Armory Sponsor
Posted: 4/17/2017 9:38:37 PM EDT
| I have a SAR-48 bush model I got back before the 1994 ban. It has always had a stiff trigger. As I get older, it is getting harder and harder to pull it accurately. It is worse than the M1A Socom or AR10 by far. Does anyone know a reputable FNologist who could lighten the trigger pull? |
|
One approach that I would recommend against is replacing the hammer spring with a lighter one. I know that no one has recommended trying that yet, but it's often what people do with pistols.
When it was dirt cheap, I bought a bunch of the S&B pale blue/green boxed 7.62mm NATO ammo with the black stained primers (ZV69). In my new (at the time) SAR-48 (standard rifle), I had a fairly high failure to fire rate with this ammo with hard primers. The second strike would always fire the round. This same ammo is 100% in an M98. I tried replacing the hammer spring with a slightly 'heavier' one and it helped considerably, but didn't completely fix the problem. The SAR-48 has always been 100% with the other ammo that I have fired in it, including Portuguese (which is known to be problematic this way in some rifles). Just sayin'... Forrest |
|
Quoted:
The trigger on my favorite FAL is about 10 pounds. It has never been an issue...I hate light triggers. If it is creepy, then yeah, get it looked at. But chasing light triggers in the FAL often ends in malfunctions. |
|
FAL's have a fairly smooth trigger but are heavy. Smoothing out everything related to the trigger helps and is a good idea but the trigger spring is the most important to address. If you want a target trigger on a FAL it can be done fairly easily with the stock parts. A 3 pound trigger that breaks like glass can be made fairly easily with stock parts.
If someone wants a lighter trigger then cut a bit off the trigger spring. Cutting the trigger spring shorter gives the ability to add washers to the rear of the spring and adjust the pull weight as you desire. Once the trigger has been smoothed / polished out and the (length of pull shortened if wanted) and the weight of pull is lowered a FAL ends up with a very nice trigger. I think the FAL stock trigger is about as easy to make into a target quality trigger as it gets. A sub 3 pound trigger on a FAL should be reserved for a bench rest gun because it can become dangerous for anything else. |
Armory Sponsor