I have a METRIC FAL built on an Imbel receiver. Not sure of the "type but it does have the cut for the carry handle although none is included. I beleive the parts kit it was built on was FN if I remember corectly. This was purchased in a gunstore Nashua NH "Heritage"and was pretty much new when purchased and not back yard Billy assembled. I have not added any "US parts but it was sold in this configuration.
The receiver says Pacific armament corp Modesto CA "Assembled By CAI"
The barrel has been cut by me to 18.25" but still needs to be crowned. I have fired it and it is very reliable and is battle accurate. The buttstock also needs a rubber buttpad. I started filing the stock end and was going to shorten the LOP but lost interest. The new butpad will cover all the file marks.($5) part. I installed the last round bolt open and it works well. I also purchased a picatinny top cover for mounting optics. It is of good quality and attaches to the receiver via screws. It has been painted OD with GUN KOTE. I had the entire gun painted with Krylon but stripped it with Krylon remover. It still needs to be detailed stripped to remove all the residual paint but most is removed. The barrel has the slot for the Bipod but it was removed and fiberglass hangaurds were installed. The overall finnish is in very good codition with the majority of the matte blue remaining.
Also included are 10 20 round mags most in good codition and 1 30 round mag which are vry rare.
I can take more pics if you require a more detailed veiw of a certain area.
I would like to trade for an
ACOG, TAO1 NSN or TAO1 TA 31 or 31F
Good quality 1911 full size or commander no micros
Complete A2 lower half
OD or woodland drag bag
or? lemme kno what you got.... Cash value = $650ish