I just installed a SAW pistol grip on my DSA SA58 and the trigger guard is loose. Is there a fix for this or will I have to send it back?
Posted: 4/1/2004 11:39:58 AM EDT
[#1]
All you need to do is bend the trigger guard slightly so it does not lay flat against the lower receiver and reinstall the grip. The tab that goes under the grip should be about 1/4" above the lower when it is installed before you put the grip on.
Posted: 4/1/2004 12:20:39 PM EDT
[#2]
blfuller
Thanks for the info. I'll give it a try.
Posted: 4/1/2004 7:17:20 PM EDT
[#3]
That will fix it, had to slightly bend that tab a little up on mine. Also you need to do this on a couple of other US pistol grips. Should stop the wiggle.
Posted: 4/3/2004 7:20:28 PM EDT
[#4]
Well that was an easy fix.
Posted: 4/5/2004 6:39:47 AM EDT
[#5]
gee, you guys are smart... i folded up a pice of paper and wedged it in there.
