Armory Sponsor
Posted: 11/9/2015 8:07:38 PM EDT
| For the guys that have gotten the folding stock, does it simply pull open or is the folding mechanism supposed to be depressed to open? Thanks |
|
It locks closed, you need to pull up on it, you will feel it move then swing it out, locks in place after that. Mine was very difficult to move but once it did I greased it with lithium grease as one
member suggested, it's much better now. DO NOT force it, it will break. |
|
Quoted: It locks closed, you need to pull up on it, you will feel it move then swing it out, locks in place after that. Mine was very difficult to move but once it did I greased it with lithium grease as one member suggested, it's much better now. DO NOT force it, it will break. How do you apply grease without forcing it to move? Even after spraying the hinge with WD40 I still can't get mine to budge. |
| You have to leverage it up by placing your thumb on top of the receiver right behind the rear sight. Place your index and middle finger around to the underside of the stock. Push down with your thumb while pulling up with your fingers. Hope this helps. The stock will loosen up. |
|
Quoted:
You have to leverage it up by placing your thumb on top of the receiver right behind the rear sight. Place your index and middle finger around to the underside of the stock. Push down with your thumb while pulling up with your fingers. Hope this helps. The stock will loosen up. I do this as well. After ya get the hang of it its super easy. The first time I had to use a screw driver 
|
Armory Sponsor