Armory Sponsor
Strike PS90 chassis (Page 2 of 2)
|
Was not aware this was an option until seeing this thread… They’re currently sold out but it’s relatively short money to give it a go; if I don’t like it there’s always the EE. There could be a V2 coming for that matter too if Strike is amenable to useful feedback and they don’t have to reinvent the wheel I’d imagine. Mine’s SBR’d and I still need a dedicated suppressor for it. FN Specialities FRT will be on the way shortly too. It’s ALWAYS a range favorite with experienced and new shooters alike, so why not?! |
|
Originally Posted By Manticore_Arms: Man, so close to perfect. Makes me want to go make a stock for the P90/PS90. I think the Strike stock is so close to greatness, but missed on a few (ciritcal) points. If Strike had kept the FN factory length it would be perfect. The overall height is taller but that can't be helped due to the pistol grip design. I'm sure there is a way to add on a longer handguard for those who want it along with add on buttpad spacers for a longer LOP is wanted. Strike added wire channels inside from the trigger guard area towards the ejection port. Why? Are we putting speakers on the gun? There are some odd tabs inside the grip area. More add ons planned in the future? |
|
Originally Posted By MikeWhiskey: Was not aware this was an option until seeing this thread… They’re currently sold out but it’s relatively short money to give it a go; if I don’t like it there’s always the EE. There could be a V2 coming for that matter too if Strike is amenable to useful feedback and they don’t have to reinvent the wheel I’d imagine. Mine’s SBR’d and I still need a dedicated suppressor for it. FN Specialities FRT will be on the way shortly too. It’s ALWAYS a range favorite with experienced and new shooters alike, so why not?! With the cost of molds I doubt we will see any changes for a long time until sales drop off, or if sales are low and they get a lot of feedback on people wanting those changes. |
Your best source for bullpup upgrades including the Hellion, Tavor, and AUG! www.manticorearms.com
|
I tried to make AI generate what I was trying to theorize but either I suck or it sucks or both I think a gen 2 P90 stock could be sweet, keep most of the original stock design but make the pistol grip more vertical Get rid of the front grip and meld it into a handguard that would go over the barrel or suppressor so that you grip the handguard with your offhand like a normal rifle Cantilever the optic mount forward over the handguard so that you can use a keltec 100 round doubled magazine basically nothing like this 
|
|
Originally Posted By cj3waker: I tried to make AI generate what I was trying to theorize but either I suck or it sucks or both I think a gen 2 P90 stock could be sweet, keep most of the original stock design but make the pistol grip more vertical Get rid of the front grip and meld it into a handguard that would go over the barrel or suppressor so that you grip the handguard with your offhand like a normal rifle Cantilever the optic mount forward over the handguard so that you can use a keltec 100 round doubled magazine basically nothing like this https://i.imgur.com/wckaUks.png  |
|
Originally Posted By cj3waker: I tried to make AI generate what I was trying to theorize but either I suck or it sucks or both I think a gen 2 P90 stock could be sweet, keep most of the original stock design but make the pistol grip more vertical Get rid of the front grip and meld it into a handguard that would go over the barrel or suppressor so that you grip the handguard with your offhand like a normal rifle Cantilever the optic mount forward over the handguard so that you can use a keltec 100 round doubled magazine basically nothing like this https://i.imgur.com/wckaUks.png Looks like you tried to recreate the Fs2000...without the ability to use optics |
|
Originally Posted By Odinforever2000: Looks like you tried to recreate the Fs2000...without the ability to use optics Yeah what I made was a pile of trash, the mags are over 2x taller than they should be, and I couldn't prompt it to shrink them, also it was supposed to be a full length mlok handguard, and the optic wasn't supposed to mount to the handguard with some better prompting I'm here, I'll give it another go later  |
|
Originally Posted By ODA_564: So, basically the Strike chassis. Strike screwed up on one important part of the chassis in my opinion. They made the length of pull longer which annoys the shit out of me. It's no longer small or compact. Completely unnecessary. They should have kept it the stock length and since it uses a rubber butt pad they could have offered add on sections or thicker ones. I'm not crazy about the height increase but that can't be helped with the more vertical pistol grip. |
|
Originally Posted By chuck1: Strike screwed up on one important part of the chassis in my opinion. They made the length of pull longer which annoys the shit out of me. It's no longer small or compact. Completely unnecessary. They should have kept it the stock length and since it uses a rubber butt pad they could have offered add on sections or thicker ones. I'm not crazy about the height increase but that can't be helped with the more vertical pistol grip. |
Et quant au repos ? Le Caliphate doit être essuyé de la terre.
|
Originally Posted By Findsman: Kinda cool in a futuristic sci-fi action video game way. I’d try one out if it wasn’t crazy expensive; the P(S)90 is pretty easy to play with. It is likely running to get on the new SG-1 series. |
Preferred Pronoun: Space Lord Mutherfucker
Strike PS90 chassis (Page 2 of 2)
Armory Sponsor
Join the Community
Your next conversation starts here.
Create your free account to join discussions, share your experience, save topics, and connect with the AR15.COM community.
- Join discussions
- Follow topics and replies
- Connect with fellow enthusiasts
Already a member? Sign in
Stay informed by subscribing to our Newsletter