Armory Sponsor
Posted: 7/16/2009 11:33:31 AM EDT
| Recently aquired an Msar aug clone used and took it to the range after good cleaning. The problem I am having is the factory optics is approx 3 feet high at 25 yards! Whiskey tango foxtrot is right! I made sure the three screws holding the optics on were tight but it doesn't appear that I can adjust the elevation. Looks like there are 2 set screws that after removal might allow me to adjust it but I will venture to say that even after all of the elevation adjustments are maxed out I still will be high. 3 feet is a lot of room to eat up. What say you? Thanks for the help. |
|
There are no setscrews to mess with. You turn the bottom (elevation) knob by hand and you turn the cap in the three o'clock position (windage) with a coin. Leave the ten o'clock cap in place. That is where the nitrogen lives. Give me a call and I will get you taken care of.
Dave Robertson MSAR 814-363-9264 ext 19 |
Armory Sponsor