasses and burned powder particles were spouting up from the gap between the lower and upper receivers and right into my face. This is because when firing .556 most of that crap goes down the barrel and into the gas tube while in a .22 LR it all stays in the receiver to push the bolt back in a blowback operation. These handles are designed to shield the escaping gasses from the receiver gap (plus the gas coming down the gas tube) and vent them off to the side. I don't want to sound like a commercial for PRI but they work extremely well. In case anyone cares.... PRI Gas Buster charging handle at Midway Inc http://media.midwayusa.com/productimages/880x660/Primary/282/282711.jpg I have heard lots of good things about the Gas Buster, I may have to try one at some point. I've been meaning to do this on my entry length stock'ed AR. |
|
Quoted:
i got an email today from Primary Arms. They have the medium or large BCM's for $35.99. Not as cheap as the BCM irregulars but not bad...... http://www.primaryarms.com/Charging-Handles-s/271.htm Anyone not owning one should buy this Everything else is a flimsy piece of shit in comparison |
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.