|
Ummm... I can help, but you need to narrow things down a bit. Your question is a lot more involved than you think. The first thing you need to do is to visit www.falfiles.com/index. If you want the simple answer, its not the cheapest, but will get you an extremely nice FAL. Buy a DSA receiver. I think www.warrifles.com has a group buy at the moment with a price of $335 or so. Get a type 1 or type 2. They just look better. Then, buy an STG kit from FAC. You'll need 6 more compliance parts and you can select the combo that you like the best. DSA sells the following: hammer/trigger/sear combo (3 parts) pistol grip forend butt stock gas piston charging handle trigger housing (lower receiver) Tools? If you're only building one or two, don't buy tools. Just mooch off me or somebody else that has them. You really need a big-ass vice, barrel vice, receiver wrench, breaker bar and a big friggin' hammer. Dremel tools are always handy as well. Does that give you a way to get started? |
|
thanks for advice cliffy i have looked at the STG kits in FAC but the DSA receiver may be more than i want to invest right now. Im working on a couple of AR's /AK's........ how about one of those cheaper receivers from FAC. I would like to keep it under $600 if possible . haha But, I do have a dremel tool thanks again |
"Moses" on the flafiles has cut 3 different barrels for me in the past. never more than 2 weeks turnaround. (2 of the three took a week) I think its $40 for a cut and rethread. I can send you his email if your interested. Oh, and moses always "opens" the gas port the the correct size free with every cut.  I think he went a little crazy on my para though, I could peg the ISS with brass with that thing.........guess I cant say it dosent work. |
|
I know Steve (cliffy109) and he is Class. One other answer: The FAL Files See the Gunsmihting/Build It Yourself Forum. Resistance is Futile: We are FAL-Borg! 
|