Posted: 4/4/2009 4:08:41 PM EDT
| Awhile back some one had mentioned being unable too host a build party or not wanting too do one . But offered up tools too be lent out i would be very appreciative currently i need a press too get the barrel off too start the demil then ill beg for the rest of the tools im in eatonville if any one can help thanks. Im me please if ya dont want too be begged by every ak wanna-be builder (myself included as a wanna be) |
| You can get a bearing puller from HF for around $10 and use a vise and a BFH for the barrel pin if it comes down to it. What kind of kit? The Romy barrel pins are a royal PITA to get out, soak 'em for a good 24 hours in Kroil before even thinking about getting them to budge. |
| its a yugo kit with an amd 65 rear assy i didnt even think about soaking it i will have too do that. I was leary of the hammer i read some where that someone had mushroomed out the head of their barrel pin making it a royal pain too do but that guy also used a center punch or some undersized punch ill soak and try tommarro w the b f h |